Search filters

List of works by Mark Taylor

A Computational Efficient Method to Assess the Sensitivity of Finite-Element Models: An Illustration With the Hemipelvis

scientific article published on 29 September 2016

A combined RSA and FE study of the implanted proximal tibia: correlation of the post-operative mechanical environment with implant migration

scientific article published in August 2004

A combined finite element method and continuum damage mechanics approach to simulate the in vitro fatigue behavior of human cortical bone

scientific article published on 01 December 1999

A finite element study on the mechanical response of the head-neck interface of hip implants under realistic forces and moments of daily activities: Part 1, level walking

scientific article published on 12 August 2017

A finite element study on the mechanical response of the head-neck interface of hip implants under realistic forces and moments of daily activities: Part 2.

scientific article

A large scale finite element study of a cementless osseointegrated tibial tray.

scientific article published on 10 June 2013

A multi-platform comparison of efficient probabilistic methods in the prediction of total knee replacement mechanics

scientific article published on 01 December 2010

A new finding on the in-vivo crevice corrosion damage in a CoCrMo hip implant

scientific article published on 15 May 2017

A novel analytical approach for determining the frictional moments and torques acting on modular femoral components in total hip replacements

scientific article published on 12 February 2015

A novel training-free method for real-time prediction of femoral strain

scientific article published on 12 February 2019

Accounting for inclusions and voids allows the prediction of tensile fatigue life of bone cement

scientific article published in May 2009

Accounting for patient variability in finite element analysis of the intact and implanted hip and knee: A review ⬇️

scientific article published on December 18, 2012

An Analytical Calculation of Frictional and Bending Moments at the Head-Neck Interface of Hip Joint Implants during Different Physiological Activities.

scientific article published on 05 December 2016

An adaptive finite element simulation of fretting wear damage at the head-neck taper junction of total hip replacement: The role of taper angle mismatch

scientific article

An intelligent system for image-based rating of corrosion severity at stem taper of retrieved hip replacement implants

scientific article published on 23 August 2018

Analysis of creep strain during tensile fatigue of cortical bone

scientific article

Application of an interface failure model to predict fatigue crack growth in an implanted metallic femoral stem.

scientific article published in March 2004

Assessing changes in subjective and objective function from pre- to post-knee arthroplasty using the Cardiff Dempster-Shafer theory classifier

scientific article published on 22 April 2015

Assessing contractile ability of the quadriceps muscle using ultrasound imaging

scientific article published on 01 October 2010

Assessment of the effect of mesh density on the material property discretisation within QCT based FE models: a practical example using the implanted proximal tibia

scientific article published on 01 February 2003

Biomechanical changes and recovery of gait function after total hip arthroplasty for osteoarthritis: a systematic review and meta-analysis

scientific article published on 21 February 2018

Bone remodelling inside a cemented resurfaced femoral head

scientific article published on 20 March 2006

Cancellous bone stresses surrounding the femoral component of a hip prosthesis: an elastic-plastic finite element analysis

scientific article published on 01 October 1995

Cement mantle fatigue failure in total hip replacement: experimental and computational testing

scientific article published on 27 October 2006

Comparison of long-term numerical and experimental total knee replacement wear during simulated gait loading.

scientific article published on 3 November 2006

Computational assessment of the effect of polyethylene wear rate, mantle thickness, and porosity on the mechanical failure of the acetabular cement mantle

scientific article published on 01 May 2010

Computational modelling of cell spreading and tissue regeneration in porous scaffolds.

scientific article published on 18 December 2006

Computationally efficient prediction of bone-implant interface micromotion of a cementless tibial tray during gait

scientific article published on 19 February 2014

Could passive knee laxity be related to active gait mechanics? An exploratory computational biomechanical study using probabilistic methods.

scientific article

Damage accumulation, fatigue and creep behaviour of vacuum mixed bone cement

scientific article published in September 2005

Damage rate is a predictor of fatigue life and creep strain rate in tensile fatigue of human cortical bone samples

scientific article

Determination of suitable sample sizes for multi-patient based finite element studies

scientific article published on 10 January 2007

Development of a statistical model of knee kinetics for applications in pre-clinical testing

scientific article published on 24 October 2011

Development of a surrogate model based on patient weight, bone mass and geometry to predict femoral neck strains and fracture loads.

scientific article published on 27 February 2017

Do capsular pressure and implant motion interact to cause high pressure in the periprosthetic bone in total hip replacement?

scientific article published on 01 December 2011

Effect of bone material properties on the initial stability of a cementless hip stem: a finite element study

scientific article published in July 2005

Effect of varus/valgus malalignment on bone strains in the proximal tibia after TKR: an explicit finite element study

scientific article published in February 2007

Efficacy and efficiency of multivariate linear regression for rapid prediction of femoral strain fields during activity

scientific article published on 11 December 2018

Efficient computational method for assessing the effects of implant positioning in cementless total hip replacements

scientific article published on 4 February 2011

Evaluating the primary stability of standard vs lateralised cementless femoral stems - A finite element study using a diverse patient cohort

scientific article published on 05 September 2018

Experimental-computational evaluation of human bone marrow stromal cell spreading on trabecular bone structures.

scientific article published on 19 March 2009

Factors affecting the static shear strength of the prosthetic stem-bone cement interface

scientific article published on 01 January 2003

Fatigue characterization of a polymer foam to use as a cancellous bone analog material in the assessment of orthopaedic devices.

scientific article

Finite element analysis of a total ankle replacement during the stance phase of gait.

