(S)TEM analysis of the interdiffusion and barrier layer formation in Mn/Cu heterostructures on SiO2for interconnect technologies

3D Visualisation of Crack Distributions in Oxidised Zirconium Alloys by FIB-Slicing

scholarly article by Chris R. M. Grovenor et al published January 2012 in Materials Research Society symposia proceedings

A guide on FIB preparation of samples containing stress corrosion crack tips for TEM and atom-probe analysis.

scientific article published on 23 December 2007

A mechanistic study of the temperature dependence of the stress corrosion crack growth rate in SUS316 stainless steels exposed to PWR primary water

A study of the fcc (FeCo) 23 B 6 phase in fully crystallized Fe-Co-Nb-B-Cu alloys

Achieving 50 nm lateral-resolution quantitative EDX SEM

Achieving sub-nanometre particle mapping with energy-filtered TEM.

scientific article

An atom probe tomography study of the oxide–metal interface of an oxide intrusion ahead of a crack in a polycrystalline Ni-based superalloy

An investigation of the oxidation behaviour of zirconium alloys using isotopic tracers and high resolution SIMS

Analysis of local chemical and structural inhomogeneities in FeySe1−xTex single crystals

Analytical characterisation of oxide dispersion strengthened steels for fusion reactors

Analytical characterization of secondary phases and void distributions in an ultrafine-grained ODS Fe–14Cr model alloy

Atom probe tomography of stress corrosion crack tips in SUS316 stainless steels

Atom probe tomography today

Atom-probe Tomography of Surface Oxides in a 20% Cold Worked Stainless Steel Tested Under PWR Primary Water Conditions

Atom-probe Tomography, Small Angle Neutron Scattering, Transmission Electron Microscopy, Positron Annihilation Spectroscopy and X-ray Absorption Spectroscopy Characterization of Nano-scale Features in Nanostructured Ferritic Alloys

article

Atom-probe tomography characterization of the oxidation of stainless steel

article published in 2010

Atom-probe tomography of surface oxides and oxidized grain boundaries in alloys from nuclear reactors

Characterisation of Co@Fe3O4 core@shell nanoparticles using advanced electron microscopy

scientific article published on 06 March 2013

Characterization of Mesoporosity in Ceria Particles Using Electron Microscopy

scientific article published on 19 November 2010

Comparison of atom probe tomography and transmission electron microscopy analysis of oxide dispersion strengthened steels

article

Comparison of the number densities of nanosized Cu-rich precipitates in ferritic alloys measured using EELS and EDX mapping, HREM and 3DAP

Crystal Structure of the ZrO Phase at Zirconium/Zirconium Oxide Interfaces

scientific article published on 27 June 2014

Determination of the Fe content of embedded Cu-rich particles in ferritic alloys using energy-filtered TEM

scientific article published on 01 July 2005

Determining EDS and EELS partial cross-sections from multiple calibration standards to accurately quantify bi-metallic nanoparticles using STEM

scientific article published on 28 June 2018

Effect of Sn on Corrosion Mechanisms in Advanced Zr-Cladding for Pressurised Water Reactors

Effect of Ti and Cr on dispersion, structure and composition of oxide nano-particles in model ODS alloys

article

Effect of machining on stress corrosion crack initiation in warm-forged type 304L stainless steel in high temperature water

article

Effect of neutron and ion irradiation on the metal matrix and oxide corrosion layer on Zr-1.0Nb cladding alloys

Effects of heavy-ion irradiation on the grain boundary chemistry of an oxide-dispersion strengthened Fe–12wt.% Cr alloy

Effects of single- and simultaneous triple-ion-beam irradiation on an oxide dispersion-strengthened Fe12Cr steel

Enthalpy and Curie temperature relaxation effects in FeSiB–CuNb alloys prepared at different quenching rates

Evidence for deformation-induced transformations of Cu-rich precipitates in an aged FeCu alloy

article

Ex Situ and In Situ Studies of Radiation Damage Mechanisms in Zr-Nb Alloys

scholarly article

Examinations of oxidation and sulfidation of grain boundaries in alloy 600 exposed to simulated pressurized water reactor primary water

scientific article

Extension of the classical theory of crystallization to non-isothermal regimes: Application to nanocrystallization processes

Filled and glycosylated carbon nanotubes for in vivo radioemitter localization and imaging

scientific article published on 16 May 2010

Focussed ion beam sectioning for the 3D characterisation of cracking in oxide scales formed on commercial ZIRLO™ alloys during corrosion in high temperature pressurised water

Grain Boundary Chemistry Before and After Ion Implantation in ODS Steels

High-resolution imaging of complex crack chemistry in reactor steels by NanoSIMS

How oxidized grain boundaries fail

article published in 2013

How the crystallography and nanoscale chemistry of the metal/oxide interface develops during the aqueous oxidation of zirconium cladding alloys

scholarly article by N. Ni et al published December 2012 in Acta Materialia

Identifying suboxide grains at the metal–oxide interface of a corroded Zr–1.0%Nb alloy using (S)TEM, transmission-EBSD and EELS

article

Improving EFTEM data using multivariate statistical analysis

In-situ Fe+ Ion Irradiation of an Oxide Dispersion Strengthened Steel

Individual grain boundary properties and overall performance of metal-organic deposition coated conductors

scholarly article in Physical Review B, vol. 81 no. 17, May 2010

Interdiffusion and barrier layer formation in thermally evaporated Mn/Cu heterostructures on SiO2 substrates

