List of works by Lorenzo Moroni

3D Fiber-Deposited Electrospun Integrated Scaffolds Enhance Cartilage Tissue Formation

3D fiber deposited polymeric scaffolds for external auditory canal wall

scientific article published on 07 May 2018

3D fiber-deposited scaffolds for tissue engineering: influence of pores geometry and architecture on dynamic mechanical properties

scientific article published in August 2005

3D screening device for the evaluation of cell response to different electrospun microtopographies.

scientific article

3D-Fiber Deposition for Tissue Engineering and Organ Printing Applications

scholarly article published 2010

3D-printed bioactive scaffolds from nanosilicates and PEOT/PBT for bone tissue engineering

scientific article published on 15 December 2018

A Fast Process for Imprinting Micro and Nano Patterns on Electrospun Fiber Meshes at Physiological Temperatures

scholarly article by Anandkumar Nandakumar et al published 27 February 2013 in Small

A Protocol to Enhance INS1E and MIN6 Functionality-The Use of Theophylline

scientific article published on 12 September 2016

A biocomposite of collagen nanofibers and nanohydroxyapatite for bone regeneration

scientific article published on 13 June 2014

A combinatorial approach towards the design of nanofibrous scaffolds for chondrogenesis

scientific article

A microfabricated multi-compartment device for neuron and Schwann cell differentiation

scientific article published on 29 March 2021

A quantitative method to analyse F-actin distribution in cells

scientific article published on 20 October 2019

Acrylic Acid Plasma Coated 3D Scaffolds for Cartilage tissue engineering applications.

scientific article published in March 2018

Actomyosin and the MRTF-SRF pathway downregulate FGFR1 in mesenchymal stromal cells

scientific article published on 16 October 2020

Adapted chondrogenic differentiation of human mesenchymal stem cells via controlled release of TGF-β1 from poly(ethylene oxide)-terephtalate/poly(butylene terepthalate) multiblock scaffolds

scientific article published on 9 April 2014

Additive manufactured polymeric 3D scaffolds with tailored surface topography influence mesenchymal stromal cells activity

scientific article published on 24 May 2016

Additive manufacturing of an elastic poly(ester)urethane for cartilage tissue engineering

scientific article published on 26 November 2019

Amphiphilic beads as depots for sustained drug release integrated into fibrillar scaffolds

scientific article

An antibody based approach for multi-coloring osteogenic and chondrogenic proteins in tissue engineered constructs

An open source image processing method to quantitatively assess tissue growth after non-invasive magnetic resonance imaging in human bone marrow stromal cell seeded 3D polymeric scaffolds

scientific article

Anatomical 3D fiber-deposited scaffolds for tissue engineering: designing a neotrachea

scientific article published in October 2007

Biofabrication of Hepatic Constructs by 3D Bioprinting of a Cell-Laden Thermogel: An Effective Tool to Assess Drug-Induced Hepatotoxic Response

scientific article published on 17 September 2020

Biofabrication strategies for 3D in vitro models and regenerative medicine.

scientific article published on 26 April 2018

Biofabrication: A Guide to Technology and Terminology.

scientific article published on 11 November 2017

Biofabrication: reappraising the definition of an evolving field.

scientific article

Biofunctionalized pectin hydrogels as 3D cellular microenvironments

scientific article published on 04 February 2015

Biological activity of human mesenchymal stromal cells on polymeric electrospun scaffolds

scientific article published on 01 February 2019

Biological and Tribological Assessment of Poly(Ethylene Oxide Terephthalate)/Poly(Butylene Terephthalate), Polycaprolactone, and Poly (L\DL) Lactic Acid Plotted Scaffolds for Skeletal Tissue Regeneration

scientific article published on 25 November 2015

Biomaterials engineered for integration

Biomimetic Architectures for Peripheral Nerve Repair: A Review of Biofabrication Strategies

scientific article published on 19 January 2018

Biophysics of biofabrication

scientific article published in September 2021

Bioprinting Vasculature: Materials, Cells and Emergent Techniques

scientific article published on 23 August 2019

Bioprinting Via a Dual-Gel Bioink Based on Poly(Vinyl Alcohol) and Solubilized Extracellular Matrix towards Cartilage Engineering

