A CAD-based on biological method for designing optimal fatigue life

article

A consistent approach to the fracture of pavements

A convenient way to represent fatigue crack growth in structural adhesives

article

A crack opening displacement approach to crack patching

A design study in crack patching

A fibre optic corrosion fuse sensor using stressed metal-coated optical fibres

A finite element analysis of delamination behaviour in a circular laminate

A hybrid formulation for 3D fracture analysis

A methodology for structural optimisation with damage tolerance constraints

A multi-scale approach to crack growth

A new approach to structural optimization

A numerical study of MSD in aluminium alloys

A numerical study of adhesively bonded lap joints

A numerical study of crack monitoring in patched structures using a piezoelectric sensor

A numerical study of two integral type elasto-plastic fracture parameters under cyclic loading

A penalty finite element formulation for the analysis of composite structures

A preliminary study into the matrix dominated non-linear behaviour of graphite/epoxy laminates

A review of composite product data interoperability and product life-cycle management challenges in the composites industry

journal article; published in Advanced Manufacturing in 2017

A scientific evaluation of the approximate 2D theories for composite repairs to cracked metallic components

A simple method based for computing crack shapes

A simple method for calculating the stress intensity factors for complex 3D cracks at a notch

A simple method for computing the stress intensity factors for cracks at notches

A simplified approach to the large amplitude vibration of plates and membranes

article

A stress versus crack growth rate investigation (aka stress – cubed rule)

A study into crack growth in a railway wheel under thermal stop brake loading spectrum

A study into the ability of SPD to restore the buckling strength and modes of rib stiffened panels with simulated stress corrosion cracks

A study into the interaction of intergranular cracking and cracking at a fastener hole

A study of the effect of CPCs on fatigue crack propagation in a representative fuselage lap joint specimen

article

A unified constitutive theory for paper

article

Additively manufactured Ti-6Al-4V replacement parts for military aircraft

Adhesively bonded joints under cyclic loading spectra

An analysis of delamination behaviour

An approach based on biological algorithm for three-dimensional shape optimisation with fracture strength constrains

An approximate expression for the fundamental frequency of vibration of elastic plates

article

An assessment of stress intensity factors for surface flaws in a tubular member

An engineering approach to the fracture assessment of hopper wagons

An experimental description of the response of paper

article

An experimental evaluation of fatigue crack growth

article

An experimental investigation into the effect of impact damage on the compressive strength of step lap joints

article by T.J. Van Blaricum et al published January 1989 in Engineering Fracture Mechanics

An imidazopiperidine series of CCR5 antagonists for the treatment of HIV: the discovery of N-{(1S)-1-(3-fluorophenyl)-3-[(3-endo)-3-(5-isobutyryl-2-methyl-4,5,6,7-tetrahydro-1H-imidazo[4,5-c]pyridin-1-yl)-8-azabicyclo[3.2.1]oct-8-yl]propyl}acetamide

scientific article published on 3 December 2010

An implicit algorithm using explicit correctors for the kinematic hardening model with multiple back stresses

scholarly article by J. P. G. Sawyer et al published 2001 in International Journal for Numerical Methods in Engineering

An in situ oxidation strategy towards overcoming hERG affinity

scientific article published on 21 September 2010

An investigation of the influence of rail chill on crack growth in a railway wheel due to braking loads

Analysis of bonded inserts for the repair of fastener holes

Analysis of bonded repairs to damaged fibre composite structures

Analysis of cold-expansion for cracked and uncracked fastener holes

Analysis of composite laminates and fibre composite repair schemes

Analysis of the Effect of Machining of the Surfaces of WAAM 18Ni 250 Maraging Steel Specimens on Their Durability

scientific article published in 2022

Application of constitutive modelling and advanced repair technology to F111C aircraft

Application of supersonic particle deposition to enhance the structural integrity of aircraft structures

Application of the Hartman–Schijve equation to represent Mode I and Mode II fatigue delamination growth in composites

article

Application of the and S criteria in finite element analysis of impact damage at fastener holes in graphite/epoxy laminates under compression

