Search filters

List of works by Michael Morlock

A comparative biomechanical analysis of fixation devices for unstable femoral neck fractures: the Intertan versus cannulated screws or a dynamic hip screw

scientific article published on 01 September 2011

A description of spinal fatigue strength.

scientific article published on 11 February 2016

A new algorithm for estimating the rod volume fraction and the trabecular thickness from in vivo computed tomography.

scientific article published on December 2016

A new short uncemented, proximally fixed anatomic femoral implant with a prominent lateral flare: design rationals and study design of an international clinical trial

scientific article

Abrasive water jet cutting as a new procedure for cutting cancellous bone--in vitro testing in comparison with the oscillating saw.

scientific article

Absence of surface roughness changes after insertion of one type of matte cemented femoral component during 2 to 15 years.

scientific article published in June 2003

Acromioclavicular joint dislocations: coracoclavicular reconstruction with and without additional direct acromioclavicular repair

scientific article published on 19 December 2015

Adaptation of mechanical, morphological, and biochemical properties of the rat growth plate to dose-dependent voluntary exercise

scientific article published on 01 October 2004

Advances in Porous Biomaterials for Dental and Orthopaedic Applications.

scientific article published on 28 April 2010

An in vitro comparison of tibial tray cementation using gun pressurization or pulsed lavage

scientific article

Analysis of morphology and gait function after intraarticular calcaneal fracture.

scientific article

Artificial composite bone as a model of human trabecular bone: the implant-bone interface.

scientific article published on 27 June 2006

Assembly force and taper angle difference influence the relative motion at the stem-neck interface of bi-modular hip prostheses.

scientific article published on 10 May 2016

Basic principles and uniform terminology for the head-neck junction in hip replacement

scientific article

Biomechanical Effects of a Dynamic Topping off Instrumentation in a Long Rigid Pedicle Screw Construct.

scientific article published on May 2017

Biomechanical advantage of C1 pedicle screws over C1 lateral mass screws: a cadaveric study.

scientific article published on 31 December 2013

Biomechanical analysis of atlas fractures: a study on 40 human atlas specimens

scientific article published on 01 April 2008

Biomechanical evaluation for mechanisms of periprosthetic femoral fractures

scientific article published on 01 April 2011

Biomechanical evaluation of 3 stabilization methods on acromioclavicular joint dislocations.

scientific article published on 25 April 2013

Biomechanical evaluation of peri- and interprosthetic fractures of the femur

scientific article published on 01 June 2010

Biomechanical modelling of impact-related fracture characteristics and injury patterns of the cervical spine associated with riding accidents

scientific article published on 24 June 2015

Biomechanics of a new short-stemmed uncemented hip prosthesis: An in-vitro study in human bone

scientific article published on 01 January 2006

Biomechanics of short hip endoprostheses--the risk of bone failure increases with decreasing implant size.

scientific article published on 9 June 2010

Bioresorption and degradation of biomaterials

scientific article published on 01 January 2012

Bone-patellar tendon-bone grafts for anterior cruciate ligament reconstruction: an in vitro comparison of mechanical behavior under failure tensile loading and cyclic submaximal tensile loading

scientific article published on 01 July 2002

CAD-CAM plates versus conventional fixation plates for primary mandibular reconstruction: A biomechanical in vitro analysis

scientific article

Cement augmentation of the proximal femoral nail antirotation for the treatment of osteoporotic pertrochanteric fractures--a biomechanical cadaver study.

scientific article

Cement augmentation versus extended dorsal instrumentation in the treatment of osteoporotic vertebral fractures: a biomechanical comparison

scientific article

Cement mantle defects in total hip arthroplasty: influence of stem size and cementing technique.

scientific article published on 14 December 2007

Cementation and interface analysis of early failure cases after hip-resurfacing arthroplasty.

scientific article

Clinical and Wear Analyses of 9 Large Metal-on-Metal Total Hip Prostheses ⬇️

scientific article

Comparison of different cement application techniques for tibial component fixation in TKA

scientific article published on 01 August 2014

Compressive strength of elderly vertebrae is reduced by disc degeneration and additional flexion.

scientific article published on 11 November 2014

Consistent hydration of intervertebral discs during in vitro testing

scientific article published on 13 November 2006

Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers

scientific article published on 25 February 2020

Corroded nitinol wires in explanted aortic endografts: an important mechanism of failure?

scientific article published on 01 June 2001

Corrosion of the Head-Stem Taper Junction-Are We on the Verge of an Epidemic?: Review Article.