scientific article published in 2021

Cationic polymers and their therapeutic potential

scientific article published on 10 August 2012

Cells responding to surface structure of calcium phosphate ceramics for bone regeneration

scientific article published on 8 February 2017

Chitin Nanofibril Application in Tympanic Membrane Scaffolds to Modulate Inflammatory and Immune Response

scientific article published in 2021

Chitosan scaffolds containing hyaluronic acid for cartilage tissue engineering

scientific article published on 25 April 2011

Chitosan/Poly(ɛ-caprolactone) blend scaffolds for cartilage repair

scientific article published on 27 October 2010

Chondrocytes Cocultured with Stromal Vascular Fraction of Adipose Tissue Present More Intense Chondrogenic Characteristics Than with Adipose Stem Cells

scientific article published on 6 January 2016

Combinatorial Approaches to Controlling Cell Behaviour and Tissue Formation in 3D via Rapid-Prototyping and Smart Scaffold Design

scientific article published on 01 July 2009

Combining technologies to create bioactive hybrid scaffolds for bone tissue engineering

scientific article published on January 2013

Comparison of alternative mesenchymal stem cell sources for cell banking and musculoskeletal advanced therapies

scientific article published in 2011

Conductive hydrogel based on chitosan-aniline pentamer/gelatin/agarose significantly promoted motor neuron-like cells differentiation of human olfactory ecto-mesenchymal stem cells

scientific article published on 25 March 2019

Contribution of bone marrow-derived cells to in situ engineered tissue capsules in a rat model of chronic kidney disease

scientific article published on 15 December 2018

Controlled Surface Initiated Polymerization of N-Isopropylacrylamide from Polycaprolactone Substrates for Regulating Cell Attachment and Detachment

article published in 2012

Converge and regenerate

Correction: Biofunctionalized pectin hydrogels as 3D cellular microenvironments

scientific article published on 02 October 2015

Covalent Binding of Bone Morphogenetic Protein-2 and Transforming Growth Factor-β3 to 3D Plotted Scaffolds for Osteochondral Tissue Regeneration

scientific article published on 2 September 2017

Cranioplasty with patient-specific implants in repeatedly reconstructed cases

scientific article published on 14 February 2019

Creeping Proteins in Microporous Structures: Polymer Brush-Assisted Fabrication of 3D Gradients for Tissue Engineering

scientific article published on 13 February 2015

Critical Steps toward a tissue-engineered cartilage implant using embryonic stem cells

scientific article

Critical factors in the design of growth factor releasing scaffolds for cartilage tissue engineering

scientific article published on 01 May 2008

Decellularized Extracellular Matrix Scaffolds for Cartilage Regeneration

scientific article published in January 2015

Degradable amorphous scaffolds with enhanced mechanical properties and homogeneous cell distribution produced by a three-dimensional fiber deposition method

scholarly article by Yang Sun et al published 24 May 2012 in Journal of Biomedical Materials Research Part A

Degradable polymers for tissue engineering

scholarly article published 2008

Design of biphasic polymeric 3-dimensional fiber deposited scaffolds for cartilage tissue engineering applications

scientific article published in February 2007

Development and evaluation of in vivo tissue engineered blood vessels in a porcine model.

scientific article published on 19 October 2015

Development of a biomimetic arch-like 3D bioprinted construct for cartilage regeneration using gelatin methacryloyl and silk fibroin-gelatin bioinks

scientific article published in 2023

Differential response of adult and embryonic mesenchymal progenitor cells to mechanical compression in hydrogels

scientific article published on 16 August 2007

Differentiation capacity and maintenance of differentiated phenotypes of human mesenchymal stromal cells cultured on two distinct types of 3D polymeric scaffolds

scientific article

Direct Writing Electrospinning of Scaffolds with Multidimensional Fiber Architecture for Hierarchical Tissue Engineering

scientific article published on 18 October 2017

Distribution and Viability of Fetal and Adult Human Bone Marrow Stromal Cells in a Biaxial Rotating Vessel Bioreactor after Seeding on Polymeric 3D Additive Manufactured Scaffolds

scientific article

Dynamic Bioinks to Advance Bioprinting

scientific article published on 26 February 2020

Dynamic mechanical properties of 3D fiber-deposited PEOT/PBT scaffolds: an experimental and numerical analysis.

