Search filters

List of works by Frederick A. Rueggeberg

A comparison of monomer conversion and inorganic filler content in visible light-cured denture resins

scientific article published on 01 July 1992

Accuracy and precision of as-received implant torque wrenches.

scientific article published on 17 July 2014

Accuracy of Irradiance and Power of Light-Curing Units Measured With Handheld or Laboratory Grade Radiometers

scientific article published on 22 July 2019

Alterations in cell lipid metabolism by glycol methacrylate (HEMA)

scientific article published on 01 January 1999

An ORMOSIL-Containing Orthodontic Acrylic Resin with Concomitant Improvements in Antimicrobial and Fracture Toughness Properties ⬇️

scientific article published on January 1, 2012

Analysis of temperature increase in swine gingiva after exposure to a Polywave(®) LED light curing unit.

scientific article

Assessing the effect of extraneous light on photoactivated resin composites

scientific article published in August 1998

Biomechanical changes from long-term freezer storage and cellular reduction of tracheal scaffoldings.

scientific article published on 5 August 2014

Calcium phosphate phase transformation produced by the interaction of the portland cement component of white mineral trioxide aggregate with a phosphate-containing fluid

scientific article published on 23 August 2007

Calibration of FTIR conversion analysis of contemporary dental resin composites

scientific article published on 01 October 1990

Changes in pediatric tracheostomy tubes exposed to home dishwashing

scientific article published on 20 June 2017

Changes in resin-infiltrated dentin stiffness after water storage.

scientific article

Characterization of Inorganic Filler Content, Mechanical Properties, and Light Transmission of Bulk-fill Resin Composites

scientific article published on 12 April 2017

Comparison of in vivo and in vitro models to evaluate pulp temperature rise during exposure to a Polywave® LED light curing unit

scientific article published on 01 May 2019

Comparison of manufacturer-recommended exposure durations with those determined using biaxial flexure strength and scraped composite thickness among a variety of light-curing units

scientific article published in January 2009

Comparison of seal after obturation techniques using a polydimethylsiloxane-based root canal sealer

scientific article published on 13 October 2006

Controlling In Vivo, Human Pulp Temperature Rise Caused by LED Curing Light Exposure

scientific article published on 16 November 2018

Correlation between the beam profile from a curing light and the microhardness of four resins.

scientific article

Correlation of cytotoxicity, filler loading and curing time of dental composites

scientific article published on 01 October 1991

Correlation of parameters used to estimate monomer conversion in a light-cured composite

scientific article published on 01 June 1988

Cure times for contemporary composites.

scientific article published in February 2013

Curing potential of dual-polymerizable resin cements in simulated clinical situations

scientific article published on 01 May 2001

Defining the biomechanical properties of the rabbit trachea

scientific article published on 10 June 2014

Degree of conversion and mechanical properties of a BisGMA:TEGDMA composite as a function of the applied radiant exposure

scientific article published on 01 February 2008

Determination of resin cure using infrared analysis without an internal standard

scientific article published on 01 July 1994

Dynamic mechanical analysis of two crosslinked copolymer systems

scientific article published on 01 September 1994

Effect of Ceramic Interposition and Post-activation Times on Knoop Hardness of Different Shades of Resin Cement.

scientific article published in January 2018

Effect of Composite Polymerization Stress and Placement Technique on Dentin Micropermeability of Class I Restorations

scientific article published on 01 January 2018

Effect of Curing Light Barriers and Light Types on Radiant Exposure and Composite Conversion

scientific article published on 14 July 2015

Effect of Light-Enhanced Bleaching on In Vitro Surface and Intrapulpal Temperature Rise ⬇️

scientific article published on January 1, 2001

Effect of Short-Duration, Localized Carbamide Peroxide Application to Remove Enamel Staining on Bond Strength of Resin Cement to Enamel

scientific article published on 3 March 2016

Effect of Sonic Resin Composite Delivery on Void Formation Assessed by Micro-computed Tomography.

scientific article published on 2 February 2018

Effect of Temperature on the Degree of Conversion and Working Time of Dual-Cured Resin Cements Exposed to Different Curing Conditions ⬇️

scientific article published on July 1, 2012

Effect of adhesive hydrophilicity and curing time on the permeability of resins bonded to water vs. ethanol-saturated acid-etched dentin

scientific article published on 20 June 2008

Effect of blue and violet light on polymerization shrinkage vectors of a CQ/TPO-containing composite.

scientific article

Effect of bulk/incremental fill on internal gap formation of bulk-fill composites

scientific article published on 27 January 2014

Effect of curing mode on microtensile bond strength to dentin of two dual-cured adhesive systems in combination with resin luting cements for indirect restorations.