scientific article

Deformation characteristics and eigenfrequencies of press-fit acetabular cups ⬇️

scientific article published on January 1, 2011

Deformation of press-fitted metallic resurfacing cups. Part 1: Experimental simulation.

scientific article

Deformation of press-fitted metallic resurfacing cups. Part 2: Finite element simulation.

scientific article

Design parameters and the material coupling are decisive for the micromotion magnitude at the stem-neck interface of bi-modular hip implants.

scientific article published on 12 December 2013

Development of a dynamic model for ventral hernia mesh repair.

scientific article

Does impaction matter in hip resurfacing? A cadaveric study

scientific article published on 31 May 2010

Duration and frequency of every day activities in total hip patients

scientific article published on 01 July 2001

Dynamic intermittent strain can rapidly impair ventral hernia repair

scientific article published on 8 October 2015

EMED Scientific Meeting ESM

scientific article published on 18 April 2008

Effect of cortical thickness and cancellous bone density on the holding strength of internal fixator screws.

scientific article published in November 2004

Effect of tibial tray design on cement morphology in total knee arthroplasty

scientific article

Effects of impaction on cement mantle and trabecular bone in hip resurfacing

scientific article published on 15 July 2010

Effects of insulin therapy on porosity, non-enzymatic glycation and mechanical competence in the bone of rats with type 2 diabetes mellitus.

scientific article published on 3 August 2016

Effects of long-term alendronate treatment on bone mineralisation, resorption parameters and biomechanics of single human vertebral trabeculae.

scientific article published on 22 September 2014

Effects of parathyroid hormone on bone mass, bone strength, and bone regeneration in male rats with type 2 diabetes mellitus

scientific article published on 27 January 2014

Effects of parathyroid hormone on cortical porosity, non-enzymatic glycation and bone tissue mechanics in rats with type 2 diabetes mellitus

scientific article published on 05 May 2015

Endoprostheses in the elderly : Biomaterials, implant selection and fixation technique

scientific article published on 13 December 2016

Erythropoietin loaded microspheres prepared from biodegradable LPLG-PEO-LPLG triblock copolymers: protein stabilization and in-vitro release properties.

scientific article published on December 1998

Estimation of shear load sharing in moderately degenerated human lumbar spine.

scientific article published on 10 January 2013

European multidisciplinary consensus statement on the use and monitoring of metal-on-metal bearings for total hip replacement and hip resurfacing.

scientific article published on 16 March 2013

Extra- vs. intramedullary treatment of pertrochanteric fractures: a biomechanical in vitro study comparing dynamic hip screw and intramedullary nail

scientific article published on 9 June 2015

Factors influencing taper failure of modular revision hip stems

scientific article published on 02 March 2018

Failure of the human lumbar motion-segments resulting from anterior shear fatigue loading.

scientific article published on 30 January 2016

Femoral component loosening after hip resurfacing arthroplasty.

scientific article published on 29 January 2010

Finite element analyses of human vertebral bodies embedded in polymethylmethalcrylate or loaded via the hyperelastic intervertebral disc models provide equivalent predictions of experimental strength

scientific article published on 16 April 2014

Fluid transfer as a mechanism leading to endotension.

scientific article published in August 2010

Frame dislocation of body middle rings in endovascular stent tube grafts

scientific article published on 01 January 1999

Friction-induced whirl vibration: root cause of squeaking in total hip arthroplasty.

scientific article published on 17 November 2011

Head Taper Corrosion Causing Head Bottoming Out and Consecutive Gross Stem Taper Failure in Total Hip Arthroplasty

scientific article published on 24 July 2018

High amplitude direct compressive strain enhances mechanical properties of scaffold-free tissue-engineered cartilage.

scientific article

High cycle fatigue behaviour of functional spinal units

scientific article published on 01 January 2010

High friction moments in large hard-on-hard hip replacement bearings in conditions of poor lubrication

scientific article published on 13 December 2012

Homemaker service to mothers at the time of confinement

scientific article published on 01 May 1950

How to proceed with asymptomatic modular dual taper hip stems in the case of acetabular revision

scientific article published on 02 March 2020

Hybrid Instrumentation in Lumbar Spinal Fusion: A Biomechanical Evaluation of Three Different Instrumentation Techniques

scientific article published on February 2017

Improvements in Vertebral Body Strength Under Teriparatide Treatment Assessed In Vivo by Finite Element Analysis: Results From the EUROFORS Study

article

In vitro characterisation of the biomechanical properties of the subchondral mineralised zone of lumbosacral facet joints.