scientific article published in September 2006

Easily synthesized novel biodegradable copolyesters with adjustable properties for biomedical applications

scholarly article by Chiara Gualandi et al published 2012 in Soft Matter

Endothelial differentiation of mesenchymal stromal cells

scientific article

Engineered micro-objects as scaffolding elements in cellular building blocks for bottom-up tissue engineering approaches

scientific article published on 7 January 2014

Enhancement of synthesis of extracellular matrix proteins on retinoic acid loaded electrospun scaffolds

scientific article published on 20 September 2018

Evaluating Osteoarthritic Chondrocytes through a Novel 3-Dimensional In Vitro System for Cartilage Tissue Engineering and Regeneration

scientific article

Evaluation of Cartilage Repair by Mesenchymal Stem Cells Seeded on a PEOT/PBT Scaffold in an Osteochondral Defect.

scientific article published on 15 January 2015

Evaluation of Photocrosslinked Lutrol Hydrogel for Tissue Printing Applications

scientific article published on 15 May 2009

Extracellular matrix and tissue engineering applications

article

Fabrication of a self-assembled honeycomb nanofibrous scaffold to guide endothelial morphogenesis

scientific article published on 04 June 2020

Fabrication of bioactive composite scaffolds by electrospinning for bone regeneration

scientific article published on November 2010

Fabrication of multi-well chips for spheroid cultures and implantable constructs through rapid prototyping techniques.

scientific article published on 10 March 2015

Fabrication of nanofibrous scaffolds for tissue engineering applications

article

Fabrication of three-dimensional bioplotted hydrogel scaffolds for islets of Langerhans transplantation.

scientific article published on 28 May 2015

Fabrication, characterization and cellular compatibility of poly(hydroxy alkanoate) composite nanofibrous scaffolds for nerve tissue engineering

scientific article

Feeling the life

Fiber diameter and texture of electrospun PEOT/PBT scaffolds influence human mesenchymal stem cell proliferation and morphology, and the release of incorporated compounds

scientific article published on 9 June 2006

Fiber diameter, porosity and functional group gradients in electrospun scaffolds

scientific article published on 28 February 2020

Flexible Yttrium-Stabilized Zirconia Nanofibers Offer Bioactive Cues for Osteogenic Differentiation of Human Mesenchymal Stromal Cells.

scientific article

From fiber curls to mesh waves: a platform for the fabrication of hierarchically structured nanofibers mimicking natural tissue formation

scientific article published on 01 August 2019

Fundamentals of light-cell-polymer interactions in photo-cross-linking based bioprinting

scientific article published on 12 October 2020

Geometric constraints of endothelial cell migration on electrospun fibres.

scientific article published on 23 April 2018

Glucose gradients influence zonal matrix deposition in 3D cartilage constructs

scientific article published on December 2014

Glycosaminoglycan functionalization of electrospun scaffolds enhances Schwann cell activity

scientific article published on 29 June 2019

Gradients in pore size enhance the osteogenic differentiation of human mesenchymal stromal cells in three-dimensional scaffolds

scientific article published on 10 March 2016

High Throughput Screening with Biofabrication Platforms

High content imaging in the screening of biomaterial-induced MSC behavior.

scientific article published on 23 November 2012

Human mesenchymal stem cells: a bank perspective on the isolation, characterization and potential of alternative sources for the regeneration of musculoskeletal tissues

scientific article

Hybrid Polycaprolactone/Alginate Scaffolds Functionalized with VEGF to Promote de Novo Vessel Formation for the Transplantation of Islets of Langerhans.

scientific article published on 26 April 2016

Hybrid Polyester-Hydrogel Electrospun Scaffolds for Tissue Engineering Applications

scientific article published on 25 September 2019

Hybrid and Composite Scaffolds Based on Extracellular Matrices for Cartilage Tissue Engineering

scientific article published on 01 June 2019

Hydrogels that listen to cells: a review of cell-responsive strategies in biomaterial design for tissue regeneration

