A Fourier Transform Infrared (FTIR) Study of the Reaction of Triethoxysilane (TES) and Bis[3-triethoxysilylpropyl]tetrasulfane (TESPT) with the Surface of Amorphous Silica

A Green Approach for Preparing High-Loaded Sepiolite/Polymer Biocomposites

scientific article published on 31 December 2018

A New Modifier for Silica in Reinforcing SBR Elastomers for the Tyre Industry

A Possible Means to Assist the Processing of PET, PTT and PBT

A novel tin-based imidazolium-modified montmorillonite catalyst for the preparation of poly(butylene terephthalate)-based nanocomposites using in situ entropically-driven ring-opening polymerization

scholarly article in RSC Advances, vol. 5 no. 8, 2015

Alternative synthetic routes for the preparation of PLA∕montmorillonite nanocomposites

An Introduction to Entropically-driven Ring-opening Polymerizations

Aqueous-based immobilization of initiator and surface-initiated ATRP to construct hemocompatible surface of poly (styrene-b-(ethylene-co-butylene)-b-styrene) elastomer

scientific article published on 21 June 2013

Biobased Cryogels from Enzymatically Oxidized Starch: Functionalized Materials as Carriers of Active Molecules

scientific article published on 31 May 2020

Biobased Janus molecule for the facile preparation of water solutions of few layer graphene sheets

scholarly article in RSC Advances, vol. 5 no. 99, 2015

Biodegradable polyester-based eco-composites containing hemp fibers modified with macrocyclic oligomers

scholarly article published 2016

CHAPTER 23. Microscopy of Natural Rubber Composites and Nanocomposites

Carbon Papers and Aerogels Based on Graphene Layers and Chitosan: Direct Preparation from High Surface Area Graphite

scientific article published on 13 November 2017

Chemistry of Interfacial Interactions in a LDPE-Based Nanocomposite and Their Effect on the Nanoscale Hybrid Assembling

Comparative study about preparation of poly(lactide)/Organophilic montmorillonites nanocomposites through melt blending or ring opening polymerization methods

Composites based on polypropylene and short wool fibres

Correlating the morphology of poly(L-lactide)/poly(butylene succinate)/graphene oxide blends nanocomposites with their crystallization behavior

Delamination of organically modified montmorillonite for reducing the filler networking with carbon black in poly(1,4-cis-isoprene) based nanocomposites

Dependence of surface properties of silylated silica on the length of silane arms

Dynamic and viscoelastic behavior of natural rubber/layered silicate nanocomposites obtained by melt blending

scholarly article in Polymer Engineering and Science, vol. 47 no. 10, 2007

Edge Functionalized Graphene Layers for (Ultra) High Exfoliation in Carbon Papers and Aerogels in the Presence of Chitosan

scientific article published on 20 December 2019

Enhancement of mechanical reinforcement due to hybrid filler networking promoted by an organoclay in hydrocarbon-based nanocomposites

Exfoliated/Intercalated Rubber/Organo-Montmorillonite Nanocomposites: Preparation and Characterization

FILLER NETWORKING OF A NANOGRAPHITE WITH A HIGH SHAPE ANISOTROPY AND SYNERGISM WITH CARBON BLACK IN POLY(1,4-CIS-ISOPRENE)–BASED NANOCOMPOSITES

Flow induced crystallization of LDPE nanocomposites: A rheological and morphological characterization

Formation of clay intercalates with organic bilayers in hydrocarbon polymers

Functionalization of Multiwalled Carbon Nanotubes with Cyclic Nitrones for Materials and Composites: Addressing the Role of CNT Sidewall Defects

article published in 2011

Graphene Layers Functionalized with A Janus Pyrrole-Based Compound in Natural Rubber Nanocomposites with Improved Ultimate and Fracture Properties

scientific article published on 18 April 2020

High throughput synthesis of polyesters using entropically driven ring-opening polymerizations

scientific article

Highly thermostable and crystalline poly(butylene adipate) bionanocomposites prepared by in situ polycondensation with organically modified Moroccan beidellite clay

Hybrid Coatings Containing Silver Nanoparticles Generated In situ in a Thiol-Ene Photocurable System

Hybrid SiO2@POSS nanofiller: a promising reinforcing system for rubber nanocomposites

Hybrid organic–inorganic silicate/thiol–ene photocured coatings

article

Hydrophobation of silica surface by silylation with new organo-silanes bearing a polybutadiene oligomer tail