scientific article published in January 2007

Effect of curing mode on the polymerization characteristics of dual-cured resin cement systems

scientific article published on 18 April 2008

Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations

scientific article published on 01 April 2000

Effect of indirect restorative material and thickness on light transmission at different wavelengths

scientific article published on 28 December 2018

Effect of metal type and surface treatment on in vitro tensile strength of copings cemented to minimally retentive preparations

scientific article published in September 2007

Effect of mold type, diameter, and uncured composite removal method on depth of cure

scientific article published on 3 December 2015

Effect of peroxide bleaching on the biaxial flexural strength and modulus of bovine dentin

scientific article

Effect of post-cure temperature and heat duration on monomer conversion of photo-activated dental resin composite

scientific article published in July 1997

Effect of resin hydrophilicity and temperature on water sorption of dental adhesive resins

scientific article published on 13 October 2005

Effect of resin hydrophilicity on water-vapour permeability of dental adhesive films

scientific article published on 01 October 2005

Effect of restoration composition, shade, and thickness on the cure of a photoactivated resin cement

scientific article

Effect of sodium sulfinate salts on the polymerization characteristics of dual-cured resin cement systems exposed to attenuated light-activation.

scientific article published on 7 January 2009

Effect of solvent type and content on monomer conversion of a model resin system as a thin film

scientific article published on 21 March 2007

Effect of temperature on composite polymerization stress and degree of conversion.

scientific article

Effect of temperature on unpolymerized composite resin film thickness

scientific article published on 01 December 2006

Effect of tooth brushing on gloss retention and surface roughness of five bulk-fill resin composites.

scientific article published on 5 December 2017

Effect of using proper light-curing techniques on energy delivered to a Class 1 restoration

scientific article published on 01 July 2014

Effect of water-aging on the antimicrobial activities of an ORMOSIL-containing orthodontic acrylic resin

scientific article published on 26 February 2013

Effects of HEMA on water evaporation from water-HEMA mixtures

scientific article published on 01 January 1998

Effects of acrylic resin monomers on porcine coronary artery reactivity

scientific article published on 2 May 2016

Effects of chlorine-based and quaternary ammonium-based disinfectants on the wettability of a polyvinyl siloxane impression material

scientific article

Effects of extending duration of exposure to curing light and different measurement methods on depth-of-cure analyses of conventional and bulk-fill composites

scientific article published on 05 June 2020

Effects of quaternary ammonium-methacrylates on the mechanical properties of unfilled resins

scientific article published on 4 September 2014

Effects of residual ethanol on the rate and degree of conversion of five experimental resins

scientific article published on 25 December 2008

Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity.

scientific article published in November 2005

Effects of subtoxic concentrations of benzoyl peroxide on cell lipid metabolism.

scientific article

Effects on microstrain and conversion of flowable resin composite using different curing modes and units.

scientific article published in May 2007

Efficacy of composite surface sealers in sealing cavosurface marginal gaps

scientific article published on 19 September 2005

Emission Characteristics and Effect of Battery Drain in "Budget" Curing Lights.

scientific article published on 11 December 2015

Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet Laser Effectively Ablates Single-Species Biofilms on Titanium Disks Without Detectable Surface Damage.

scientific article

Erratum to: Effect of mold type, diameter, and uncured composite removal method on depth of cure

scientific article published on 01 November 2016

Evaluation of the effect of water-uptake on the impedance of dental resins

scientific article published on 28 February 2006

Examination of the implant-abutment interface after fatigue testing

scientific article published on 01 March 2001

Exposure times for contemporary composites

scientific article published on 19 March 2013

From vulcanite to vinyl, a history of resins in restorative dentistry.

scientific article

Further investigation into the risk of skin cancer associated with the use of UV nail lamps

scientific article published on 01 July 2014

Hardness comparison of bulk-filled/transtooth and incremental-filled/occlusally irradiated composite resins

scientific article published in August 2007

Heat generation during removal of an abutment screw fragment from dental implants.

scientific article published on 26 September 2017

Impact of dental devices on cochlear implants

scientific article published in January 2002

In Vivo Measurement of Root Canal Wall Temperature at Different Stages Prior to Fiber Post Cementation

scientific article published on 01 February 2019

In vitro hardness, water sorption, and resin solubility of laboratory-processed and autopolymerized long-term resilient denture liners over one year of water storage

scientific article published on 01 August 2002

In vivo temperature measurement: tooth preparation and restoration with preheated resin composite

scientific article published on 01 October 2010

In vivo temperature rise in anesthetized human pulp during exposure to a polywave LED light curing unit.

scientific article

Infiltration/evaporation-induced shrinkage of demineralized dentin by solvated model adhesives

scientific article published on 01 January 2007

Influence of Class V preparation on in vivo temperature rise in anesthetized human pulp during exposure to a Polywave® LED light curing unit

scientific article published on 29 March 2018

Influence of filler addition, storage medium and evaluation time on biaxial flexure strength and modulus of adhesive systems

scientific article published on 12 December 2011

Influence of irradiant energy on degree of conversion, polymerization rate and shrinkage stress in an experimental resin composite system

scientific article

In Vitro biocompatibility evaluation of a root canal filling material that expands on water sorption.

