Search filters

List of works by Dominique P. Pioletti

3D strain map of axially loaded mouse tibia: a numerical analysis validated by experimental measurements.

scientific article published in February 2009

A Flow Sensing Model for Mesenchymal Stromal Cells Using Morphogen Dynamics

scientific article published on May 21, 2013

A model for micromotion-induced fluid flow at the bone-implant interface

scientific article published in January 2014

A musculoskeletal shoulder model based on pseudo-inverse and null-space optimization

scientific article published on 14 August 2010

A new technique to measure micromotion distribution around a cementless femoral stem

scientific article published on 08 October 2010

A patient-specific model of total knee arthroplasty to estimate patellar strain: A case study.

scientific article published on 2 December 2015

A photopolymerized composite hydrogel and surgical implanting tool for a nucleus pulposus replacement

scientific article published on 21 February 2016

Activities of daily living with reverse prostheses: importance of scapular compensation for functional mobility of the shoulder

scientific article published on January 11, 2013

Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages.

scientific article published on 25 February 2016

Architecture and properties of anisotropic polymer composite scaffolds for bone tissue engineering

scientific article published on 27 July 2005

Augmentation of bone defect healing using a new biocomposite scaffold: an in vivo study in sheep

scientific article published on 24 March 2010

Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells

scientific article published in November 2005

Biodegradable HEMA-based hydrogels with enhanced mechanical properties

scientific article

Biomechanical consequences of humeral component malpositioning after anatomical total shoulder arthroplasty

scientific article published on 16 October 2010

Biomechanical evaluation of intra-articular and extra-articular procedures in anterior cruciate ligament reconstruction: a finite element analysis

scientific article published on 30 November 2006

Bioresorbable composites prepared by supercritical fluid foaming

scientific article published in October 2005

Bone regeneration and stem cells

scientific article (publication date: April 2011)

Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration.

scientific article published on 23 November 2004

Combined effects of zoledronate and mechanical stimulation on bone adaptation in an axially loaded mouse tibia

scientific article published on September 24, 2010

Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces

scientific article published on 04 April 2014

Comparison of polyethylene wear in anatomical and reversed shoulder prostheses.

scientific article

Composite Double-Network Hydrogels To Improve Adhesion on Biological Surfaces

scientific article published on 30 October 2018

Control of Dissipation Sources: A Central Aspect for Enhancing the Mechanical and Mechanobiological Performances of Hydrogels

scientific article published on 16 October 2019

Controlled release from a mechanically-stimulated thermosensitive self-heating composite hydrogel

scientific article published on 07 October 2013

Corrigendum: Anti-Microbial Dendrimers against Multidrug-Resistant P. aeruginosa Enhance the Angiogenic Effect of Biological Burn-wound Bandages

scientific article published on 7 April 2016

Damping properties of the nucleus pulposus

scientific article published on 26 June 2012

Distribution of gap and micromotion during compressive loading around a cementless femoral stem

scientific article published on 03 August 2015

Does locally delivered Zoledronate influence peri-implant bone formation? - Spatio-temporal monitoring of bone remodeling in vivo

scientific article published on 18 September 2014

Effect of a pathological scapular tilt after total shoulder arthroplasty.

scientific article published in March 2012

Effect of different Ti-6Al-4V surface treatments on osteoblasts behaviour

scientific article published on 01 March 2002

Effect of micromechanical stimulations on osteoblasts: development of a device simulating the mechanical situation at the bone-implant interface

scientific article published on 01 January 2003

Effect of partial-thickness tear on loading capacities of the supraspinatus tendon: a finite element analysis.

scientific article published on 20 August 2015

Effect of temporal onsets of mechanical loading on bone formation inside a tissue engineering scaffold combined with cell therapy.

scientific article published on 26 April 2018

Efficient decellularization of equine tendon with preserved biomechanical properties and cytocompatibility for human tendon surgery indications

scientific article published on 14 November 2019

Experimental and mathematical methods for representing relative surface elongation of the ACL.

scientific article published in September 1995

Fetal bone cells for tissue engineering

scientific article published in December 2004

Gene expression analysis of osteoblastic cells contacted by orthopedic implant particles.

scientific article published in September 2002

How plate positioning impacts the biomechanics of the open wedge tibial osteotomy; a finite element analysis

scientific article published in October 2005

Human fetal bone cells associated with ceramic reinforced PLA scaffolds for tissue engineering

scientific article published on 7 November 2007

Human fetal bone cells in delivery systems for bone engineering

scientific article published on 10 January 2011

Human muscular fetal cells: a potential cell source for muscular therapies

scientific article published in January 2008

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

scientific article published on 02 April 2020

Impact of partial-thickness tears on supraspinatus tendon strain based on a finite element analysis

scientific article published on 01 January 2014

Impact of synovial fluid flow on temperature regulation in knee cartilage

scientific article published on 25 November 2014

Importance of polyethylene thickness in total shoulder arthroplasty: a finite element analysis

scientific article published on 04 January 2012

Importance of the subscapularis muscle after total shoulder arthroplasty

scientific article published on January 18, 2013

Improving hydrogels' toughness by increasing the dissipative properties of their network

scientific article published on 22 October 2014

In vitro and in vivo investigation of bisphosphonate-loaded hydroxyapatite particles for peri-implant bone augmentation

scientific article published on 9 November 2015

In vitro characterization of immune-related properties of human fetal bone cells for potential tissue engineering applications

scientific article published in July 2009

In vivo assessment of local effects after application of bone screws delivering bisphosphonates into a compromised cancellous bone site

scientific article published on 21 June 2011

In vivo loading increases mechanical properties of scaffold by affecting bone formation and bone resorption rates

scientific article published on 18 September 2011

Injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies

scientific article published on 02 March 2012

Integration of mechanotransduction concepts in bone tissue engineering.