Application of the extended Kantorovich method to the vibration of clamped rectangular plates

article

Assessment of multiple flat elliptical cracks with interactions

article published in 2002

Assessment of partly circumferential cracks in pipes

Assessment of the effect of impact damage in composites: Some problems and answers

Assessment of the effect of impact damage in composites: Some problems and answers

Australian developments in the analysis of composite structures with material and geometric nonlinearities

Behavior of floating ice sheets

Bonded composite repair of cracked load-bearing holes

Bonded repair of metallic components: Thick sections

Bonded repairs to rib stiffened wing skins

Bonded repairs to surface flaws

Bonded-composite repair of representative multi-site damage in a full-scale fatigue-test article

Calculating crack growth from small discontinuities in 7050-T7451 under combat aircraft spectra

Characterisation of pure and mixed mode fracture in composite laminates

Characteristics of the design surface of damage tolerance parameters and their relation to shape optimisation

Closure effects in delaminated graphite epoxy laminate under compression

Compliance measurements for assessing structural integrity

Composite repairs to bridge steels demystified

Composite repairs to cracked holes under bi-axial loading

Composite repairs to rib stiffened panels

article published in 1999

Compression failures of damaged graphite epoxy laminates

Computational methods in modern repair technology

scholarly article by Rhys Jones et al published 1987 in Computational Mechanics

Computing the Durability of WAAM 18Ni-250 Maraging Steel Specimens with Surface Breaking Porosity

scientific article published in 2023

Computing the growth of naturally-occurring disbonds in adhesively-bonded patches to metallic structures

Continued airworthiness of composite repairs to primary structures for military aircraft

scholarly article by Rhys Jones & W.R. Smith published January 1995 in Composite Structures

Crack Growth from Naturally Occurring Material Discontinuities in Operational Aircraft

Crack Growth in a Range of Additively Manufactured Aerospace Structural Materials

Crack Patching: Analysis and Design

Crack growth and repair of multi-site damage of fuselage lap joints

Crack growth at fastener holes containing intergranular cracking

Crack growth from naturally occurring material discontinuities under constant amplitude and operational loads

Crack growth in a naturally corroded bridge steel

Crack patching revisited

Crack patching: Predicting fatigue crack growth

article

Crack patching: an experimental evaluation of fatigue crack growth

article

Crack size and speed interaction characteristics at micro-, meso- and macro-scale

Cracking in D6ac steel

Cyclic-fatigue crack growth in composite and adhesively-bonded structures: The FAA slow crack growth approach to certification and the problem of similitude

article

Damage tolerance analysis of a helicopter component

article published in 2009

Damage tolerance based design optimisation of a fuel flow vent hole in an aircraft structure

Damage tolerance based shape design of a stringer cutout using evolutionary structural optimisation

Damage tolerance of graphite/epoxy composites

Delamination fatigue growth in polymer-matrix fibre composites: A methodology for determining the design and lifing allowables

article

Delamination growth in polymer-matrix fibre composites and the use of fracture mechanics data for material characterisation and life prediction

Design of an all boron/epoxy doubler reinforcement for the F-111C wing pivot fitting: Structural aspects

article by L. Molent et al published January 1989 in Composite Structures

Design of structures for optimal static strength using ESO

Designing cutouts for optimum residual strength in plane structural elements

Designing for damage tolerant bonded joints

Designing for damage-tolerant composite repairs

Designing for tolerance to impact damage at fastener holes in graphite/epoxy laminates under compression

Determination of anti-symmetric end-loadings from volumetric stress on lateral surface of a rectangular bar

Determination of arbitrary, non-shearing end-loadings from the bulk stress on the lateral surface of a rectangular prism

Determination of symmetric end-loadings from the bulk stress on the lateral surface of a rectangular prism

scholarly article by Ton Tran-Cong et al published 1992 in Computational Mechanics

Determination of the position of a localized heat source within a chirped fibre Bragg grating using a Fourier transform technique

Determination of the stress components of an array of piezoelectric sensors: a numerical study

Development of life extension strategies for Australian military aircraft, using structural health monitoring of composite repairs and joints

Directional dependence of spectra of fiber Bragg gratings due to excess loss

scientific article

Effect of corrosion and fatigue on the remaining life of structures and its implication to additive manufacturing

scholarly article

Effect of debonding on adhesively bonded composite to metal joints in compression

