Search filters

List of works by Jusef Hassoun

A Gel-Polymer Sn-C/LiMn0.5Fe0.5PO4 Battery Using a Fluorine-Free Salt

scientific article published on 17 September 2015

A High Voltage Olivine Cathode for Application in Lithium-Ion Batteries

scientific article published on 23 December 2015

A Lithium-Ion Sulfur Battery Based on a Carbon-Coated Lithium-Sulfide Cathode and an Electrodeposited Silicon-Based Anode

article published in 2014

A Long-Life Lithium Ion Battery with Enhanced Electrode/Electrolyte Interface by Using an Ionic Liquid Solution

scientific article published on 15 March 2016

A Nanostructured Sn-C Composite Lithium Battery Electrode with Unique Stability and High Electrochemical Performance

scholarly article by Jusef Hassoun et al published 18 August 2008 in Advanced Materials

A New CuO-Fe2 O3 -Mesocarbon Microbeads Conversion Anode in a High-Performance Lithium-Ion Battery with a Li1.35 Ni0.48 Fe0.1 Mn1.72 O4 Spinel Cathode.

scientific article published on 10 January 2017

A New, Safe, High-Rate and High-Energy Polymer Lithium-Ion Battery

A Novel Concept for the Synthesis of an Improved LiFePO[sub 4] Lithium Battery Cathode

A Polymer Lithium-Oxygen Battery

scientific article

A QuaternaryPoly(ethylene carbonate)-Lithium Bis(trifluoromethanesulfonyl)imide-Ionic Liquid-Silica Fiber Composite Polymer Electrolyte for Lithium Batteries

A SnSb–C nanocomposite as high performance electrode for lithium ion batteries

A comparative study of layered transition metal oxide cathodes for application in sodium-ion battery

scientific article published on 27 February 2015

A contribution to the progress of high energy batteries: A metal-free, lithium-ion, silicon–sulfur battery

scholarly article by Jusef Hassoun et al published March 2012 in Journal of Power Sources

A high capacity, template-electroplated Ni–Sn intermetallic electrode for lithium ion battery

A high-rate long-life Li4Ti5O12/Li[Ni0.45Co0.1Mn1.45]O4 lithium-ion battery

scientific article published in Nature Communications

A lithium ion battery using nanostructured Sn–C anode, LiFePO4 cathode and polyethylene oxide-based electrolyte

A lithium-ion sulfur battery using a polymer, polysulfide-added membrane.

scientific article published on 5 January 2015

A long-life lithium ion sulfur battery exploiting high performance electrodes

scientific article published on 01 October 2015

A metal-free, lithium-ion oxygen battery: a step forward to safety in lithium-air batteries.

scientific article

A new Sn-C/LiFe0.1Co0.9PO4 full lithium-ion cell with ionic liquid-based electrolyte

A new lithium-ion battery using 3D-array nanostructured graphene-sulfur cathode and silicon oxide-based anode.

scientific article published on 28 February 2018

A new, high energy Sn-C/Li[Li(0.2)Ni(0.4)/3Co(0.4)/3Mn(1.6/3)]O2 lithium-ion battery

scientific article published on 22 July 2014

A safe, high-rate and high-energy polymer lithium-ion battery based on gelled membranes prepared by electrospinning

A structural, spectroscopic and electrochemical study of a lithium ion conducting Li10GeP2S12 solid electrolyte

A tetraethylene glycol dimethylether-lithium bis(oxalate)borate (TEGDME-LiBOB) electrolyte for advanced lithium ion batteries

A transmission electron microscopy study of the electrochemical process of lithium-oxygen cells.

scientific article

Acid–gel-immobilized, nanoporous composite, protonic membranes as low cost system for Direct Methanol Fuel Cells

Advanced Na[Ni0.25Fe0.5Mn0.25]O2/C-Fe3O4 sodium-ion batteries using EMS electrolyte for energy storage

scientific article

Advanced electrolyte and electrode materials for lithium polymer batteries

Alternative materials for sodium ion–sulphur batteries

An Advanced Lithium Ion Battery Based on High Performance Electrode Materials

scholarly article by Jusef Hassoun et al published 9 March 2011 in Journal of the American Chemical Society

An Advanced Lithium-Ion Battery Based on a Graphene Anode and a Lithium Iron Phosphate Cathode

scholarly article by Jusef Hassoun et al published 22 July 2014 in Nano Letters

An Advanced Lithium-Sulfur Battery

article published in 2012

An Advanced Lithium–Air Battery Exploiting an Ionic Liquid-Based Electrolyte

scientific article published on 28 October 2014

An advanced lithium-ion battery based on a nanostructured Sn–C anode and an electrochemically stable LiTFSi-Py24TFSI ionic liquid electrolyte

