Search filters

List of works by Alan Needleman

3D analyses of the effect of weld orientation in Charpy specimens

scientific article published in October 2004

3D analysis of failure modes in the Charpy impact test

scientific article (publication date: May 1994)

A Continuum Model for Void Nucleation by Inclusion Debonding

scientific article published in September 1987

A cohesive segments method for the simulation of crack growth

scientific article published in May 2003

A discrete dislocation plasticity analysis of grain-size strengthening

scientific article published in July 2005

A finite strain, finite band method for modeling ductile fracture

A finite thickness band method for ductile fracture analysis

A microstructurally motivated description of the deformation of vertically aligned carbon nanotube structures

scientific article published on 19 March 2012

A numerical study of localized deformation in bi-crystals

scientific article published in December 1985

A tangent modulus method for rate dependent solids

scientific article published in January 1984

An Evaluation of the Accuracy of Discontinuous Finite Elements in Explicit Dynamic Calculations

scientific article published in 2007

An analysis of dislocation nucleation near a free surface

scientific article published in March 2007

An analysis of ductile rupture modes at a crack tip

scientific article published in January 1987

An analysis of myocardial infarction. The effect of regional changes in contractility

scientific article published on 01 December 1984

An analysis of thickness effects in the Izod test

scientific article published in July 2008

An experimental and numerical study of deformation in metal-ceramic composites

scientific article published in November 1989

Analysis of uniaxial compression of vertically aligned carbon nanotubes

scientific article published in October 2011

Boundary damage effects on the evolution of creep strain

scientific article published on 8 September 2008

Bulge formation and necking in a polymer tube under dynamic expansion

scientific article published in October 2008

Characterization of plastically compressible solids via spherical indentation

scientific article published in March 2021

Contact area and size effects in discrete dislocation modeling of wedge indentation

scientific article published in March 2007

Convergent beam electron diffraction measurements of relaxation in strained silicon using higher order Laue zone line splitting

scientific article published on 15 March 2009

Creep crack growth by grain boundary cavitation under monotonic and cyclic loading

scientific article published in November 2017

Deformation of plastically compressible hardening-softening-hardening solids

scientific article published in August 2012

Discrete dislocation analysis of size effects in thin films

scientific article published on 15 May 2003

Discrete dislocation analysis of the wedge indentation of polycrystals

scientific article published in November 2007

Discrete dislocation modelling of submicron indentation

scientific article published in July 2005

Discrete dislocation plasticity analysis of single slip tension

scientific article published in July 2005

Discrete dislocation plasticity analysis of static friction

scientific article published in June 2004

Discrete dislocation plasticity analysis of the grain size dependence of the flow strength of polycrystals

scientific article published in December 2008

Discrete dislocation plasticity analysis of the wedge indentation of films

scientific article published in November 2006

Discrete dislocation plasticity modeling of short cracks in single crystals

scientific article published in January 2003

Discrete dislocation plasticity: a simple planar model

scientific article published in September 1995

Discrete dislocation simulations of compression of tapered micropillars

Discrete shear transformation zone plasticity

Discrete shear-transformation-zone plasticity modeling of notched bars

scientific article published in February 2018

Discretevs smeared crack models for concrete fracture: bridging the gap

scientific article published in June 2004

Dynamic mode II crack growth along an interface between an elastic solid and a plastic solid

scientific article published in November 2018

Dynamic neck development in a polymer tube under internal pressure loading

scientific article published in January 2008

Effect of Material Parameters in the Izod Test for Polymers

Effect of Properties and Turgor Pressure on the Indentation Response of Plant Cells

scientific article published on 30 March 2018

Effect of an interphase region on debonding of a CNT reinforced polymer composite

scientific article published in December 2010

Effect of inclusion density on ductile fracture toughness and roughness

scientific article published in February 2014

Effect of specimen thickness on the creep response of a Ni-based single-crystal superalloy

scientific article published in September 2012

Effect of the number and orientation of active slip systems on plane strain single crystal indentation

scientific article published on 7 August 2006

Effect of viscoplastic material parameters on polymer indentation

scientific article published on 9 July 2012

Energy dissipation rate and kinetic relations for Eshelby transformations

scientific article published in March 2020

Engineering the crack path by controlling the microstructure

scientific article published in March 2017

Environmentally enhanced creep crack growth by grain boundary cavitation under cyclic loading

article published in 2018

Erratum to “Analysis of uniaxial compression of vertically aligned carbon nanotubes” [Journal of the Mechanics and Physics of Solids 59 (2011) 2227–2237]

scientific article published in October 2012

Erratum: “A microstructurally motivated description of the deformation of vertically aligned carbon nanotube structures” [Appl. Phys. Lett. 100, 121910 (2012)]