Investigation of grain boundaries for abnormal grain growth in polycrystalline SrTiO3

Irradiation-induced amorphization in the zirconium suboxide on Zr-0.5Nb alloys

scholarly article by Junliang Liu et al published January 2019 in Journal of Nuclear Materials

Low-energy EDX--a novel approach to study stress corrosion cracking in SUS304 stainless steel via scanning electron microscopy

scientific article published on 19 April 2014

Mechanism of the α-Zr to hexagonal-ZrO transformation and its impact on the corrosion performance of nuclear Zr alloys

scholarly article

Mechanisms of Oxidation of Fuel Cladding Alloys Revealed by High Resolution APT, TEM and SIMS Analysis

Metastable Soft Magnetic Materials Produced by Mechanical Alloying: Analysis Using an Equivalent Time Approach

Micromechanical testing of oxidized grain boundaries in Nickel alloys from nuclear reactors

Microstructural Characterization of Irradiation-Induced MnNi-Rich Solute Cluster in Highly Neutron-Irradiated MnNiMo Alloyed Weld Metals

Microstructural characterization by TEM techniques of mechanically alloyed FeNbGe powders

Microstructural characterization of Y2O3 ODS–Fe–Cr model alloys

Microstructural evolution characterization of Fe–Nb–B ternary systems processed by ball milling

Multi-scale characterisation of oxide on zirconium alloys

scholarly article by Na Ni et al published September 2012 in Materials at High Temperatures

Multi-scale characterization of stress corrosion cracking of cold-worked stainless steels and the influence of Cr content

article published in 2009

Multi-scale correlative microscopy investigation of both structure and chemistry of deformation twin bundles in Fe-Mn-C steel.

scientific article

Multiscale, Multiphysics Numerical Modeling of Fusion Welding with Experimental Characterization and Validation

Nano-cluster stability following neutron irradiation in MA957 oxide dispersion strengthened material

Nanocrystallization effects on the specific heat of Fe–Co–Nb–B amorphous alloy

Nanometre-scale evidence for interfacial dissolution-reprecipitation control of silicate glass corrosion

scientific article published on 5 January 2015

Nanoscale characterisation of grain boundary oxidation in cold-worked stainless steels

Novel characterization of stress corrosion cracks

Nuclear reactor materials at the atomic scale

Orientation relationships and interface structure of α′-Cr nanoclusters embedded in α-Fe matrix after α–α′ demixing in neutron irradiated Oxide Dispersion Strengthened material

Overview: recent progress in three-dimensional atom probe instruments and applications

scientific article

Oxide dispersion strengthened Fe–12Cr steel in three dimensions: An electron tomography study

Porosity in oxides on zirconium fuel cladding alloys, and its importance in controlling oxidation rates

scholarly article by N. Ni et al published April 2010 in Scripta Materialia

Preferential Co partitioning to α-Fe in nanocrystalline CoFeNbB alloys by Mn addition

Preparation of site specific transmission electron microscopy plan-view specimens using a focused ion beam system

article

Quantification of a Heterogeneous Ruthenium Catalyst on Carbon-black using ADF Imaging

Quantification of oxide particle composition in model oxide dispersion strengthened steel alloys.

scientific article published on 24 February 2015

Quantitative EELS analysis of zirconium alloy metal/oxide interfaces

scientific article published on 07 November 2010

Quantitative EFTEM measurement of the composition of embedded particles

article

Quantitative Energy-Dispersive X-Ray Analysis of Catalyst Nanoparticles Using a Partial Cross Section Approach

scientific article

Quantitative analysis of carbon in cementite using pulsed laser atom probe

scientific article

Quantitative analysis of core-shell catalyst nanoparticles for industrial applications

Relationship between mechanical amorphization and boron integration during processing of FeNbB alloys

Role of starting phase of boron on the mechanical alloying of FeNbB composition

article

Stability of nanoscale secondary phases in an oxide dispersion strengthened Fe–12Cr alloy

Structural and mechanical properties of γ-irradiated Zr/Nb multilayer nanocomposites

Structural quantification of nanoparticles by HAADF STEM

Structural relaxation in Fe(Co)SiAlGaPCB amorphous alloys

Studies Regarding Corrosion Mechanisms in Zirconium Alloys

TEM characterization of simultaneous triple ion implanted ODS Fe12Cr

The effect of Sn concentration on oxide texture and microstructure formation in zirconium alloys

scholarly article by Alistair Garner et al published October 2015 in Acta Materialia

The role of cold work and applied stress on surface oxidation of 304 stainless steel

Three-dimensional characterization of stress corrosion cracks

article published in 2011

Towards an integrated materials characterization toolbox

Towards quantitative analysis of core-shell catalyst nano-particles by aberration corrected high angle annular dark field STEM and EDX

Transmission electron microscopy of unstained hybrid Au nanoparticles capped with PPAA (plasma-poly-allylamine): Structure and electron irradiation effects

article

Understanding stress corrosion cracking with electron tomography

Understanding surface oxidation in stainless steels through 3D FIB sequential sectioning

Using NanoSIMS to map trace elements in stainless steels from nuclear reactors

article by Sergio Lozano-Perez et al published December 2008 in Applied Surface Science

Using transmission Kikuchi diffraction to study intergranular stress corrosion cracking in type 316 stainless steels

scientific article published on 27 April 2015