Search filters

List of works by Wirley Gonçalves Assunção

A comparison of profilometer and AutoCAD software techniques in evaluation of implant angulation in vitro.

scientific article published in July 2008

Accuracy of impression techniques for implants. Part 1--Influence of transfer copings surface abrasion.

scientific article published in December 2008

Accuracy of impression techniques for implants. Part 2 - comparison of splinting techniques

scientific article published on 13 October 2008

An implant-transfer technique without impression material

scientific article published on 01 July 2010

Authorship, collaboration, and funding trends in implantology literature: analysis of five journals from 2005 to 2009.

scientific article published in February 2011

Biomechanical evaluation of internal and external hexagon platform switched implant-abutment connections: An in vitro laboratory and three-dimensional finite element analysis

scientific article published on 08 June 2012

Bone augmentation and autogenous transplantation of premolar to the site of the fissure in a cleft palate patient

scientific article published on 12 July 2012

Characterization of chemically treated Ti-Zr system alloys for dental implant application

scientific article published on 19 July 2018

Color degradation of acrylic resin denture teeth as a function of liquid diet: ultraviolet-visible reflection analysis

scientific article published on 01 October 2013

Comparing the efficacy of mandibular implant-retained overdentures and conventional dentures among elderly edentulous patients: satisfaction and quality of life.

scientific article published in December 2007

Comparison between complete denture and implant-retained overdenture: effect of different mucosa thickness and resiliency on stress distribution

scientific article published on 01 December 2008

Comparison of different designs of implant-retained overdentures and fixed full-arch implant-supported prosthesis on stress distribution in edentulous mandible--a computed tomography-based three-dimensional finite element analysis

scientific article published on 19 March 2013

Comparison of single-standing or connected implants on stress distribution in bone of mandibular overdentures: a two-dimensional finite element analysis

scientific article published on 01 May 2010

Comparison of stress distribution between complete denture and implant-retained overdenture-2D FEA.

scientific article published on 9 May 2008

Corrosion kinetics and topography analysis of Ti-6Al-4V alloy subjected to different mouthwash solutions.

scientific article published on 8 July 2014

Cortical bone stress distribution in mandibles with different configurations restored with prefabricated bar-prosthesis protocol: a three-dimensional finite-element analysis

scientific article published on 18 November 2010

Do Irrigation Solutions Influence the Bond Interface Between Glass Fiber Posts and Dentin?

scientific article published on 01 March 2019

Effect of Disinfection on the Bond Strength between Denture Teeth and Microwave-Cured Acrylic Resin Denture Base

scientific article

Effect of bleaching agents and soft drink on titanium surface topography

scientific article published in 2013

Effect of different mucosa thickness and resiliency on stress distribution of implant-retained overdentures-2D FEA.

scientific article published in November 2008

Effect of flasking and polymerization techniques on tooth movement in complete denture processing

scientific article published on 02 February 2009

Effect of metal-ceramic or all-ceramic superstructure materials on stress distribution in a single implant-supported prosthesis: three-dimensional finite element analysis

scientific article published on 01 November 2011

Effect of occlusal splint treatment on the temperature of different muscles in patients with TMD.

scientific article published on 29 June 2010

Effect of passive fit absence in the prosthesis/implant/retaining screw system: a two-dimensional finite element analysis

scientific article published on 01 November 2009

Effect of polymerization methods and thermal cycling on color stability of acrylic resin denture teeth.

scientific article published in December 2009

Effect of storage in artificial saliva and thermal cycling on Knoop hardness of resin denture teeth.

scientific article published on 17 January 2010

Effect of superstructure materials and misfit on stress distribution in a single implant-supported prosthesis: a finite element analysis

scientific article published on 01 May 2010

Effect of unilateral misfit on preload of retention screws of implant-supported prostheses submitted to mechanical cycling.

