List of works - Mohammad Reza Salimpour

A 3D thermal model to analyze the temperature changes of digits during cold stress and predict the danger of frostbite in human fingers

scientific article published on 6 March 2017

A new coupling method for slip-flow and conjugate heat transfer in a parallel plate micro heat sink

A novel approach for prediction of 3-D skin structure burning with embedded branched vasculature

An experimental study on deposited surfaces due to nanofluid pool boiling: Comparison between rough and smooth surfaces

Analytical Design of Helically Coiled Heat Exchangers Used for Transient Heat Transfer Applications

Analytical expressions for estimating endurance time and glove thermal resistance related to human finger in cold conditions

scientific article published on 21 September 2017

Analytical optimization of constructal channels used for cooling a ring shaped body based on minimum flow and thermal resistances

Comparative investigation on the exergoeconomic analysis of solar-driven ejector refrigeration systems

Comparison of heat transfer coefficient for different fabrics by vapor-compression system

Constructal Optimization of Microchannel Heat Sinks With Noncircular Cross Sections

Constructal design for cooling a disc-shaped body using incomplete inserts with temperature-dependent thermal conductivities

Constructal design of cooling channels embedded in a ring-shaped heat-generating body

Constructal design of finned tubes used in air-cooled heat exchangers

scholarly article by Hossein Shokouhmand et al published June 2014 in Journal of Mechanical Science and Technology

Constructal design of high-emissivity radiation inserts embedded in a disk-shaped heat generation body

Constructal design of horizontal fins to improve the performance of phase change material rectangular enclosures

Constructal design of phase change material enclosures used for cooling electronic devices

Constructal law of vascular trees for facilitation of flow

scientific article

Constructal multi-scale structure of PCM-based heat sinks

Convective heat transfer of nanofluid flow through conduits with different cross-sectional shapes

scholarly article by Mohammad Reza Salimpour & Amir Dehshiri-Parizi published February 2015 in Journal of Mechanical Science and Technology

Design of bifurcating microchannels with/without loops for cooling of square-shaped electronic components

Design of novel geometries for microchannel heat sinks used for cooling diode lasers

Effect of groove geometry on pool boiling heat transfer of water-titanium oxide nanofluid

Effect of inserting coiled wires on pressure drop of R-404A condensation

Effect of magnetic field on thermal conductivity and viscosity of a magnetic nanofluid loaded with carbon nanotubes

scholarly article by Amin Shahsavar et al published February 2016 in Journal of Mechanical Science and Technology

Effect of surface roughness pattern on transient mixed elastohydrodynamic lubrication

Entropy generation analysis in an evaporative air-cooled heat exchanger

Experimental analysis of magnetic field effect on the pool boiling heat transfer of a ferrofluid

Experimental and numerical investigation on forced convection heat transfer and pressure drop in helically coiled pipes using TiO 2 /water nanofluid

Experimental investigation on the boiling heat transfer of nanofluids on a flat plate in the presence of a magnetic field

Experimental study of condensation heat transfer of R-404A in helically coiled tubes

Experimental study of the turbulent convective heat transfer of titanium oxide nanofluid flowing inside helically corrugated tubes

scholarly article by Mohammad Reza Salimpour et al published September 2015 in Journal of Mechanical Science and Technology

Heat transfer analysis of skin during thermal therapy using thermal wave equation

scientific article published on 18 December 2016

Micro- and Nanoscale Conductive Tree-Structures for Cooling a Disk-Shaped Electronic Piece

article by Masoud Daneshi et al published 14 February 2013 in Journal of Heat Transfer

Mixed Thermo elastohydrodynamic lubrication analysis of finite length cam and follower mechanism

scholarly article by Amir Torabi et al published March 2016 in Journal of Mechanical Science and Technology

Multi-Objective Optimization of R-404A Vapor Condensation in Swirling Flow Using Genetic Algorithms

Numerical and experimental study on the flow history effects of axial flow on the Couette–Taylor flow

Numerical simulation and experimental analysis of refrigerants flow through adiabatic helical capillary tube

Optimal Porosity in an Air Heater Conduit Filled with a Porous Matrix

Optimal mechanical and thermal architecture of high-conductivity inserts for cooling an electronic piece

article by Behzad Nazari et al published 13 May 2019 in Journal of Thermal Analysis and Calorimetry

Optimization of triangular microchannel heat sinks using constructal theory

The method of lines with numerical differentiation of the sequential temperature–time histories for a facile solution of 1-D inverse heat conduction problems

Thermodynamic analysis and optimization of air-cooled heat exchangers

USING INCOMPLETE VARIABLE CROSS-SECTION HIGHLY CONDUCTIVE INSERTS FOR COOLING A DISC

Using multi-shell phase change materials layers for cooling a lithium-ion battery

List of works by Mohammad Reza Salimpour