Improving cell distribution on 3D additive manufactured scaffolds through engineered seeding media density and viscosity

scientific article published on 13 November 2019

In Situ Covalent Reinforcement of a Benzene‐1,3,5‐Tricarboxamide Supramolecular Polymer Enables Biomimetic, Tough, and Fibrous Hydrogels and Bioinks

scientific article published in 2023

In vivo screening of extracellular matrix components produced under multiple experimental conditions implanted in one animal

scientific article published on 01 June 2013

Incorporation of nanostructured hydroxyapatite and poly(N-isopropylacrylamide) in demineralized bone matrix enhances osteoblast and human mesenchymal stem cell activity

Increased cell seeding efficiency in bioplotted three-dimensional PEOT/PBT scaffolds

scientific article published on 8 November 2013

Influence of Additive Manufactured Scaffold Architecture on the Distribution of Surface Strains and Fluid Flow Shear Stresses and Expected Osteochondral Cell Differentiation

scientific article

Influence of PCL molecular weight on mesenchymal stromal cell differentiation

scholarly article in RSC Advances, vol. 5 no. 67, 2015

Influence of Solution Properties and Process Parameters on the Formation and Morphology of YSZ and NiO Ceramic Nanofibers by Electrospinning

scientific article published on 13 January 2017

Influence of internal pore architecture on biological and mechanical properties of three-dimensional fiber deposited scaffolds for bone regeneration.

scientific article published on 8 January 2016

Influence of the nanofiber chemistry and orientation of biodegradable poly(butylene succinate)-based scaffolds on osteoblast differentiation for bone tissue regeneration.

scientific article published on 27 April 2018

Influence of the solvent type on the morphology and mechanical properties of electrospun PLLA yarns

scientific article published on 14 August 2013

Influencing chondrogenic differentiation of human mesenchymal stromal cells in scaffolds displaying a structural gradient in pore size.

scientific article published on 8 March 2016

Integrating novel technologies to fabricate smart scaffolds.

scientific article published on January 2008

Integration of hollow fiber membranes improves nutrient supply in three-dimensional tissue constructs.

scientific article published on 14 June 2011

Interfacing polymeric scaffolds with primary pancreatic ductal adenocarcinoma cells to develop 3D cancer models

scientific article published on January 2014

Intra-articular delivery of glucosamine for treatment of experimental osteoarthritis created by a medial meniscectomy in a rat model.

scientific article published on 5 November 2013

Janus 3D printed dynamic scaffolds for nanovibration-driven bone regeneration

scientific article published on 15 February 2021

Lab-on-a-brane for spheroid formation

scientific article published on 28 March 2019

Label-free Raman monitoring of extracellular matrix formation in three-dimensional polymeric scaffolds

scientific article published on 03 July 2013

Layer-by-layer tissue microfabrication supports cell proliferation in vitro and in vivo

scientific article

Layered PEGDA hydrogel for islet of Langerhans encapsulation and improvement of vascularization

scientific article published on 18 November 2017

Mechanosensitive regulation of stanniocalcin-1 by zyxin and actin-myosin in human mesenchymal stromal cells

scientific article published on 07 May 2020

Mesenchymal stromal cell-derived extracellular matrix influences gene expression of chondrocytes

scientific article published on 27 February 2013

Methods of Monitoring Cell Fate and Tissue Growth in Three-Dimensional Scaffold-Based Strategies for In Vitro Tissue Engineering

scientific article published on 29 January 2016

Micro-fabricated scaffolds lead to efficient remission of diabetes in mice.

scientific article

Micropatterned hot-embossed polymeric surfaces influence cell proliferation and alignment

scientific article

Microwell scaffolds for the extrahepatic transplantation of islets of Langerhans

scientific article

Mimicking natural cell environments: design, fabrication and application of bio-chemical gradients on polymeric biomaterial substrates

scientific article published on 06 June 2016

Modeling mechanical signals on the surface of µCT and CAD based rapid prototype scaffold models to predict (early stage) tissue development.