IN SITU RHEO-SALS EXPERIMENTS ON LDPE NANOCOMPOSITES: A PRELIMINARY STUDY

Influence of the Silane Modifiers on the Surface Thermodynamic Characteristics and Dispersion of the Silica into Elastomer Compounds

scientific article published on 10 April 2007

Innovative Mesoporous Nanosilicas: SBR Nanocomposite for Low Environmental Impact Tread Tyre

scientific article published in February 2018

Innovative films with tunable permeability for fresh vegetable packaging applications

Interactive effects between carbon allotrope fillers on the mechanical reinforcement of polyisoprene based nanocomposites

Long-lived layered silicates-immobilized 2,6-bis(imino)pyridyl iron (II) catalysts for hybrid polyethylene nanocomposites byin situpolymerization: Effect of aryl ligand and silicate modification

Macrocyclic oligomers as compatibilizing agent for hemp fibres/biodegradable polyester eco-composites

scholarly article by Lucia Conzatti et al published June 2018 in Polymer

Mechanical Reinforcement in a Polyisoprene Rubber by Hybrid Nanofillers

Morphology and Viscoelastic Behaviour of a Silica Filled Styrene/Butadiene Random Copolymer

Morphology development and stability of polypropylene/organoclay nanocomposites

scientific article published on September 2010

Nanocomposites of Poly(1,4-cis-Isoprene) with Graphite Oxide Intercalation Compounds

Nanopositioning for polarimetric characterization

Nanoscale structure and morphology of thin films of poly(2-chloroxylylene) synthesized by the CVD method on different liquids

New fluorinated montmorillonites for the preparation of UV-cured coatings.

scientific article

New functionalized polypropylenes as controlled architecture compatibilizers for polypropylene layered silicates nanocomposites

scientific article published in August 2009

ON THE CYCLO-DEPOLYMERIZATION OF ALKYL AROMATIC POLYESTERS AND THE IN SITU POLYMERIZATION OF THE CYCLIC OLIGOMERS PRODUCED

Optimization of organo-layered double hydroxide dispersion in LDPE-based nanocomposites

Optimization of the sealing performance in transient conditions of rubber based hybrid nanocomposites by carbon nanotubes, as assessed by a tailored recovery test

Oxygen and water vapor barrier properties of MMT nanocomposites from low density polyethylene or EPM with grafted succinic groups

scientific article

PVDF/BaTiO3 composites as dielectric materials: Influence of processing on properties

Plasticized and nanofilled poly(lactic acid)-based cast films: Effect of plasticizer and organoclay on processability and final properties

Polyacetylenes Bearing Mesogenic Side Groups: Synthesis and Properties, 2

Polyacetylenes bearing mesogenic side groups: synthesis and properties. Part 3. Influence of flexible spacer length and tail functionality

Polyester-based biocomposites containing wool fibres

Polyether from a biobased Janus molecule as surfactant for carbon nanotubes

Polyurethane-based biomaterials for shape-adjustable cardiovascular devices

Probing the chain segment mobility at the interface of semi-crystalline polylactide/clay nanocomposites

article

Reduction of filler networking in silica based elastomeric nanocomposites with exfoliated organo-montmorillonite

Reinforcement of diene elastomers by organically modified layered silicates

Shape controlled spherical (0D) and rod-like (1D) silica nanoparticles in silica/styrene butadiene rubber nanocomposites: Role of the particle morphology on the filler reinforcing effect

Size-controlled self-assembly of anisotropic sepiolite fibers in rubber nanocomposites

Study of the compounding process parameters for morphology control of LDPE/layered silicate nanocomposites

Supramolecular interactions of carbon nanotubes with biosourced polyurethanes from 2-(2,5-dimethyl-1H-pyrrol-1-yl)-1,3-propanediol

Surface modification of silica: 1. Thermodynamic aspects and effect on elastomer reinforcement

Syntheses of random PET-co-PTTs and some related copolyesters by entropically-driven ring-opening polymerizations and by melt blending: Thermal properties and crystallinity

The Effect of the Surface Area of Carbon Black Grades on HNBR in Harsh Environments

scientific article published on 04 January 2019

The Role of CNTs in Promoting Hybrid Filler Networking and Synergism with Carbon Black in the Mechanical Behavior of Filled Polyisoprene

The clay mineral modifier as the key to steer the properties of rubber nanocomposites

The effect of layered double hydroxides dispersion on thermal and mechanical properties of poly(vinyl chloride)/poly(methyl methacrylate) blends

The nanostructured morphology of linear polyurethanes observed by transmission electron microscopy

article

The origin of synergism between an organoclay and carbon black

The role of silica in radiation induced grafting and crosslinking of silica/elastomers blends

Wool fibres functionalised with a silane-based coupling agent for reinforced polypropylene composites

article published in 2014

γ-Radiation Induced Functional Modification of Silica and Radiation Vulcanization of SBR-Silica Composites