Search filters

List of works by Mary Ann B Meador

7-Hydroxynadic Acid: A New End Cap for Improved Oxidation Resistance in Addition Polyimides

scientific article published in August 2001

A mechanistic study of polyimide formation from diester-diacids

scientific article published in August 1987

Abrasion of Candidate Spacesuit Fabrics by Simulated Lunar Dust

scientific article published on 12 July 2009

Addition curing thermosets endcapped with 4-amino [2.2] paracyclophane

scientific article published in December 1991

Aerogel antennas communications study using error vector magnitude measurements

scientific article published in July 2014

ChemInform Abstract: Stereospecific Mono- and Difluorination of the C7-Bridge of Norbornenes

scientific article published in September 2011

Clay reinforced polyimide/silica hybrid aerogel

scientific article published in 2013

Composite Electrolytes for Lithium Batteries: Ionic Liquids in APTES Cross-Linked Polymers

scientific article published in June 2007

Correction to Tailoring Properties of Cross-Linked Polyimide Aerogels for Better Moisture Resistance, Flexibility, and Strength

scientific article published on 24 December 2012

Cross-linking Amine-Modified Silica Aerogels with Epoxies: Mechanically Strong Lightweight Porous Materials

scientific article published in March 2005

Crosslinked polyurea aerogels with controlled porosity

scientific article published in 2015

Crosslinked polyurea- co -polyurethane aerogels with hierarchical structures and low stiffness

scientific article published in May 2018

Dielectric and Other Properties of Polyimide Aerogels Containing Fluorinated Blocks

scientific article published on 31 January 2014

Diels−Alder Trapping of Photochemically Generated Dienes with a Bismaleimide: A New Approach to Polyimide Synthesis

scientific article published in January 1996

Diels−Alder Trapping of Photochemically Generatedo-Quinodimethane Intermediates: An Alternative Route to Photocured Polymer Film Development

scientific article published in May 2005

Effect of Branching on Rod−Coil Block Polyimides as Membrane Materials for Lithium Polymer Batteries

scientific article published in July 2003

Effect of Bulky Substituents in the Polymer Backbone on the Properties of Polyimide Aerogels.

scientific article published on 10 February 2017

Elastic behavior of methyltrimethoxysilane based aerogels reinforced with tri-isocyanate

scientific article published in May 2010

Elastic low density aerogels derived from bis[3-(triethoxysilyl)propyl]disulfide, tetramethylorthosilicate and vinyltrimethoxysilane via a two-step process

scientific article published in 2009

Electrically conducting polymers for aerospace applications

scientific article published on 4 September 1991

Electron Paramagnetic Resonance Imaging of the Spatial Distribution of Free Radicals in PMR-15 Polyimide Resins

scientific article published in December 1997

Elucidation of the Cross-Link Structure of Nadic-End-Capped Polyimides Using NMR of13C-Labeled Polymers

scientific article published in February 1997

Epoxy Reinforced Aerogels Made Using a Streamlined Process

scientific article published on 30 June 2010

Evidence for thermal dehydration occurring in Diels-Alder addition polymers

scientific article published in November 1989

Flexible Nanofiber-Reinforced Aerogel (Xerogel) Synthesis, Manufacture, and Characterization

scientific article published on 23 October 2009

Flexible Polyimide Aerogels with Dodecane Links in the Backbone Structure

scientific article published on 26 June 2020

Flexible, low-density polymer crosslinked silica aerogels

scientific article published in July 2006

Hierarchical Morphology of Poly(ether ether ketone) Aerogels

scientific article published on 16 August 2019

Highly Porous Polymer Aerogel Film-Based Triboelectric Nanogenerators

scientific article published on 18 January 2018

Highly Porous, Rigid-Rod Polyamide Aerogels with Superior Mechanical Properties and Unusually High Thermal Conductivity

scientific article published on 6 January 2017

Improving Elastic Properties of Polymer-Reinforced Aerogels

scientific article published in 2011

Increased Flexibility in Polyimide Aerogels Using Aliphatic Spacers in the Polymer Backbone

scientific article published on 22 February 2019

Investigation of oxidation profile in PMR-15 polyimide using atomic force microscope (AFM)

scientific article published in January 2003

Iptycenes

scientific article published in January 1986

Isocyanate-crosslinked silica aerogel monoliths: preparation and characterization

scientific article published in December 2004

Low Dielectric Polyimide Aerogels As Substrates for Lightweight Patch Antennas

scientific article published on 7 November 2012

Lower temperature curing thermoset polyimides utilizing a substituted norbornene endcap

scientific article published in July 1992

Lunar Dust Effects on Spacesuit Systems: Insights from the Apollo Spacesuits

book published in 2009

Mechanically Strong, Flexible Polyimide Aerogels Cross-Linked with Aromatic Triamine

scientific article published on 10 January 2012

Methylated Tetrahydrophthalic Anhydrides as End Caps in Addition Polyimides

scientific article published on 27 July 2010

Moisture-Resistant Polyimide Aerogels Containing Propylene Oxide Links in the Backbone

scientific article

Morphology of PI–PEO block copolymers for lithium batteries

scientific article published in August 2006

Multiple Substitution Effects and Three-Dimensional Nonlinear Free-Energy Relationships in the Electrochemical Reduction of theN,N‘-Dibenzyl Viologen and the 4-Benzoyl-N-benzylpyridinium Cation

