Search filters

List of works by Dennis Janssen

3D geometry analysis of the medial meniscus--a statistical shape modeling approach.

scientific article published on 23 July 2014

A combined experimental and finite element approach to analyse the fretting mechanism of the head-stem taper junction in total hip replacement

scientific article published on June 2017

A comparison between dynamic implicit and explicit finite element simulations of the native knee joint

scientific article published on 24 June 2016

A modelling approach demonstrating micromechanical changes in the tibial cemented interface due to in vivo service

scientific article published on 27 February 2017

A new approach to quantify trabecular resorption adjacent to cemented knee arthroplasty ⬇️

scientific article published on January 9, 2012

A noninvasive MRI based approach to estimate the mechanical properties of human knee ligaments

scientific article published on 07 February 2019

A preclinical numerical assessment of a polyetheretherketone femoral component in total knee arthroplasty during gait

scientific article published on February 2017

An experimental study to investigate biomechanical aspects of the initial stability of press-fit implants.

scientific article published on 25 November 2014

Anterior referencing of tibial slope in total knee arthroplasty considerably influences knee kinematics: a musculoskeletal simulation study.

scientific article published on 12 May 2017

Balancing incompatible endoprosthetic design goals: a combined ingrowth and bone remodeling simulation

scientific article published on 9 December 2010

Biomechanical comparison of two different locking plates for open wedge high tibial osteotomy

scientific article published on 9 October 2017

Computational assessment of press-fit acetabular implant fixation: the effect of implant design, interference fit, bone quality, and frictional properties

scientific article published on 01 January 2010

Does high-flexion total knee arthroplasty promote early loosening of the femoral component?

scientific article

Effect of cementing technique and cement type on thermal necrosis in hip resurfacing arthroplasty--a numerical study

scientific article

Evaluation of a Surrogate Contact Model in Force-Dependent Kinematic Simulations of Total Knee Replacement

scientific article published on 2 May 2017

Evaluation of interference fit and bone damage of an uncemented femoral knee implant.

scientific article published on 31 October 2017

Experimental Measurement of the Static Coefficient of Friction at the Ti-Ti Taper Connection in Total Hip Arthroplasty

scientific article published on 01 March 2016

Experimental and computational analysis of micromotions of an uncemented femoral knee implant using elastic and plastic bone material models.

scientific article

Experimental and computational micromechanics at the tibial cement-trabeculae interface

scientific article published on 02 April 2016

Experimental micromechanics of the cement-bone interface.

scientific article published on June 2008

Experimental pre-clinical assessment of the primary stability of two cementless femoral knee components.

scientific article

Experimental versus computational analysis of micromotions at the implant-bone interface

scientific article published on 01 January 2011

FE analysis of the effects of simplifications in experimental testing on micromotions of uncemented femoral knee implants

scientific article published on 21 October 2015

Fatigue creep damage at the cement-bone interface: an experimental and a micro-mechanical finite element study.

scientific article published on 13 August 2009

Feasibility study of intraoperative cone-beam CT navigation for benign bone tumour surgery

scientific article published on 20 March 2019

Finite element analysis of the effect of cementing concepts on implant stability and cement fatigue failure.

scientific article published on June 2009

Finite element analysis of the long-term fixation strength of cemented ceramic cups

scientific article published on 01 May 2006

Finite element simulation of cement-bone interface micromechanics: a comparison to experimental results.

scientific article published on October 2009

Finite element wear prediction using adaptive meshing at the modular taper interface of hip implants

scientific article published on 27 October 2017

Finite element-based preclinical testing of cemented total hip implants

scientific article published in March 2007

Fixation strength of a polyetheretherketone femoral component in total knee arthroplasty

scientific article published on 12 July 2017

Flexing and downsizing the femoral component is not detrimental to patellofemoral biomechanics in posterior-referencing cruciate-retaining total knee arthroplasty.

scientific article published on 20 March 2018

Functional biomechanical performance of a novel anatomically shaped polycarbonate urethane total meniscus replacement

scientific article

Generating finite element models of the knee: How accurately can we determine ligament attachment sites from MRI scans?