scientific article published on 26 March 2013

Intrinsic viscoelasticity increases temperature in knee cartilage under physiological loading.

scientific article published on 15 November 2013

Isolation and in vitro chondrogenic potential of human foetal spine cells

scientific article published on 24 December 2008

Large-scale gene expression analysis of osteoblasts cultured on three different Ti-6Al-4V surface treatments

scientific article published on 01 November 2002

Light-Activated, Bioadhesive, Poly(2-hydroxyethyl methacrylate) Brush Coatings

scientific article published on 23 October 2019

Local delivery of bisphosphonate from coated orthopedic implants increases implants mechanical stability in osteoporotic rats.

scientific article published in January 2006

Mechanical evaluation of a tissue-engineered zone of calcification in a bone–hydrogel osteochondral construct

scientific article published on May 24, 2013

Mechanical interaction between cells and fluid for bone tissue engineering scaffold: modulation of the interfacial shear stress

scientific article published on 09 December 2009

Microstimulation at the bone-implant interface upregulates osteoclast activation pathways

scientific article published on 05 October 2007

Miniature probe for the delivery and monitoring of a photopolymerizable material

scientific article published in December 2015

Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus

scientific article published on May 27, 2011

Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone

scientific article published on 23 September 2018

Novel micropatterns mechanically control fibrotic reactions at the surface of silicone implants

scientific article published on 2 April 2015

On the independence of time and strain effects in the stress relaxation of ligaments and tendons

scientific article published on 01 December 2000

Patellar bone strain after total knee arthroplasty is correlated with bone mineral density and body mass index

scientific article published on 09 April 2019

Peri-implant bone remodeling after total hip replacement combined with systemic alendronate treatment: a finite element analysis.

scientific article

Photopolymerizable hydrogels for implants: Monte-Carlo modeling and experimental in vitro validation

scientific article

Plasticity of fetal cartilaginous cells

scientific article published on 04 May 2010

Polylactic acid-phosphate glass composite foams as scaffolds for bone tissue engineering

scientific article published in February 2007

Prediction of spatio-temporal bone formation in scaffold by diffusion equation

scientific article published on 23 June 2011

Repair of critical size defects in the rat cranium using ceramic-reinforced PLA scaffolds obtained by supercritical gas foaming

scientific article

Response to Letter to the Editor: Comment on “injectable calcium phosphate cement for augmentation around cancellous bone screws. In vivo biomechanical studies” (volume 45, issue 7, pages 1156–1160)

scientific article published on 02 November 2012

Simultaneous and multisite measure of micromotion, subsidence and gap to evaluate femoral stem stability

scientific article published on 20 February 2012

Strain rate effect on the mechanical behavior of the anterior cruciate ligament-bone complex

scientific article published on 01 March 1999

Strategies for improving the repair of focal cartilage defects.

scientific article published on 07 September 2015

Surgical preparation of bone-scaffold interface is critical for bone regeneration inside tissue engineering scaffold

scientific article published on 19 November 2010

Targeted mechanical properties for optimal fluid motion inside artificial bone substitutes

scientific article published on 01 August 2009

The influence of wear particles in the expression of osteoclastogenesis factors by osteoblasts

scientific article published in December 2004

The role of energy dissipation of polymeric scaffolds in the mechanobiological modulation of chondrogenic expression.

scientific article published on 9 December 2013

Tightening force and torque of nonlocking screws in a reverse shoulder prosthesis

scientific article published on 24 April 2010

Time course of bone screw fixation following a local delivery of Zoledronate in a rat femoral model - a micro-finite element analysis

scientific article published on 19 January 2015

Total shoulder arthroplasty: downward inclination of the glenoid component to balance supraspinatus deficiency

scientific article published on 24 February 2009

Translation of biomechanical concepts in bone tissue engineering: from animal study to revision knee arthroplasty

scientific article published on 17 September 2012

Variability of the pullout strength of cancellous bone screws with cement augmentation

scientific article published on 7 March 2015

Viscoelastic constitutive law in large deformations: application to human knee ligaments and tendons

scientific article published in August 1998

Whole-cell bioprocessing of human fetal cells for tissue engineering of skin

scientific article published on 4 February 2009

Wound-healing gene family expression differences between fetal and foreskin cells used for bioengineered skin substitutes.

scientific article

Zone-dependent mechanical properties of human articular cartilage obtained by indentation measurements

scientific article published on 04 May 2018