scientific article published in July 2004

Nanostructure-Dependent Marcus-Type Correlation of the Shape Recovery Rate and the Young’s Modulus in Shape Memory Polymer Aerogels

scientific article published on 27 June 2018

New APTES Cross-Linked Polymers from Poly(ethylene oxide)s and Cyanuric Chloride for Lithium Batteries

scientific article published in January 2006

On the Oxidative Degradation of Nadic End-Capped Polyimides. 3. Synthesis and Characterization of Model Compounds for End-Cap Degradation Products

scientific article published in August 1999

On the Oxidative Degradation of Nadic Endcapped Polyimides: I. Effect of Thermocycling on Weight Loss and Crack Formation

scientific article published in September 1996

Optimization of electrically conductive films: Poly(3-methylthiophene) or polypyrrole in Kapton

scientific article published on 14 February 1997

Oxidative Degradation of Nadic-End-Capped Polyimides. 2. Evidence for Reactions Occurring at High Temperatures

scientific article published in June 1997

Photochemical Approaches to Ordered Polymers

scientific article published on 28 December 1990

Poly(maleic anhydride) cross-linked polyimide aerogels: synthesis and properties

scientific article published in 2016

Polyimide Aerogels Cross-Linked through Amine Functionalized Polyoligomeric Silsesquioxane

scientific article published on 4 February 2011

Polyimide Aerogels Using Triisocyanate as Cross-linker

scientific article published on 24 July 2017

Polyimide Aerogels with Amide Cross-Links: A Low Cost Alternative for Mechanically Strong Polymer Aerogels

scientific article published on 7 January 2015

Polyimide Cellulose Nanocrystal Composite Aerogels

scientific article published on 19 February 2016

Polyimide Synthesis

scientific article published in 2015

Polyimide Synthesis

scientific article published in 2014

Polymer reinforced silica aerogels: effects of dimethyldiethoxysilane and bis(trimethoxysilylpropyl)amine as silane precursors

scientific article published in 2013

Preface: Forum on Applications of Hierarchical Polymeric Materials from Nano to Macro

scientific article published on 14 May 2014

Preface: Forum on Polymers for Aerospace Applications

scientific article published on 22 February 2012

Processable, high temperature polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and bis-dienes

scientific article published in October 1988

Processing studies and thermal stability of addition polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and Bis-dienes

scientific article published in February 1992

Quantitative Evaluation of the Hierarchical Porosity in Polyimide Aerogels and Corresponding Solvated Gels

scientific article published on 15 June 2020

Reevaluation of Tetrahydrophthalic Anhydride as an End Cap for Improved Oxidation Resistance in Addition Polyimides

scientific article published in February 2004

Reinforcing polymer cross-linked aerogels with carbon nanofibers

scientific article published in 2008

Reinvestigation of the Photocyclization of 1,4-Phenylenebis[phenylmaleic anhydride]: Preparation and Structure of [5]Helicene 5,6:9,10-Dianhydride

scientific article published in March 1995

Slotted polyimide-aerogel-filled-waveguide arrays

scientific article published in July 2013

Stereospecific mono- and difluorination of the C7-bridge of norbornenes

scientific article published in May 2011

Structure-property relationships in porous 3D nanostructures: epoxy-cross-linked silica aerogels produced using ethanol as the solvent

scientific article published in April 2009

Structure−Property Relationships in Porous 3D Nanostructures as a Function of Preparation Conditions: Isocyanate Cross-Linked Silica Aerogels

scientific article published in May 2007

Substituent effects on the photoisomerization of anthracenes to their 9,10-Dewar isomers

scientific article published in May 1989

Synthesis and Compatibility of Ionic Liquid Containing Rod-Coil Polyimide Gel Electrolytes with Lithium Metal Electrodes

scientific article published in 2008

Synthesis and Properties of Step-Growth Polyamide Aerogels Cross-linked with Triacid Chlorides

scientific article published on 11 July 2014

Synthesis and Thermal Stability of Nitrogen-Containing Blackglas™ Ceramic

Synthesis of heptiptycenes with face-to-face arene rings via a 2,3:6,7-anthradiyne equivalent

Tailoring Properties of Cross-Linked Polyimide Aerogels for Better Moisture Resistance, Flexibility, and Strength

scientific article published on 20 September 2012

Tailoring elastic properties of silica aerogels cross-linked with polystyrene

scientific article published in March 2009

Tailoring mechanical properties of aerogels for aerospace applications.

scientific article published on March 2011

Tetrahydrophthalic Anhydrides as Addition Curing Polyimide End Caps: Thermal Isomerization of Methylendianiline 3,6-Diphenyltetrahydrophthalic Bisimides

scientific article published in February 2005

Thermoresponsive Shape-Memory Aerogels from Thiol–Ene Networks

scientific article published on 28 March 2016

Titania Deposition on PMR-15

scientific article published in June 2005

Toward Improved Optical Transparency of Polyimide Aerogels

scientific article published on 10 February 2020

Triboelectric Nanogenerators Made of Porous Polyamide Nanofiber Mats and Polyimide Aerogel Film: Output Optimization and Performance in Circuits

scientific article published on 16 August 2018

Use of Diels-Alder Cyclopolymerizations in the Photocuring of Polymers

scientific article published in October 2007

β-Cyclodextrin-Derived Monolithic, Hierarchically Porous Polyimides Designed for Versatile Molecular Separation Applications