List of works - Jun-Bo Yoon

3-D construction of monolithic passive components for RF and microwave ICs using thick-metal surface micromachining technology

>1000-Fold Lifetime Extension of Nickel Electromechanical Contact Device via Graphene.

scientific article published on 20 February 2018

A 3-D planar microlens for an effective monolithic optical interconnection system

A CMOS label-free DNA sensor using electrostatic induction of molecular charges

scientific article published on 28 October 2011

A Complementary Dual-Contact MEMS Switch Using a “Zipping” Technique

A Low Contact Resistance 4-Terminal Mems Relay: Theoretical Analysis, Design, and Demonstration

A Proactive Plastic Deformation Method for Fine-Tuning of Metal-Based MEMS Devices After Fabrication

A conventional route to scalable morphology-controlled regular structures and their superhydrophobic/hydrophilic properties for biochips application.

scientific article published on 16 June 2009

A mechanical and electrical transistor structure (METS) with a sub-2 nm nanogap for effective voltage scaling

scientific article published on July 2014

A new approach to control a deflection of an electroplated microstructure: dual current electroplating methods

A simple and effective fabrication method for various 3D microstructures: backside 3D diffuser lithography

article published in 2008

A simple and effective lift-off with positive photoresist

A simple breathing rate-sensing method exploiting a temporarily condensed water layer formed on an oxidized surface

article published in 2015

A sub-1-volt nanoelectromechanical switching device

scientific article published on 25 November 2012

A trans-scaled nanofabrication using 3D diffuser lithography, metal molding and nano-imprinting

Actively transparent display with enhanced legibility based on an organic light-emitting diode and a cholesteric liquid crystal blind panel

scientific article published in April 2013

Adhesion Force Change by Electrowetting on a Polymer Microlens Array

An Electrostatically Actuated Stacked-Electrode MEMS Relay With a Levering and Torsional Spring for Power Applications

article

An Extremely Low Contact-Resistance MEMS Relay Using Meshed Drain Structure and Soft Insulating Layer

article published in 2011

An effective light-extracting microstructure for a single-sheet backlight unit for liquid crystal display

An ultra-low voltage MEMS switch using stiction-recovery actuation

article published in 2013

Chemo-Mechanically Operating Palladium-Polymer Nanograting Film for a Self-Powered H<sub>2</sub> Gas Sensor

scientific article published on 02 December 2020

Complementary Dual-Contact Switch Using Soft and Hard Contact Materials for Achieving Low Contact Resistance and High Reliability Simultaneously

Design and fabrication of a micropatterned polydimethylsiloxane (PDMS) light-guide plate for sheet-less LCD backlight unit

Edge-lit LCD backlight unit for 2D local dimming

scientific article published on 01 August 2018

Electrostatic micro-actuator with a pre-charged series capacitor: modeling, design, and demonstration

Fabrication and characterization of a nanoelectromechanical switch with 15-nm-thick suspension air gap

Fabrication of a uniform microlens array over a large area using self-aligned diffuser lithography (SADL)

Fabrication of three-dimensional SiC-based ceramic micropatterns using a sequential micromolding-and-pyrolysis process

First Lateral Contact Probing of 55- $\mu$ m Fine Pitch Micro-Bumps

Geometrically Structured Nanomaterials for Nanosensors, NEMS, and Nanosieves

scientific article published on 06 April 2020

High performance microshutter device with space-division modulation

High throughput ultralong (20 cm) nanowire fabrication using a wafer-scale nanograting template

High-Performance Copper Oxide Visible-Light Photodetector via Grain-Structure Model

scientific article published on 14 May 2019

Industrial Grade, Bending-Insensitive, Transparent Nanoforce Touch Sensor via Enhanced Percolation Effect in a Hierarchical Nanocomposite Film

article published in 2018

Integration of a Carbon Nanotube Network on a Microelectromechanical Switch for Ultralong Contact Lifetime

scientific article published on 08 May 2019

Investigation of the Nanoparticle Electrical Contact Lubrication in MEMS Switches

Linear frequency tuning in an LC-resonant system using a C–V response controllable MEMS varactor

Liquid-based electrostatic energy harvester with high sensitivity to human physical motion

MEMS-Based Tunable LC Bandstop Filter With an Ultra-Wide Continuous Tuning Range

Material-Independent Nanotransfer onto a Flexible Substrate Using Mechanical-Interlocking Structure

scientific article published on 28 March 2018

Mechanical Reliability of a Digital Micromirror With Interdigitated Cantilevers

Mechanically Operated Random Access Memory (MORAM) Based on an Electrostatic Microswitch for Nonvolatile Memory Applications

Microlens array diffuser for a light-emitting diode backlight system

scientific article published in October 2006

Modeling, Design, Fabrication, and Demonstration of a Digital Micromirror With Interdigitated Cantilevers

Multi-resonant energy harvester exploiting high-mode resonances frequency down-shifted by a flexible body beam

NEMS switch with 30nm-thick beam and 20nm-thick air-gap for high density non-volatile memory applications

Nanomechanical Encoding Method Using Enhanced Thermal Concentration on a Metallic Nanobridge

scientific article published on 14 July 2017

Nanotransplantation Printing of Crystallographic-Orientation-Controlled Single-Crystalline Nanowire Arrays on Diverse Surfaces.

scientific article published on 13 November 2017

Optically Selective Microlens Photomasks Using Self-Assembled Smectic Liquid Crystal Defect Arrays

scientific article published on 01 June 2010

Realization of Nanolene: A Planar Array of Perfectly Aligned, Air-Suspended Nanowires

scientific article published on 19 February 2020

Realization of large-scale sub-10 nm nanogratings using a repetitive wet-chemical oxidation and etching technique

Self-assembled monolayer-assisted thin metal polishing for fabricating uniform 3D microstructures

Shape-controlled, high fill-factor microlens arrays fabricated by a 3D diffuser lithography and plastic replication method

scientific article published on 01 December 2004

Simple liquid crystal display backlight unit comprising only a single-sheet micropatterned polydimethylsiloxane (PDMS) light-guide plate

scientific article published in September 2007

Spontaneous Lamellar Alignment in Thickness-Modulated Block Copolymer Films

Stepwise Actuation of an Electrostatic Bimorph Cantilever Actuator Using a Patterned Bottom Electrode

article published in 2016

Stress-engineered palladium nanowires for wide range (0.1%-3.9%) of H2 detection with high durability

scientific article published on 16 July 2019

Transparent conducting hybrid thin films fabricated by layer-by-layer assembly of single-wall carbon nanotubes and conducting polymers

Use of a Columnar Metal Thin Film as a Nanosieve with Sub‐10 nm Pores ⬇️

scientific article published on June 22, 2012

Use of nanoporous columnar thin film in the wafer-level packaging of MEMS devices

Versatile Transfer of an Ultralong and Seamless Nanowire Array Crystallized at High Temperature for Use in High-Performance Flexible Devices

scientific article

List of works by Jun-Bo Yoon