scientific article

Mold-Based Application of Laser-Induced Periodic Surface Structures (LIPSS) on Biomaterials for Nanoscale Patterning

scientific article published on 3 September 2015

Monolithic and assembled polymer-ceramic composites for bone regeneration

scientific article published on 7 November 2012

Multiscale fabrication of biomimetic scaffolds for tympanic membrane tissue engineering.

scientific article published on 7 May 2015

Multivalency Enables Dynamic Supramolecular Host-Guest Hydrogel Formation

scientific article published on 03 April 2020

Multiwell three-dimensional systems enable in vivo screening of immune reactions to biomaterials: a new strategy toward translational biomaterial research

scientific article published on 24 May 2019

Myoblast differentiation of human mesenchymal stem cells on graphene oxide and electrospun graphene oxide-polymer composite fibrous meshes: importance of graphene oxide conductivity and dielectric constant on their biocompatibility

article published in 2015

Nanoroughness, Surface Chemistry and Drug Delivery Control by Atmospheric Plasma Jet on Implantable Devices

article by Alessandro Patelli et al published 25 October 2018 in ACS Applied Materials and Interfaces

Osteochondral Regeneration: Tuning Cell Differentiation into a 3D Scaffold Presenting a Pore Shape Gradient for Osteochondral Regeneration (Adv. Healthcare Mater. 14/2016).

scientific article published in July 2016

PEOT/PBT Guides Enhance Nerve Regeneration in Long Gap Defects

scientific article published on 14 December 2016

Patterning Vasculature: The Role of Biofabrication to Achieve an Integrated Multicellular Ecosystem

Peptide functionalized polyhydroxyalkanoate nanofibrous scaffolds enhance Schwann cells activity

scientific article published on 02 May 2014

Plug and play: combining materials and technologies to improve bone regenerative strategies

scientific article published on 14 May 2013

Poly(N-isopropylacrylamide)–poly(ferrocenylsilane) dual-responsive hydrogels: synthesis, characterization and antimicrobial applications

Poly(amido amine)-based multilayered thin films on 2D and 3D supports for surface-mediated cell transfection.

scientific article published on 28 January 2015

Poly(caprolactone-co-trimethylenecarbonate) urethane acrylate resins for digital light processing of bioresorbable tissue engineering implants

scientific article published on 01 November 2019

Polymer brush coatings regulating cell behavior: passive interfaces turn into active

scientific article published on 04 March 2014

Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness

scientific article published on 28 August 2006

Primary chondrocytes enhance cartilage tissue formation upon co-culture with a range of cell types

article

Promoting Tropoelastin Expression in Arterial and Venous Vascular Smooth Muscle Cells and Fibroblasts for Vascular Tissue Engineering.

scientific article published on 7 September 2016

Regenerating articular tissue by converging technologies

scientific article

SCREENED: A Multistage Model of Thyroid Gland Function for Screening Endocrine-Disrupting Chemicals in a Biologically Sex-Specific Manner ⬇️

scientific article published on 21 May 2020

Scaffold-free and label-free biofabrication technology using levitational assembly in high magnetic field

scientific article published on 12 February 2020

Schwann cells promote endothelial cell migration

scientific article

Self-assembly of electrospun nanofibers into gradient honeycomb structures

Soft-molecular imprinted electrospun scaffolds to mimic specific biological tissues

scientific article published on 20 August 2018

Spatiotemporal proliferation of human stromal cells adjusts to nutrient availability and leads to stanniocalcin-1 expression in vitro and in vivo

scientific article published on 15 May 2015

Stability and Cell Adhesion Properties of Poly(N-isopropylacrylamide) Brushes with Variable Grafting Densities