scientific article published in January 2013

In vivo quantification of the apical fixation forces of different mitral valved stent designs in the beating heart

scientific article published on 29 October 2014

Increase in facet joint loading after nucleotomy in the human lumbar spine

scientific article published on 19 February 2014

Influence of 3D QCT scan protocol on the QCT-based finite element models of human vertebral cancellous bone.

scientific article published on 2 June 2014

Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses

scientific article published on 08 September 2011

Influence of cementing the pin on resistance to fracture in hip resurfacing

scientific article published on 08 October 2010

Influence of interface condition and implant design on bone remodelling and failure risk for the resurfaced femoral head.

scientific article published on 20 April 2011

Influence of material coupling and assembly condition on the magnitude of micromotion at the stem-neck interface of a modular hip endoprosthesis

scientific article published on 30 April 2011

Influence of the compliance of a patient's body on the head taper fixation strength of modular hip implants.

scientific article published on 25 April 2017

Influence of the screw augmentation technique and a diameter increase on pedicle screw fixation in the osteoporotic spine: pullout versus fatigue testing.

scientific article published in August 2014

Influence of time in-situ and implant type on fixation strength of cemented tibial trays - a post mortem retrieval analysis.

scientific article published on 20 July 2012

Influence of trabecular bone quality and implantation direction on press-fit mechanics.

scientific article published on 6 April 2016

Insufficient stability of pedicle screws in osteoporotic vertebrae: biomechanical correlation of bone mineral density and pedicle screw fixation strength.

scientific article published on 8 April 2017

Interfacial conditions between a press-fit acetabular cup and bone during daily activities: implications for achieving bone in-growth

scientific article published on 01 November 2000

Interposition sleeve as treatment option for interprosthetic fractures of the femur: a biomechanical in vitro assessment

scientific article published on 26 April 2015

Intra-articular pressure measurement in the radioulnocarpal joint using a novel sensor: in vitro and in vivo results.

scientific article

Intramuscular pressure in the erector spinae and intra-abdominal pressure related to posture and load

scientific article published on 01 December 1998

Learning metal artifact reduction in cardiac CT images with moving pacemakers

scientific article published on 30 January 2020

Locking plate fixation of humeral head fractures with a telescoping screw. A comparative biomechanical study versus a standard plate

scientific article published on 25 September 2011

Long-term in vivo alterations of polyester vascular grafts in humans

scientific article published on 01 June 1997

Malpositioning of the lag screws by 1- or 2-screw nailing systems for pertrochanteric femoral fractures: a biomechanical comparison of gamma 3 and intertan.

scientific article published in May 2014

Maximizing the fixation strength of modular components by impaction without tissue damage.

scientific article

Mechanical properties of native and tissue-engineered cartilage depend on carrier permeability: a bioreactor study

scientific article published on 19 March 2013

Migration and cyclic motion of a new short-stemmed hip prosthesis--a biomechanical in vitro study.

scientific article published on 27 June 2006

Migration of two different cementless hip arthroplasty stems in combination with two different heads: a biomechanical in vitro study.

scientific article published on 24 March 2006

Mismatched wear couple zirconium oxide and aluminum oxide in total hip arthroplasty

scientific article published on 01 December 2001

Mixing of two co-directional Rayleigh surface waves in a nonlinear elastic material.

scientific article published in January 2015

Modern gait analysis: a tool to improve shoes, insoles and the understanding of foot function

scientific article published on 01 January 1996

Modes of implant failure after hip resurfacing: morphological and wear analysis of 267 retrieval specimens.

scientific article published in August 2008

Morphologic analysis of periprosthetic fractures after hip resurfacing arthroplasty.

scientific article

Morphological and biomechanical analyses of the subchondral mineralized zone in human sacral facet joints: Application to improved diagnosis of osteoarthritis.

scientific article

Necessary precision levels for the subchondral mineralised zone thickness of the facet joint to optimise finite-element model

scientific article published on 01 January 2013

Off-pump mitral valved stent implantation: comparison of apical and subannular fixation techniques.

scientific article published on 29 July 2016

On the relationship between stature and anthropometric measurements of lumbar vertebrae.

scientific article published on 8 June 2015

Orientation of the acetabular component. A comparison of five navigation systems with conventional surgical technique.

scientific article published in October 2006

Periprosthetic tissue metal content but not serum metal content predicts the type of tissue response in failed small-diameter metal-on-metal total hip arthroplasties.