scientific article published on 26 November 2012

Fatigue crack growth from a cracked elastic particle into a ductile matrix

scientific article published on 21 October 2008

Finite deformation analysis of crack tip fields in plastically compressible hardening–softening–hardening solids

scientific article published on 8 November 2016

Finite strain discrete dislocation plasticity

scientific article published in November 2003

Grain boundary crack growth in metastable titanium β alloys

scientific article published in January 2015

Hybrid discrete dislocation models for fatigue crack growth

scientific article published in September 2010

Identification of Plastic Properties From Conical Indentation Using a Bayesian-Type Statistical Approach

scientific article published in October 2018

Indentation of elastically soft and plastically compressible solids

scientific article published on 15 July 2015

Indentation of pressurized viscoplastic polymer spherical shells

scientific article published in August 2016

Influence of Grain Size Distribution on Ductile Intergranular Crack Growth Resistance

scientific article published on 21 November 2019

Limits on Transformation Strains for Non-Negative Dissipation

scientific article published on 5 March 2019

Local relative density modulates failure and strength in vertically aligned carbon nanotubes

scientific article

Material inertia and size effects in the Charpy V-notch test

Material rate dependence and localized deformation in crystalline solids

scientific article published in December 1983

Mesh-independent discrete numerical representations of cohesive-zone models

scientific article published in January 2006

Micromechanics Simulations of Fracture

scientific article published in August 2002

Multi-asperity contact: A comparison between discrete dislocation and crystal plasticity predictions

scientific article published on 21 October 2008

Nonuniform and localized deformation in single crystals under dynamic tensile loading

scientific article published in April 2019

Numerical implementation of non-local polycrystal plasticity using fast Fourier transforms

scientific article published in December 2016

Numerical simulations of fast crack growth in brittle solids

Overview no. 42 Texture development and strain hardening in rate dependent polycrystals

scientific article published in June 1985

Phenomenological modeling of the effect of specimen thickness on the creep response of Ni-based superalloy single crystals

scientific article published in October 2013

Plastic creep flow effects in the diffusive cavitation of grain boundaries

article

Plastic deformation of freestanding thin films: Experiments and modeling

scientific article published in October 2006

Plasticity size effects in tension and compression of single crystals

scientific article published in December 2005

Polymer indentation: Numerical analysis and comparison with a spherical cavity model

scientific article published in September 2011

Porosity evolution in a creeping single crystal

scientific article published on 21 February 2012

Prediction of Ductile Fracture Surface Roughness Scaling

scientific article published on 5 April 2012

Relaxation of Thermal Stress by Dislocation Motion in Passivated Metal Interconnects

scientific article published in April 2004

Reply to “Comment on ‘dislocation dynamics is chaotic”’

scientific article published in March 2005

Scaling of discrete dislocation predictions for near-threshold fatigue crack growth

scientific article published in September 2003

Simple Method for Estimating Relaxation in Silicon from Higher Order Laue Zone Line Splitting

scientific article published in August 2008

Size Effects in the Charpy V-Notch Test

Size dependence of energy storage and dissipation in a discrete dislocation plasticity analysis of static friction

scientific article published in July 2005

Size effects in aluminium alloy castings

Size effects in polycrystalline thin films analyzed by discrete dislocation plasticity

scientific article published in May 2005

Size effects in single asperity frictional contacts

scientific article published on 7 December 2006

Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis

scientific article published on 9 March 2006

Slip modes and partitioning of energy during dynamic frictional sliding between identical elastic–viscoplastic solids

scientific article published on 10 September 2009

Statistical aspects of discrete dislocation plasticity

scientific article published in March 2006

Stochastic microcrack nucleation in lamellar solids

scientific article published in September 2003

Surface versus bulk nucleation of dislocations during contact

scientific article published in June 2007

The Effect of Rate Dependence on Localization of Deformation and Failure in Softening Solids

scientific article published in February 2015

The effect of indenter shape on sub-micron indentation according to discrete dislocation plasticity

scientific article published on 7 December 2006

The effect of loading rate on ductile fracture toughness and fracture surface roughness

scientific article published in March 2015

The stored energy of cold work: Predictions from discrete dislocation plasticity

scientific article published in October 2005

Three dimensional microstructural effects on plane strain ductile crack growth

scientific article published in October 2006

Two hardening mechanisms in single crystal thin films studied by discrete dislocation plasticity

scientific article published on 11 May 2005

Void Nucleation Effects in Biaxially Stretched Sheets

scientific article published in July 1980

Void growth versus void collapse in a creeping single crystal

scientific article published in May 2013