Stem-Cell Clinging by a Thread: AFM Measure of Polymer-Brush Lateral Deformation

Strategies to Improve Nanofibrous Scaffolds for Vascular Tissue Engineering

scientific article published on 05 May 2020

Supporting data of spatiotemporal proliferation of human stromal cells adjusts to nutrient availability and leads to stanniocalcin-1 expression in vitro and in vivo

scientific article

Surface energy and stiffness discrete gradients in additive manufactured scaffolds for osteochondral regeneration

scientific article

Surface modification of electrospun fibre meshes by oxygen plasma for bone regeneration

scientific article published on 11 December 2012

Surface modifications by gas plasma control osteogenic differentiation of MC3T3-E1 cells

scientific article

Sustained delivery of growth factors with high loading efficiency in a layer by layer assembly

scientific article published on 12 November 2019

Tailorable Surface Morphology of 3D Scaffolds by Combining Additive Manufacturing with Thermally Induced Phase Separation

scientific article published on 3 July 2017

Tailoring chemical and physical properties of fibrous scaffolds from block copolyesters containing ether and thio-ether linkages for skeletal differentiation of human mesenchymal stromal cells

scientific article

Tailoring surface nanoroughness of electrospun scaffolds for skeletal tissue engineering.

scientific article published on 6 July 2017

Tailoring the foreign body response for in situ vascular tissue engineering.

scientific article

Tandem electrospinning for heterogeneous nanofiber patterns

scientific article published on 13 February 2020

The Use of Finite Element Analyses to Design and Fabricate Three-Dimensional Scaffolds for Skeletal Tissue Engineering

scientific article published on 17 May 2017

The effect of scaffold-cell entrapment capacity and physico-chemical properties on cartilage regeneration

scientific article

The influence of process parameters on the properties of electrospun PLLA yarns studied by the response surface methodology

article

The osteochondral interface as a gradient tissue: from development to the fabrication of gradient scaffolds for regenerative medicine

scientific article published on 16 March 2015

The physics of tissue formation with mesenchymal stem cells

scientific article published on 07 September 2012

Thin polymer brush decouples biomaterial's micro-/nanotopology and stem cell adhesion

scientific article

Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting

scientific article published on 06 July 2018

Three-dimensional fiber-deposited PEOT/PBT copolymer scaffolds for tissue engineering: influence of porosity, molecular network mesh size, and swelling in aqueous media on dynamic mechanical properties

scientific article published in December 2005

Tissue Engineering

scholarly article published 2014

Tissue engineering of the tympanic membrane using electrospun PEOT/PBT copolymer scaffolds: A morphological in vitro study

article

Tissue engineering – an introduction

article

Topography of calcium phosphate ceramics regulates primary cilia length and TGF receptor recruitment associated with osteogenesis.

scientific article

Toward mimicking the bone structure: design of novel hierarchical scaffolds with a tailored radial porosity gradient

scientific article published on 11 October 2016

Towards 4D printed scaffolds for tissue engineering: exploiting 3D shape memory polymers to deliver time-controlled stimulus on cultured cells.

scientific article published on 20 July 2017

Towards an in vitro model mimicking the foreign body response: tailoring the surface properties of biomaterials to modulate extracellular matrix

scientific article published on 19 September 2014

Trends in Double Networks as Bioprintable and Injectable Hydrogel Scaffolds for Tissue Regeneration

scientific article published in 2021

Triphasic scaffolds for the regeneration of the bone-ligament interface.

scientific article published on 29 January 2016

Tuning Cell Differentiation into a 3D Scaffold Presenting a Pore Shape Gradient for Osteochondral Regeneration.

scientific article

Tuning Hydrogels by Mixing Dynamic Cross‐Linkers: Enabling Cell‐Instructive Hydrogels and Advanced Bioinks

scientific article published in 2021

Ultraviolet Functionalization of Electrospun Scaffolds to Activate Fibrous Runways for Targeting Cell Adhesion

scientific article published on 26 June 2019

Upscaling of high-throughput material platforms in two and three dimensions

Utilizing the Foreign Body Response to Grow Tissue Engineered Blood Vessels in Vivo.

scientific article

Viscoelastic Oxidized Alginates with Reversible Imine Type Crosslinks: Self-Healing, Injectable, and Bioprintable Hydrogels

scientific article published on 21 November 2018

What can biofabrication do for space and what can space do for biofabrication?

scientific article published in 2022

Paulina is supported by:

About Paulina

Help