An advanced sodium-ion rechargeable battery based on a tin–carbon anode and a layered oxide framework cathode

An electrochemical investigation of a Sn–Co–C ternary alloy as a negative electrode in Li-ion batteries

An improved high-performance lithium-air battery

scientific article published on 10 June 2012

Characteristics of Li2S8-tetraglyme catholyte in a semi-liquid lithium–sulfur battery

Comparative Study of Ether-Based Electrolytes for Application in Lithium-Sulfur Battery.

scientific article published on 22 June 2015

Comparison between microparticles and nanostructured particles of FeSn2 as anode materials for Li-ion batteries

Composite poly(ethylene oxide) electrolytes plasticized by N-alkyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide for lithium batteries

scientific article published on 13 May 2013

Decomposition of ethylene carbonate on electrodeposited metal thin film anode

Determination of the safety level of an advanced lithium ion battery having a nanostructured Sn–C anode, a high voltage LiNi0.5Mn1.5O4 cathode, and a polyvinylidene fluoride-based gel electrolyte

Electrochemical characteristics of iron oxide nanowires during lithium-promoted conversion reaction

Electrochemical impedance characterization of FeSn2 electrodes for Li-ion batteries

Electrochemical performance of a graphene nanosheets anode in a high voltage lithium-ion cell.

scientific article published on 4 November 2013

Electrochemical properties of a poly(ethylene carbonate)-LiTFSI electrolyte containing a pyrrolidinium-based ionic liquid

Electrodeposited Ni–Sn intermetallic electrodes for advanced lithium ion batteries

Enhanced Lithium Oxygen Battery Using a Glyme Electrolyte and Carbon Nanotubes

scientific article published on 03 May 2018

Enhanced lithium battery with polyethylene oxide-based electrolyte containing silane-Al2 O3 ceramic filler

scientific article published on 11 June 2013

Graphene Decorated by Indium Sulfide Nanoparticles as High-Performance Anode for Sodium-Ion Batteries

scientific article published on 19 June 2017

High Voltage Li-Ion Battery Using Exfoliated Graphite/Graphene Nanosheets Anode.

scientific article published on 19 April 2016

High performance PEO-based polymer electrolytes and their application in rechargeable lithium polymer batteries

High surface area, mesoporous carbon for low-polarization, catalyst-free lithium oxygen battery

High-Rate, Long-Life Ni–Sn Nanostructured Electrodes for Lithium-Ion Batteries

scholarly article by Jusef Hassoun et al published 18 June 2007 in Advanced Materials

High-power lithium polysulfide-carbon battery

scholarly article in Carbon, vol. 96, January 2016

Highly Cyclable Lithium-Sulfur Batteries with a Dual-Type Sulfur Cathode and a Lithiated Si/SiOx Nanosphere Anode.

scientific article published on 9 April 2015

Hot-pressed, dry, composite, PEO-based electrolyte membranes

Hot-pressed, solvent-free, nanocomposite, PEO-based electrolyte membranes

Hybrid membranes based on sulfated titania nanoparticles as low-cost proton conductors

article published in 2013

In-Situ X-Ray Diffraction Study of the Li-Alloying Electrochemical Process in a Tin-Carbon Nanocomposite Electrode

In-situ gelled electrolyte for lithium battery: Electrochemical and Raman characterization

Influence of temperature on lithium-oxygen battery behavior

scientific article published on 23 May 2013

Influence of the porosity degree of poly(vinylidene fluoride-co-hexafluoropropylene) separators in the performance of Li-ion batteries

Insight on the Li2S electrochemical process in a composite configuration electrode.

scientific article published on 25 January 2016

Interphase Evolution of a Lithium-Ion/Oxygen Battery

scientific article published on 21 September 2015

Investigation of the O2 Electrochemistry in a Polymer Electrolyte Solid-State Cell

scientific article published on 01 March 2011

Investigation of the carbon electrode changes during lithium oxygen cell operation in a tetraglyme-based electrolyte

article

Li-LiFePO4 rechargeable polymer battery using dual composite polymer electrolytes

Lithium Metal Battery Using LiFe0.5Mn0.5PO4 Olivine Cathode and Pyrrolidinium-Based Ionic Liquid Electrolyte

scientific article published on 01 August 2018

Lithium sulfur battery exploiting material design and electrolyte chemistry: 3D graphene framework and diglyme solution