Effects of plasticity on several fracture parameters for impact damage and related problems

article by T.E. Tay et al published January 1991 in Composite Structures

Effects of temperature on the shear stress-strain behaviour of structural adhesives (FM73)

Elastic-plastic finite element analysis of spall formation in gears

Environmental evaluation of repairs to fuselage lap joints

Evaluation of trajectories and contact pressures for the straight nucleus cochlear implant electrode array — a two-dimensional application of finite element analysis

scientific article published on 01 March 2003

Examining the application of the Hartman-Schijve equation to the analysis of cyclic fatigue fracture of polymer-matrix composites

article

Experimental studies into short crack growth

Fatigue based three-dimensional structural design optimisation studies implementing the generalised Frost–Dugdale crack growth law

article

Fatigue crack growth and damage tolerance

article

Fatigue crack growth discrepancies with stress ratio

article

Fatigue crack growth in a diverse range of materials

article

Fatigue crack growth in nano-composites

article

Fatigue life enhancement of structures using shape optimisation

article

Finite Element Analysis of Patched Cracks

scholarly article published January 1979

Finite Element Method Study on the Squats Growth Simulation

Finite element modeling to determine thermal residual strain distribution of bonded composite repairs for structural health monitoring design

article

From NASGRO to fractals: Representing crack growth in metals

Further studies in the application of the method of constant deflection lines to plate bending problems

Health monitoring of composite repairs and joints using optical fibres

article

Health monitoring of draglines using ultrasonic waves

article

Implementation of integration of differences method for extraction of temperature profiles along chirped fibre Bragg gratings

Implications of the lead crack philosophy and the role of short cracks in combat aircraft

In situ health monitoring of bonded composite repairs using a novel fiber Bragg grating sensing arrangement

article

Increasing the fatigue life of cracked fastener holes using bonded repairs

article

Influence of cyclic stress intensity threshold on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

article

Interaction of ultrasonic waves with structural damage: A diffraction analogy

Intragrating strain sensing using a chirped FBG and an integration method

Is fatigue testing of impact damaged laminates necessary?

article

Life cycle analysis of steel railway bridges

Localized strain measurements using an integration method to process intensity reflection spectra from a chirped FBG

article

Lock-in infrared thermography for the evaluation of the structural performance of corrugated paperboard structures

Lock-in thermographic inspection of squats on rail steel head

Low-velocity impacts on preloaded GFRP specimens with various impactor shapes

Mode I, II and Mixed Mode I/II delamination growth in composites

Modelling creep behaviour of orthotropic composites by the coincident element method

Modelling of the lock-in thermography process through finite element method for estimating the rail squat defects

article

Modelling the Variability and the Anisotropic Behaviour of Crack Growth in SLM Ti-6Al-4V

scientific article

Monitoring of crack growth beneath a bonded repair using Bragg gratings

NDI of Rail Squats and Estimating Defect Size and Location Using Lock-In Thermography

article

NDTE using pulse thermography: Numerical modeling of composite subsurface defects

Neutral axis offset effects due to crack patching

New thoughts on stropping cracks which emanate from holes

Numerical analysis of bonded repairs for fastener holes with three-dimensional cracks

Numerical analysis of subsurface crack failure beneath the pitch line of a gear tooth during engagement

Observations on fatigue crack growth in a range of materials

article

On the Growth of Fatigue Cracks from Material and Manufacturing Discontinuities Under Variable Amplitude Loading

article

On the USAF ‘risk of failure’ approach and its applicability to composite repairs to metal airframes

On the Vlasov and Kerr foundation models

On the analysis of bonded step lap joints

article by Rhys Jones et al published October 2018 in Theoretical and Applied Fracture Mechanics

On the analysis of composite structures with material and geometric non-linearities

On the analysis of cracking under a combined quadratic thermal flux and a quadratic mechanical loading

On the determination of stress components in 3-d from thermoelastic data

article published in 1990

On the mechanical behaviour of aging and recycled paper structures under cyclic humidity

article

On the potential of supersonic particle deposition to repair simulated corrosion damage