scientific article published in September 2013

Possible role of H1 histone in the differentiation of mouse erythroleukemia cells

scientific article published on 01 May 1990

Primary hip replacement stem taper fracture due to corrosion in 3 patients

scientific article published on 11 January 2016

Primary implant stability after maxillary sinus augmentation with autogenous mesenchymal stem cells: a biomechanical evaluation in rabbits

scholarly article by Björn Riecke et al published 19 April 2011 in Clinical Oral Implants Research

Primary stability of uncemented femoral resurfacing implants for varying interface parameters and material formulations during walking and stair climbing

scientific article published on 12 November 2009

Pseudotumor After Bilateral Ceramic-on-Metal Total Hip Arthroplasty: A Case Report.

scientific article published in March 2014

Pulsed lavage improves fixation strength of cemented tibial components ⬇️

scientific article published on October 16, 2010

Quantification of material loss from the neck piece taper junctions of a bimodular primary hip prosthesis. A retrieval study from 27 failed Rejuvenate bimodular hip arthroplasties.

scientific article

Quantification of the Contact Area at the Head-Stem Taper Interface of Modular Hip Prostheses

scientific article published on 17 August 2015

Realistic loads for testing hip implants.

scientific article published in January 2010

Reasons for failure of hip resurfacing implants. A failure analysis based on 250 revision specimens

scientific article published in July 2008

Relationship between physical, biochemical and biomechanical properties of tissue-engineered cartilage-carrier-constructs.

scientific article published in February 2005

Sensing Cardiac Electrical Activity With a Cardiac Myocyte--Targeted Optogenetic Voltage Indicator

scientific article published on 15 June 2015

Severe Wear and Pseudotumor Formation Due to Taper Mismatch in a Total Hip Arthroplasty: A Case Report.

scientific article published in April 2015

Sex differences in the morphological failure patterns following hip resurfacing arthroplasty

scientific article

Shear strength of the human lumbar spine.

scientific article published on 10 May 2012

Squeak in hip endoprosthesis systems: An experimental study and a numerical technique to analyze design variants

scientific article published on 16 March 2010

Static and dynamic loading measurements of the post-traumatic foot

scientific article published in March 1991

Stem taper mismatch has a critical effect on ceramic head fracture risk in modular hip arthroplasty

scientific article published on 16 December 2016

Stent wire fractures and mesh loosening in explanted endovascular prosthesis

scientific article published on 01 January 2000

Technical strategies to improve tissue engineering of cartilage-carrier-constructs.

scientific article published in January 2009

The 12th "emed Scientific Meeting ESM", Providence (RI), USA, 14 to 17 August 2010

scientific article published on 01 July 2011

The Influence of Cement Morphology Parameters on the Strength of the Cement-Bone Interface in Tibial Tray Fixation.

scientific article published on 24 August 2016

The Influence of Contamination and Cleaning on the Strength of Modular Head Taper Fixation in Total Hip Arthroplasty

scientific article published on 13 May 2017

The condition of the cement mantle in femoral hip prosthesis implantations--a post mortem retrieval study

scientific article published on 01 April 2009

The development of the collagen fibre network in tissue-engineered cartilage constructs in vivo. Engineered cartilage reorganises fibre network

scientific article published on 05 April 2012

The effect of in situ/in vitro three-dimensional quantitative computed tomography image voxel size on the finite element model of human vertebral cancellous bone.

scientific article published in November 2014

The effect of interfacial parameters on cup-bone relative micromotions. A finite element investigation

scientific article published on 01 January 2001

The effect of nucleotomy on facet joint loading - a porcine in vitro study

scientific article published on 09 August 2013

The effect of nucleotomy on facet joint loading in the porcine lumbar spine.

scientific article

The influence of bandage characteristics and inter-individual application variations on underneath bandage pressures

scientific article published on 01 April 1997

The influence of bone damage on press-fit mechanics

scientific article

The influence of component design, bearing clearance and axial load on the squeaking characteristics of ceramic hip articulations

scientific article published on 04 February 2011

The influence of contact conditions and micromotions on the fretting behavior of modular titanium alloy taper connections

scientific article published on 30 August 2012

The influence of friction and interference on the seating of a hemispherical press-fit cup: a finite element investigation

scientific article published on 01 November 1999

The influence of lateral heel flare of running shoes on pronation and impact forces

scientific article published on 01 June 1987

The influence of material and design features on the mechanical properties of transpedicular spinal fixation implants.

