Search filters

List of works by Ricardo F. Ribeiro

A 3-year longitudinal prospective study assessing microbial profile and clinical outcomes of single-unit cement-retained implant restorations: Zirconia versus titanium abutments

scientific article published on 05 February 2020

A Digital Image Correlation Analysis of Strain Generated by 3-Unit Implant-Supported Fixed Dental Prosthesis: An In Vitro Study.

scientific article published on 5 April 2017

A Three-Dimensional Finite Element Analysis of the Stress Distribution Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges with Regular or Short Morse Taper Implants

scientific article published in March 2017

A three-dimensional finite element analysis of the stress distribution on morse taper implants surface

scientific article published in July 2013

Abutment rotational freedom evaluation of external hexagon single-implant restorations after mechanical cycling.

scientific article published on 11 January 2012

Abutments with reduced diameter for both cement and screw retentions: analysis of failure modes and misfit of abutment-crown-connections after cyclic loading

scientific article published on 29 February 2016

An alternative section method for casting and posterior laser welding of metallic frameworks for an implant-supported prosthesis

scientific article

An in vitro study of non-axial forces upon the retention of an O-ring attachment.

scientific article published on 4 August 2009

Bacterial adhesion on the titanium and zirconia abutment surfaces.

scientific article

Biomechanical behavior of titanium and zirconia frameworks for implant-supported full-arch fixed dental prosthesis

scientific article

Castability and resistance of ceramometal bonding in Ni-Cr and Ni-Cr-Be alloys

scientific article published on 01 March 2001

Clinical evaluation of interocclusal recording materials in bilateral free end cases

scientific article published in January 2005

Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium

scientific article

Comparative study of circumferential clasp retention force for titanium and cobalt-chromium removable partial dentures

scientific article published on 01 September 2002

Comparative study of two commercially pure titanium casting methods

scientific article

Comparison of the correlation of photoelasticity and digital imaging to characterize the load transfer of implant-supported restorations.

scientific article published on 23 January 2014

Correlation between vertical misfits and stresses over implants from castable frameworks made of different alloys.

scientific article

Custom Morse taper zirconia abutments: Influence on marginal fit and torque loss before and after thermomechanical cycling

scientific article

Device for recording the path of insertion for removable partial dentures

scientific article published on 01 August 2000

Digital image correlation analysis of the load transfer by implant-supported restorations.

scientific article

Digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution.

scientific article

Ear symptomatology and occlusal factors: a clinical report

scientific article

Effect of acetyl resin retentive arms on the retentive force of circumferential clasps: An in vitro study ⬇️

scientific article published on November 21, 2011

Effect of beryllium on the castability and resistance of ceramometal bonds in nickel-chromium alloys.

scientific article published in November 1998

Effect of cyclic loading on the vertical microgap of long-span zirconia frameworks supported by 4 or 6 implants.

scientific article

Effect of different investments and mold temperatures on titanium mechanical properties

scientific article published in January 2012

Effect of fluoride sodium mouthwash solutions on cpTI: evaluation of physicochemical properties ⬇️

scientific article published on January 1, 2012

Effect of laser welding on the titanium ceramic tensile bond strength ⬇️

scientific article published on May 27, 2011

Effect of phosphate-bonded investments on titanium reaction layer and crown fit.

scientific article published on April 2010

Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study.

scientific article

Effect of surface treatment on the bond strength between yttria partially stabilized zirconia ceramics and resin cement

scientific article published on 12 February 2014

Effect of whitening toothpaste on titanium and titanium alloy surfaces

scientific article published on 19 July 2012

Effects of chemical composition on the corrosion of dental alloys

scientific article published on 01 January 2012

Effects of surface treatments on mechanical behavior of sintered and pre-sintered yttria-stabilized zirconia and reliability of crowns and abutments processed by CAD/CAM

scientific article published on 20 May 2019

Endodontically treated teeth: characteristics and considerations to restore them.

scientific article published on 14 August 2010

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

scientific article published on 17 August 2005

Experimental titanium alloys for dental applications.

scientific article

Fabrication of an acrylic resin device used to increase the size of toothbrush handles

scientific article

Fracture Strength of Weakened Anterior Teeth Associated to Different Reconstructive Techniques.

scientific article published on September 2016

Fracture loads and failure modes of customized and non-customized zirconia abutments

scientific article published on 05 May 2018

Genome analysis and clinical implications of the bacterial communities in early biofilm formation on dental implants restored with titanium or zirconia abutments.