On the three dimensional analysis of thick laminated plates

On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures

Optical fibre sensors for health monitoring of bonded repair systems

article

Optimal topology design of industrial structures using an evolutionary algorithm

Optimisation of damage tolerant structures using a 3D biological algorithm

article published in 2006

Piezomagnetic and piezoelectric poling effects on mode I and II crack initiation behavior of magnetoelectroelastic materials

Potential failure mechanisms of bonded composite repairs for metal and concrete

Predicting the fatigue life and crack aspect ratio evolution in complex structures

article

Rail wheel removal and its implication on track life: A fracture mechanics approach

Reducing the effects of rivet holes on fatigue life by adhesive bonding

article

Repair of impact damaged composites

Repair of mirage III aircraft using the BFRP crack-patching technique

Repairs using fibre reinforced plastics

Repairs using fibre reinforced plastics

Requirements and Variability Affecting the Durability of Bonded Joints

scientific article published on 23 March 2020

Residual Strength Optimisation of a Vent Hole in an Aircraft Component Using a Heuristic Method

Residual strength of composites with multiple impact damage

Residual strength of impact damaged composites

Residual strength of impact-damaged composites

Review of Requirements for the Durability and Damage Tolerance Certification of Additively Manufactured Aircraft Structural Parts and AM Repairs

scientific article published on 15 March 2020

Similitude: Fatigue cracking in steels

article

Strain-independent temperature measurements using a standard and a Chirped fibre Bragg Grating

Stress intensity factor solutions for finite body with quarter-elliptical flaws emanating from a notch

Structural optimisation of 3D damage tolerant components comparing the biological and genetic algorithm solutions

Structural optimisation with damage tolerance constraints

Structural optimisation with fracture strength constraints

Studies in the matrix dominated failures of composite joints

Study of multi-site damage of fuselage lap joints

Supersonic particle deposition as a means for enhancing the structural integrity of aircraft structures

The USAF characteristic K approach for cracks growing from small material discontinuities under combat aircraft and civil aircraft load spectra

The Vlasov foundation model

article

The analysis of stress intensity factors in two interacting collinear asymmetric cracks in a finite plate

The development of combination mechanical contact and thermal braking loads for railway wheel fatigue analysis

article

The effect of impactor shape on the impact response of composite laminates

The effect of size on the quantitative estimation of defect depth in steel structures using lock-in thermography

The generalised Frost–Dugdale approach to modelling fatigue crack growth

article

The influence of cyclic stress intensity threshold on fatigue life scatter

article

The response of composite structures with pre-stress subject to low velocity impact damage

article by B. Whittingham et al published October 2004 in Composite Structures

The role of energy related parameters in life enhancement procedures

The tool for assessing the damage tolerance of railway wheel under service conditions

Thermal Considerations in the Patching of Metal Sheets with Composite Overlays

Thermoelastic assessment of damage growth in composites

Thermoelastic constant or thermoelastic parameter?

Thermography as a tool for damage assessment

Thermomechanical analysis of composite specimens

Thermomechanical assessment of damage in composites

Thermomechanical behaviour of composites

scholarly article by Rhys Jones et al published 1989 in Computational Mechanics

Thoughts on the scatter seen in cyclic Mode I fatigue delamination growth in DCB tests

article

Three-dimensional fatigue-based structural design optimisation of fuel flow vent holes

article

Three-dimensional structural design optimisation based on fatigue implementing a genetic algorithm and a non-similitude crack growth law

article

Three-dimensional structure optimal design for extending fatigue life by using biological algorithm

article

Tools and methods for addressing the durability of rolling stock

Tools for Assessing the Damage Tolerance of Primary Structural Components

Topology optimisation of a bulkhead component used in aircrafts using an evolutionary algorithm

Transverse vibrations of shallow shells by the method of constant‐deflection contours

article

Understanding crack growth in fuselage lap joints

Understanding delamination behaviour in a circular laminate

Unified constitutive model for thermoset adhesive, FM73

article

Using hybrid element method to solve 3D elliptic crack problems with multi-materials structure

Vibration and buckling of plates at elevated temperatures

article

Weight functions for composite repairs to stiffened panels

Weight functions, CTOD, and related solutions for cracks at notches