scientific article

In vitro mechanical analysis of complete-arch mandibular implant-supported fixed prostheses abutment screws after cyclic loading

scientific article published on 11 February 2015

Irradiance differences in the violet (405 nm) and blue (460 nm) spectral ranges among dental light-curing units.

scientific article

Irradiance uniformity and distribution from dental light curing units

scientific article published on 01 April 2010

Isothermal anneal effect on microcrack density around leucite particles in dental porcelain

scientific article published on 01 June 1994

Light curing in dentistry and clinical implications: a literature review.

scientific article

Localised irradiance distribution found in dental light curing units

scientific article published on 25 November 2013

Marginal discrepancy dimensions of single unit metal crowns fabricated by using CAD-CAM-milled acrylate resin polymer blocks or a conventional waxing technique

scientific article published on 14 October 2017

Mechanical Modeling of the Human Cricoid Cartilage Using Computer-Aided Design: Applications in Airway Balloon Dilation Research

scientific article published on 9 August 2015

Mechanical properties of endodontic broaches and effects of bead sterilization

scientific article published on 01 March 1988

Metrologic evaluation of the surface of white MTA after the use of two endodontic irrigants

scientific article published on 20 February 2007

Micromorphology of resin-dentin interfaces using one-bottle etch&rinse and self-etching adhesive systems on laser-treated dentin surfaces: a confocal laser scanning microscope analysis.

scientific article

Microtensile bond strength of dual-polymerizing cementing systems to dentin using different polymerizing modes

scientific article published on 01 February 2007

Minimizing patients' exposure to uncured components in a dental sealant

scientific article published on 01 December 1999

Monomer conversion and cytotoxicity of dental composites irradiated with different modes of photoactivated curing

scientific article published on 01 October 2007

Monomer conversion of pre-heated composite

scientific article published on 01 July 2005

Monomer conversion, microhardness, internal marginal adaptation, and shrinkage stress of bulk-fill resin composites

scientific article published on 19 November 2015

Net expansion of dried demineralized dentin matrix produced by monomer/alcohol saturation and solvent evaporation

scientific article published on 01 November 2006

Novel Coating of Surgical Suture Confers Antimicrobial Activity Against Porphyromonas gingivalis and Enterococcus faecalis

scientific article published on 23 February 2015

Polymerization kinetics of pre-heated composite.

scientific article published on January 2006

Power distribution across the face of different light guides and its effect on composite surface microhardness

scientific article

Proportioning effect on physical and chemical properties of polysulfide impression material

scientific article published on 01 October 1994

Quaternary ammonium silane-functionalized, methacrylate resin composition with antimicrobial activities and self-repair potential.

scientific article published on 29 May 2012

Resin cure determination by polymerization shrinkage

scientific article published on 01 July 1995

Responses of oral epithelial cells to dental resin components

scientific article published on 01 January 1996

Retention strength of impression materials to a tray material using different adhesive methods: an in vitro study

scientific article published on 01 December 2008

Shear bond strength of zirconia-based ceramics veneered with 2 different techniques.

scientific article published on 17 February 2017

Short- and Long-Term Bond Strength Between Resin Cement and Glass-Ceramic Using a Silane-Containing Universal Adhesive

scientific article published on 12 June 2017

Silorane- and high filled-based "low-shrinkage" resin composites: shrinkage, flexural strength and modulus

scientific article published on 01 March 2013

Sodium hypochlorite disinfection of irreversible hydrocolloid impression material

scientific article published on May 1, 1992

Staining potential differences between an infiltrative resin and an esthetic, flowable composite

article

State-of-the-art: dental photocuring--a review.

scientific article

Tensile bond strength of an adhesive resin cement to different alloys having various surface treatments

scientific article published on 01 February 2009

The disintegration of superEBA cement in solutions with adjusted pH and osmolarity

scientific article published on 01 November 1997

The effect of autoclaving on energy transmission through light-curing tips

scientific article published on 01 August 1996

The effect of chlorine-based disinfectant on wettability of a vinyl polysiloxane impression material

scientific article published on 01 November 2010

The effect of photopolymerization on the degree of conversion, polymerization kinetic, biaxial flexure strength, and modulus of self-adhesive resin cements.

scientific article published on 26 November 2014

Thermal debracketing of orthodontic resins

scientific article published on 01 July 1990

Thermal properties of a methyl methacrylate-based orthodontic bonding adhesive

scientific article published on 01 April 1992

Transmission of violet and blue light through conventional (layered) and bulk cured resin-based composites.

scientific article

Tubular occlusion prevents water-treeing and through-and-through fluid movement in a single-bottle, one-step self-etch adhesive model

scientific article published on 01 October 2005

Ultraconservative and cariostatic sealed restorations: results at year 10

scientific article published on 01 January 1998

Use of fluorescent compounds in assessing bonded resin-based restorations: a literature review.

scientific article

Vasorelaxant effect of resin-based, single-bottle dentin bonding systems

scientific article published on 01 March 2005

Viscoelastic properties of demineralized dentin matrix

scientific article

Paulina is supported by:

About Paulina

Help