scientific article

Improving peri-prosthetic bone adaptation around cementless hip stems: a clinical and finite element study.

scientific article

Improving stress shielding following total hip arthroplasty by using a femoral stem made of β type Ti-33.6Nb-4Sn with a Young's modulus gradation.

scientific article published on 24 August 2017

In-situ mechanical behavior and slackness of the anterior cruciate ligament at multiple knee flexion angles.

scientific article published on 22 December 2015

Incorporating in vivo fall assessments in the simulation of femoral fractures with finite element models

scientific article published on 16 April 2015

Inducing targeted failure in cadaveric testing of 3-segment spinal units with and without simulated metastases.

scientific article published on 8 December 2017

Interface micromechanics of transverse sections from retrieved cemented hip reconstructions: an experimental and finite element comparison

scientific article

Material properties of the human posterior knee capsule

scientific article published on January 2015

Micro-mechanical modeling of the cement-bone interface: the effect of friction, morphology and material properties on the micromechanical response

scientific article published on 10 October 2008

Mixed-mode failure strength of implant-cement interface specimens with varying surface roughness

scientific article published on 12 November 2010

Mixed-mode loading of the cement-bone interface: a finite element study.

scientific article published in February 2011

Morphology based cohesive zone modeling of the cement-bone interface from postmortem retrievals

scientific article

Multi-axial loading micromechanics of the cement-bone interface in postmortem retrievals and lab-prepared specimens

scientific article

On stabilization of loosened hip stems via cement injection into osteolytic cavities.

scientific article

Relaxation of the MCL after an Open-Wedge High Tibial Osteotomy results in decreasing contact pressures of the knee over time

scientific article published on 15 February 2017

Releasing the circumferential fixation of the medial meniscus does not affect its kinematics

scientific article

Strain shielding in trabecular bone at the tibial cement-bone interface.

scientific article published on 10 November 2016

TLEM 2.0 - a comprehensive musculoskeletal geometry dataset for subject-specific modeling of lower extremity

scientific article published on 8 January 2015

The assessment of the risk of fracture in femora with metastatic lesions: comparing case-specific finite element analyses with predictions by clinical experts

scientific article published on 01 August 2012

The behavior of the micro-mechanical cement-bone interface affects the cement failure in total hip replacement.

scientific article published on 30 October 2010

The contradictory effects of pores on fatigue cracking of bone cement

scientific article published on 01 August 2005

The effect of bone ingrowth depth on the tensile and shear strength of the implant-bone e-beam produced interface

scientific article published on 21 August 2011

The effect of cement creep and cement fatigue damage on the micromechanics of the cement–bone interface ⬇️

scientific article published on August 7, 2010

The effect of surface morphology on the primary fixation strength of uncemented femoral knee prosthesis: a cadaveric study.

scientific article published on 2 October 2014

The importance of a thick cement mantle depends on stem geometry and stem-cement interfacial bonding

scientific article published on 01 April 2009

The influence of ligament modelling strategies on the predictive capability of finite element models of the human knee joint

scientific article

The mechanical effects of different levels of cement penetration at the cement-bone interface.

scientific article

The mechanical response of a polyetheretherketone femoral knee implant under a deep squatting loading condition.

scientific article published in November 2017

The peripheral soft tissues should not be ignored in the finite element models of the human knee joint

scientific article published on 7 December 2017

The sensitivity of cartilage contact pressures in the knee joint to the size and shape of an anatomically shaped meniscal implant.

scientific article published on 26 February 2015

Thin cement mantles surrounding femoral hip implants might not be deleterious in all cases

scientific article published on 18 January 2008

Tibial component with and without stem extension in a trabecular metal cone construct.

scientific article published on 3 September 2016

Toward a method to simulate the process of bone ingrowth in cementless THA using finite element method

scientific article published on 26 November 2012

Toward a more realistic prediction of peri-prosthetic micromotions

scientific article published on 30 December 2011

Paulina is supported by:

About Paulina

Help