Lithium-ion batteries. A look into the future

scholarly article by Bruno Scrosati et al published 2011 in Energy and Environmental Science

Lithium-iron battery: Fe2O3 anode versus LiFePO4 cathode

Low-Polarization Lithium-Oxygen Battery Using [DEME][TFSI] Ionic Liquid Electrolyte

scientific article

Magnetism in lithium-oxygen discharge product.

scientific article published on 13 May 2013

Mechanically milled, nanostructured SnC composite anode for lithium ion battery

Mechanochemical synthesis and electrochemical properties of nanostructured electrode materials for Li ion batteries

article published in 2008

Metal Alloy Electrode Configurations For Advanced Lithium-Ion Batteries

Moving to a solid-state configuration: a valid approach to making lithium-sulfur batteries viable for practical applications

scientific article published on 01 December 2010

Multiwalled Carbon Nanotubes Anode in Lithium-Ion Battery with LiCoO2, Li[Ni1/3Co1/3Mn1/3]O2, and LiFe1/4Mn1/2Co1/4PO4 Cathodes

Nanocomposite PEO-based polymer electrolyte using a highly porous, super acid zirconia filler

Nanostructured Sn–C Composite as an Advanced Anode Material in High-Performance Lithium-Ion Batteries

scholarly article by G. Derrien et al published 3 September 2007 in Advanced Materials

Nanostructured tin–carbon/ LiNi 0.5 Mn 1.5 O 4 lithium-ion battery operating at low temperature

New Electrode and Electrolyte Configurations for Lithium-Oxygen Battery

scientific article published on 15 December 2017

New electrochemical process for the in situ preparation of metal electrodes for lithium-ion batteries

Nickel-Layer Protected, Carbon-Coated Sulfur Electrode for Lithium Battery

scholarly article by Jusef Hassoun et al published 2012 in Journal of the Electrochemical Society

Novel configuration of poly(vinylidenedifluoride)-based gel polymer electrolyte for application in lithium-ion batteries

Phase Transitions in Polymers for Lithium Batteries

Pitch Carbon-coated Lithium Sulfide Electrode for Advanced, Lithium-metal Free-sulfur Batteries

Poly(ethylenglycol)dimethylether–lithium bis(trifluoromethanesulfonyl)imide, PEG500DME–LiTFSI, as high viscosity electrolyte for lithium ion batteries

article published in 2013

Progress in lithium-sulfur batteries: the effective role of a polysulfide-added electrolyte as buffer to prevent cathode dissolution.

scientific article published on 13 August 2013

Quaternary Polyethylene Oxide Electrolytes Containing Ionic Liquid for Lithium Polymer Battery

Recent advances in liquid and polymer lithium-ion batteries

Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery

scholarly article by Jusef Hassoun et al published January 2011 in Journal of Power Sources

Reduction phases of thin iron-oxide nanowires upon thermal treatment and Li exposure

Relevant Features of a Triethylene Glycol Dimethyl Ether-Based Electrolyte for Application in Lithium Battery

scientific article

Reversible NaFePO4 electrode for sodium secondary batteries

Role of the Lithium Salt in the Performance of Lithium-Oxygen Batteries: A Comparative Study

Silicon-based nanocomposite for advanced thin film anodes in lithium-ion batteries

article published in 2012

Sodium-Ion Battery based on an Electrochemically Converted NaFePO4Cathode and Nanostructured Tin-Carbon Anode

Stable, High Voltage Li0.85Ni0.46Cu0.1Mn1.49O4 Spinel Cathode in a Lithium-Ion Battery Using a Conversion-Type CuO Anode

The Role of AlF3 Coatings in Improving Electrochemical Cycling of Li-Enriched Nickel-Manganese Oxide Electrodes for Li-Ion Batteries

scholarly article by Yang-Kook Sun et al published 24 February 2012 in Advanced Materials

The effect of CoSn/CoSn2 phase ratio on the electrochemical behaviour of Sn40Co40C20 ternary alloy electrodes in lithium cells

The lithium/air battery: still an emerging system or a practical reality?

scientific article

The role of the interface of tin electrodes in lithium cells: An impedance study

article

The role of the morphology in the response of Sb–C nanocomposite electrodes in lithium cells

article

Understanding problems of lithiated anodes in lithium oxygen full-cells

X-ray Nano-computed Tomography of Electrochemical Conversion in Lithium-ion Battery

scientific article published on 16 July 2019

Paulina is supported by:

About Paulina

Help