Search filters

List of works by Richard Hall

A biomechanical investigation of vertebroplasty in osteoporotic compression fractures and in prophylactic vertebral reinforcement

scientific article published in August 2007

A dynamic study of thoracolumbar burst fractures

scientific article published in November 2003

A novel method for isolation and recovery of ceramic nanoparticles and metal wear debris from serum lubricants at ultra-low wear rates. ⬇️

scientific article published on 6 July 2016

A pilot study of scoliosis assessment using radiation free surface topography in children with GMFCS IV and V cerebral palsy

scientific article published on 9 August 2011

Assessing cement injection behaviour in cancellous bone: an in vitro study using flow models ⬇️

scientific article published on 9 June 2014

Assessment of a three-dimensional measurement technique for the porosity evaluation of PMMA bone cement

scientific article published in June 2006

Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells ⬇️

scientific article published on 31 January 2013

Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study ⬇️

scientific article published on 30 June 2015

Concentration and size distribution data of silicon nitride nanoparticles measured using nanoparticle tracking analysis ⬇️

scientific article published on 15 September 2017

Cross-shear implementation in sliding-distance-coupled finite element analysis of wear in metal-on-polyethylene total joint arthroplasty: intervertebral total disc replacement as an illustrative application

scientific article published on June 2010

Determination of the trabecular bone direction from digitised radiographs

scientific article

Development of specimen-specific finite element models of human vertebrae for the analysis of vertebroplasty

scientific article

Differences in the rates of penetration determined from radiographic and shadowgraphic measurements of acetabular sockets

scientific article published on 01 August 1998

Discrepancy between penetration depths derived from radiographic and direct measurement of acetabular components.

scientific article published in January 1998

Dissolution behaviour of silicon nitride coatings for joint replacements ⬇️

scientific article published on 22 January 2016

Do chronic medical conditions increase the risk of eating disorder? A cross-sectional investigation of eating pathology in adolescent females with scoliosis and diabetes

scientific article published on 3 December 2007

Dynamics of interpedicular widening in spinal burst fractures: an in vitro investigation ⬇️

scientific article published on 6 February 2014

Evaluation of the mechanical and architectural properties of glenoid bone

scientific article published on 4 February 2008

Fluoroscopic assessment of lumbar total disc replacement kinematics during walking ⬇️

scientific article published on April 2015

Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses ⬇️

Friction in hip prostheses ⬇️

scientific article published on August 1, 1997

Health impacts of pedestrian head-loading: a review of the evidence with particular reference to women and children in sub-Saharan Africa

scientific article published on 17 April 2013

Identification and optimisation of a novel series of pyrimidine based cyclooxygenase-2 (COX-2) inhibitors. Utilisation of a biotransformation approach.

scientific article

Interaction of micron and nano-sized particles with cells of the dura mater ⬇️

scientific article

Mathematical model for the viscoelastic properties of dura mater

scientific article

Measurement of canal occlusion during the thoracolumbar burst fracture process

scientific article published in March 2002

Nanocrystalline hydroxyapatite intervertebral cages induce fusion after anterior cervical discectomy and may be a safe alternative to PEEK or carbon fiber intervertebral cages

scientific article

Novel methodology for assessing biomaterial-biofluid interaction in cancellous bone ⬇️

scientific article published on 6 March 2015

Observations on the direction of wear in Charnley sockets retrieved at revision

article

Poisson's ratio and strain rate dependency of the constitutive behavior of spinal dura mater

scientific article published on 20 January 2010

Potential of real-time measurement of GFP-fusion proteins.

scientific article published in April 2004

Preferential superior surface motion in wear simulations of the Charité total disc replacement

scientific article published on 26 June 2010

Preliminary biomechanical evaluation of prophylactic vertebral reinforcement adjacent to vertebroplasty under cyclic loading

scientific article published on 21 July 2008

Prevalence of impingement in explanted Charnley acetabular components.

scientific article published on January 1998

Radiographic measurement of wear in total hip arthroplasty

Recovery of low volumes of wear debris from rat stifle joint tissues using a novel particle isolation method. ⬇️

scientific article published on 2 March 2018

Spinal cord-fragment interactions following burst fracture: an in vitro model

scientific article published in September 2006

Stem fixation in the Charnley low-friction arthroplasty in young patients using an intramedullary bone block

scientific article published in March 1998

The accuracy and precision of a micro computer tomography volumetric measurement technique for the analysis of in-vitro tested total disc replacements

scientific article published in April 2009

The association between rates of wear in retrieved acetabular components and the radius of the femoral head

scientific article published on 01 January 1998

The biomechanical effectiveness of prophylactic vertebroplasty: a dynamic cadaveric study

scientific article published in May 2008

The biomechanical response of spinal cord tissue to uniaxial loading

scientific article published in May 2006

The biomechanics of vertebroplasty in multiple myeloma and metastatic bladder cancer: a preliminary cadaveric investigation

scientific article published in November 2008

The effect of anterior-posterior shear load on the wear of ProDisc-L TDR

scientific article

The effect of anterior-posterior shear on the wear of CHARITÉ total disc replacement

scientific article published in April 2012

The effect of bone fragment size and cerebrospinal fluid on spinal cord deformation during trauma: an ex vivo study

scientific article published in April 2009

The effect of cerebrospinal fluid on the biomechanics of spinal cord: an ex vivo bovine model using bovine and physical surrogate spinal cord

scientific article published in August 2008

The effect of cerebrospinal fluid thickness on traumatic spinal cord deformation

scientific article published on 2 June 2011

The effect of socket design, materials and liner thickness on the wear of the porous coated anatomic total hip replacement

scientific article published on 01 January 2001

The effect of surface topography of retrieved femoral heads on the wear of UHMWPE sockets ⬇️

scientific article published on December 1, 1997

The frictional behaviour of explanted PCA hip prostheses

scientific article published on 01 January 1998

The importance of fluid-structure interaction in spinal trauma models

scientific article

The influence of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene sockets in cementless total hip replacement

scientific article published in January 1999

Validation of a digital image processing software package for the in vivo measurement of wear in cemented Charnley total hip arthroplasties

scientific article published on 24 August 2005

Vertebroplasty: Patient and treatment variations studied through parametric computational models ⬇️

scientific article published on 27 July 2013

Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters

Wear and biological effects of a semi-constrained total disc replacement subject to modified ISO standard test conditions. ⬇️

scientific article published on 19 December 2014

Wear characteristics of an unconstrained lumbar total disc replacement under a range of in vitro test conditions ⬇️

scientific article published on 28 September 2015

Wear in retrieved acetabular components

scientific article published on 01 April 1998

Wear simulation of a polyethylene-on-metal cervical total disc replacement under different concentrations of bovine serum lubricant. ⬇️

scientific article published in May 2016

Paulina is supported by:

About Paulina

Help