scientific article published on 13 June 2005

Finite element analysis of poor distal contact of the femoral component of a cementless hip endoprosthesis

scientific article published on 01 January 1993

Finite element analysis of the human ACL subjected to passive anterior tibial loads

scientific article published on 01 February 2004

Finite element analysis of the implanted proximal tibia

article

Finite element analysis of the initial stability of ankle arthrodesis with internal fixation: flat cut versus intact joint contours

scientific article published on 01 March 2003

Finite element analysis of the resurfaced femoral head

scientific article

Finite element analysis of unicompartmental knee arthroplasty

scientific article published on 07 November 2009

Finite element modelling of glenohumeral kinematics following total shoulder arthroplasty.

scientific article published on 30 September 2005

Four decades of finite element analysis of orthopaedic devices: where are we now and what are the opportunities?

scientific article published on 18 December 2014

Glenohumeral kinematics following total shoulder arthroplasty: a finite element investigation

scientific article published in January 2007

Influence of collars on the primary stability of cementless femoral stems: A finite element study using a diverse patient cohort.

scientific article published on 21 September 2017

Influence of femur size and morphology on load transfer in the resurfaced femoral head: A large scale, multi-subject finite element study.

scientific article published on 14 June 2012

Influence of geometry and materials on the axial and torsional strength of the head-neck taper junction in modular hip replacements: A finite element study

scientific article published on 7 January 2016

Influence of head constraint and muscle forces on the strain distribution within the intact femur

scientific article published on 01 September 2000

Influence of loading and activity on the primary stability of cementless tibial trays

scientific article published on 20 January 2012

Influence of stems and metaphyseal sleeve on primary stability of cementless revision tibial trays used to reconstruct AORI IIB defects

scientific article published on 07 April 2019

Influence of varying stem and metaphyseal sleeve size on the primary stability of cementless revision tibial trays used to reconstruct AORI IIA defects. A simulation study.

scientific article published on 12 January 2018

Initial stability of ankle arthrodesis with three-screw fixation. A finite element analysis

scientific article published in August 2004

Investigation into the affect of cementing techniques on load transfer in the resurfaced femoral head: a multi-femur finite element analysis

scientific article published on 31 January 2007

Investigation into the effect of varus-valgus orientation on load transfer in the resurfaced femoral head: a multi-femur finite element analysis

scientific article published on 04 June 2007

Joint loading asymmetries in knee replacement patients observed both pre- and six months post-operation

scientific article published on 07 August 2013

Mathematical modelling of skeletal repair.

scientific article published on January 2004

Measurement of strains experienced by viscerofugal nerve cell bodies during mechanosensitive firing using digital image correlation

scientific article published on 11 August 2016

Mechanical properties of single bovine trabeculae are unaffected by strain rate.

scientific article

Minimal-resection arthroplasty to treat meniscal tears with associated condyle lesions: finite element analysis

scientific article published on 01 April 2009

Modelling Human Locomotion to Inform Exercise Prescription for Osteoporosis

scientific article published on 25 April 2020

On the importance of considering porosity when simulating the fatigue of bone cement

scientific article published in August 2005

Patient and surgical variability in the primary stability of cementless acetabular cups: A finite element study

scientific article published on 22 February 2020

Periprosthetic wear particle migration and distribution modelling and the implication for osteolysis in cementless total hip replacement

scientific article published on 18 January 2014

Predicted knee kinematics and kinetics during functional activities using motion capture and musculoskeletal modelling in healthy older people ⬇️

scientific article published on December 18, 2010

Primary stability of a cementless acetabular cup in a cohort of patient-specific finite element models

scientific article

Sampling strategies for approximating patient variability in population-based finite element studies of total hip replacement

scientific article published on 18 November 2018

Sensitivity analysis of a cemented hip stem to implant position and cement mantle thickness.

scientific article published on 13 February 2013

Should the cement mantle around the femoral component be thick or thin?

scientific article published on 01 January 2003

Similar damage initiation but different failure behavior in trabecular and cortical bone tissue

scientific article

Simulation of a knee joint replacement during a gait cycle using explicit finite element analysis

scientific article published on 01 February 2002

Statistical modelling of the whole human femur incorporating geometric and material properties

scientific article published on 20 November 2009

Statistical shape modelling versus linear scaling: Effects on predictions of hip joint centre location and muscle moment arms in people with hip osteoarthritis

scientific article published on 24 January 2019

Strain patterns during tensile, compressive, and shear fatigue of human cortical bone and implications for bone biomechanics

article

Stress and strain distribution within the intact femur: compression or bending?

scientific article published on 01 March 1996

Targeted computational probabilistic corroboration of experimental knee wear simulator: the importance of accounting for variability.

scientific article

The importance of tibial alignment: finite element analysis of tibial malalignment

scientific article published on 01 December 2000

Three-dimensional finite element modelling of the human ACL: simulation of passive knee flexion with a stressed and stress-free ACL

scientific article published on 01 November 2004

Torsional stability of primary total knee replacement tibial prostheses: a biomechanical study in cadaveric bone

scientific article published on 01 August 1999

Use of a statistical model of the whole femur in a large scale, multi-model study of femoral neck fracture risk

scientific article published on 30 July 2009

Verification of predicted knee replacement kinematics during simulated gait in the Kansas knee simulator

scientific article published on 01 August 2010

Virtual trial to evaluate the robustness of cementless femoral stems to patient and surgical variation

scientific article published on 15 November 2018

Wear in the prosthetic shoulder: association with design parameters

scientific article published in April 2007

Paulina is supported by:

About Paulina

Help