scientific article

The influence of resting periods on friction in the artificial hip

scientific article published on 01 February 2003

The influence of stem design on critical squeaking friction with ceramic bearings

scientific article published on 27 June 2013

The influence of stem taper re-use upon the failure load of ceramic heads

scientific article published on 20 April 2015

The relation between titanium taper corrosion and cobalt-chromium bearing wear in large-head metal-on-metal total hip prostheses: a retrieval study

scientific article published in September 2014

The role of inter-prosthetic distance, cortical thickness and bone mineral density in the development of inter-prosthetic fractures of the femur: a biomechanical cadaver study.

scientific article published in October 2014

The role of patient-mode high-resolution peripheral quantitative computed tomography indices in the prediction of failure strength of the elderly women's thoracic vertebral body

scientific article published on 19 August 2014

The taper corrosion pattern observed for one bi-modular stem design is related to geometry-determined taper mechanics ⬇️

scientific article

The taper disaster--how could it happen?

scientific article published on 20 May 2015

The use of water-jetting technology in prostheses revision surgery-first results of parameter studies on bone and bone cement

scientific article published on 01 January 2000

Theoretical considerations and practical results on the influence of the representation of the foot for the estimation of internal forces with models.

scientific article published in February 1991

Time to augment?! Impact of cement augmentation on pedicle screw fixation strength depending on bone mineral density

scientific article published on 09 June 2018

Transapical mitral valved stent implantation: comparison between circular and D-shaped design.

scientific article published in July 2014

Transapical mitral valved stent implantation: computed tomographic evaluation of different prototype designs

scientific article

Transapical mitral valved stent implantation: enhanced survival and decreased paravalvular leakages

scientific article published on 19 June 2014

Transcatheter mitral valve implantation: supra-annular and subvalvular fixation techniques

scientific article published on 01 December 2018

Trunk muscle fatigue and associated EMG changes during a dynamic iso-inertial test.

scientific article published on January 1997

Vibration transfer in the ball-stem contact interface of artificial hips.

scientific article published on 23 May 2013

Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities.

scientific article published on 7 May 2010

Water jet discotomy with microinvasive approach--in vitro testing and initial clinical aspects of a new procedure

scientific article

Wear of a composite ceramic head caused by liner fracture.

scientific article published in July 2014

Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings.

scientific article published on 25 February 2013

What can we learn from explanted endovascular devices?

scientific article published on 01 August 2002

What is the risk of stress risers for interprosthetic fractures of the femur? A biomechanical analysis.

scientific article

["Basketball Foot"--long-time prognosis after peritalar dislocation]

scientific article published on 01 March 2008

[A simplified procedure for mechanical testing of lumbar spinal fixation implants]

scientific article published in October 1999

[Comparison of different vertebral body prosthesis with reference to migration and primary stability in dorsoventral spondylodesis after corporectomy with and without laminectomy]

scientific article published on 01 May 2002

[Comparison of total hip replacements cup orientation and position. Navigation vs. conventional manual implantation of hip prostheses]

scientific article published on 01 November 2005

[Damage to a hip endoprosthesis caused by high-frequency electrocautery]

scientific article published on 01 July 2009

[Definition of pedicle malposition. Primary stability and loosening characteristics of pedicle screws in relation to position: spongious anchoring, cortical anchoring, perforation and malposition]

scientific article published on 01 April 2002

[Effect of various cylinder diameters of implants for lumbar inter-corporeal spinal fusion on compressive strength on the FSU model]

scientific article published on 01 September 1998

[Late complications after alloplastic vascular replacement]

scientific article published on 01 January 2001

[Load shift-total hip replacement--numerical and clinical evaluation of a new concept of adaptive stem fixation]

scientific article

[Mechanical study of potential ceramic implant materials for minimal invasive anterior lumbar interbody fusion]

scientific article published on 01 July 1999

[Periprosthetic and interimplant femoral fractures: Biomechanical analysis]

scientific article published on 01 December 2015

[Placement of pedicle screws using different navigation systems. A laboratory trial with 12 spinal preparations]

scientific article published on 01 April 2002

[Squeaking as a cause for revision of a composite ceramic cup]

scientific article published on 01 September 2011

[The pulsed water jet for selective removal of bone cement during revision arthroplasty]

scientific article published on 01 October 2003

[Use of a water jet for synovectomy: in vitro study of feasibility].

scientific article

[Water jet cutting for bones and bone cement--parameter study of possibilities and limits of a new method]

scientific article published on 01 September 2000

[Which hip articulation bearing for which patient? : Tribology of the future]

scientific article published on 01 December 2011

Paulina is supported by:

About Paulina

Help