scientific article published on 16 January 2018

Impact of temperature and time storage on the microbial detection of oral samples by Checkerboard DNA-DNA hybridization method.

scientific article published on 24 October 2013

Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study.

scientific article published on September 2013

Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique.

scientific article published in July 2012

In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations

scientific article published in October 2015

In vitro cytotoxicity of dental alloys and cpTi obtained by casting.

scientific article published on May 2008

In vivo evaluation of Candida spp. adhesion on titanium or zirconia abutment surfaces.

scientific article

Influence of Cyclic Fatigue in Water on Screw Torque Loss of Long-Span One-Piece Implant-Supported Zirconia Frameworks

scientific article published on 3 December 2015

Influence of Manufacturing Methods of Implant-Supported Crowns on External and Internal Marginal Fit: A Micro-CT Analysis.

scientific article

Influence of the casting processing route on the corrosion behavior of dental alloys

scientific article published on 09 October 2014

Influence of the interimplant distance on crestal bone resorption and bone density: a histomorphometric study in dogs.

scientific article

Internal adaptation of cast titanium crowns.

scientific article published on August 2007

Internal and Marginal Fit and Fracture Strength of Narrow Diameter Dental Implant-Abutment Assembly

scientific article published on 01 March 2020

Loss of preload in screwed implant joints as a function of time and tightening/untightening sequences

scientific article

Marginal fit and microbial leakage along the implant-abutment interface of fixed partial prostheses: An in vitro analysis using Checkerboard DNA-DNA hybridization.

scientific article published on 7 September 2015

Mechanical analysis of conventional and small diameter conical implant abutments.

scientific article

Mechanical comparison of experimental conical-head abutment screws with conventional flat-head abutment screws for external-hex and internal tri-channel implant connections: an in vitro evaluation of loosening torque.

scientific article published in November 2013

Microbiome of titanium and zirconia dental implants abutments

scientific article published on 23 November 2015

Microleakage at Different Implant-Abutment Connections Under Unloaded and Loaded Conditions

scientific article

Modified section method for laser-welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks.

scientific article

Oral bacterial colonization on dental implants restored with titanium or zirconia abutments: 6-month follow-up

scientific article

Oral biofilm formation on the titanium and zirconia substrates

scientific article published on 26 October 2012

Photoelastic Analysis of Stresses Transmitted by Universal Cast to Long Abutment on Implant-Supported Single Restorations Under Static Occlusal Loads

scientific article published in November 2012

Photoelastic comparison of as-cast and laser-welded implant frameworks

scientific article published on 3 September 2015

Photoelastic stress analysis of different designs of cement-retained fixed partial dentures on Morse taper oral implants.

scientific article

Prosthetic misfit of implant-supported prosthesis obtained by an alternative section method ⬇️

scientific article published on May 30, 2012

Reliability of FEA on the Results of Mechanical Properties of Materials

scientific article published on December 2015

Retention and stress distribution in distal extension removable partial dentures with and without implant association

scientific article published in January 2013

Strain transfer behavior of different planning options for mandibular single-molar replacement.

scientific article

Stress Over Implants of One-Piece Cast Frameworks Made With Different Materials

scientific article published on 10 December 2015

Surveying removable partial dentures: the importance of guiding planes and path of insertion for stability

scientific article published on 01 October 1997

Tensile Strength of Resin Cements Used with Base Metals in a Simulating Passive Cementation Technique for Implant-Supported Prostheses

scientific article published in October 2016

Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents

scientific article published in February 2008

Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents

scientific article published in October 2010

The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments

scientific article published on 16 August 2010

The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks

scientific article

The effect of mold temperature on castability of CP Ti and Ti-6Al-4V castings into phosphate bonded investment materials.

scientific article

The use of a mandibular repositioning device for obstructive sleep apnea

scientific article

Three-Dimensional Finite Element Analysis of Stress Distribution on Different Bony Ridges With Different Lengths of Morse Taper Implants and Prosthesis Dimensions

scientific article published in November 2012

Three-dimensional finite element analysis of endodontically treated teeth with weakened radicular walls restored with different protocols

scientific article published on 20 May 2015

Torque loss of different abutment sizes before and after cyclic loading

scientific article published in November 2015

Torque loss under mechanical cycling of long-span zirconia and titanium-cemented and screw-retained implant-supported CAD/CAM frameworks.

scientific article published on December 2014

Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study.

scientific article

Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation.

scientific article

Wear resistance and compression strength of ceramics tested in fluoride environments

scientific article

Wear resistance of experimental titanium alloys for dental applications

scientific article

Paulina is supported by:

About Paulina

Help