scientific article published on 8 June 2010

Effect of whitening and desensitizing dentifrices on composite surfaces treated with surface sealants

scientific article published on 17 October 2012

Effects of dextrose and lipopolysaccharide on the corrosion behavior of a Ti-6Al-4V alloy with a smooth surface or treated with double-acid-etching.

scientific article

Efficacy of Sealing Agents on Preload Maintenance of Screw-Retained Implant-Supported Prostheses.

scientific article published on 22 September 2017

Emergence profile customization technique during implant transfer

scientific article published on 01 April 2019

Epidemiological Data and Survival Rate of Removable Partial Dentures

scientific article

Evaluation of a two-step pouring technique for implant-supported prostheses impression

scientific article published on 01 January 2010

Evaluation of impression accuracy for implant at various angulations

scientific article published in April 2010

Evaluation of the effect of retightening and mechanical cycling on preload maintenance of retention screws

scientific article published on 01 March 2011

Evaluation of torque maintenance of abutment and cylinder screws with Morse taper implants

scientific article published in November 2012

Evaluation of transfer impressions for osseointegrated implants at various angulations.

scientific article published in December 2004

Finite element analysis to compare complete denture and implant-retained overdentures with different attachment systems

scientific article published on 01 July 2009

Implant platform switching: biomechanical approach using two-dimensional finite element analysis

scientific article published on 01 January 2010

Influence analysis of cleft type and supernumerary teeth eruption in the prognosis of bone graft in patients with cleft palate

scientific article published on 01 September 2014

Influence of abutment type and esthetic veneering on preload maintenance of abutment screw of implant-supported crowns

scientific article published on 31 May 2013

Influence of abutment-to-fixture design on reliability and failure mode of all-ceramic crown systems

scientific article published on 06 February 2014

Influence of corrosion on lipopolysaccharide affinity for two different titanium materials.

scientific article published on 22 October 2013

Influence of surface sealants on microleakage of composite resin restorations.

scientific article

Influence of the depth of intraradicular dentin on the pushout bond strength of resin materials

scientific article published on 22 September 2019

Intraoperative blood loss and blood transfusion requirements in patients undergoing orthognathic surgery

scientific article published on 26 April 2013

Long-term clinical evaluation of the color stability and stainability of acrylic resin denture teeth.

scientific article published on 7 April 2015

Long-term success with orthognathic surgery of premaxilla

scientific article published on 01 November 2014

Minimum intervention management of diastema closure using cordless displacement system and laminate veneers: A 2-year follow-up

scientific article published on 01 July 2018

Non-linear 3D finite element analysis of full-arch implant-supported fixed dentures

scientific article published on 21 February 2014

Overdenture as a restorative option for hypocalcified-hypoplastic amelogenesis imperfecta: a case report

scientific article published on 01 May 2009

Passivity versus unilateral angular misfit: evaluation of stress distribution on implant-supported single crowns: three-dimensional finite element analysis

scientific article published on 01 November 2010

Platform switching: biomechanical evaluation using three-dimensional finite element analysis

scientific article published on 01 May 2011

Preload evaluation of different screws in external hexagon joint.

scientific article published in February 2012

Prosthetic platforms in implant dentistry.

scientific article

Prosthetic transfer impression accuracy evaluation for osseointegrated implants

scientific article

Role of adhesive systems on the luting interface's thickness of ceramic laminate veneers

scientific article published on 24 June 2020

Sealing the Screw Access Channel with Polytetrafluoroethylene Tape: Advantages of the Technique

scientific article published on 07 February 2017

Stability of cp-Ti and Ti-6Al-4V alloy for dental implants as a function of saliva pH - an electrochemical study

scientific article published on August 2011

Stress analysis in simulation models with or without implant threads representation

scientific article published on 01 November 2009

Surgical techniques for maxillary bone grafting - literature review.

scientific article published on January 2014

The effect of mechanical cycling and different misfit levels on Vicker's microhardness of retention screws for single implant-supported prostheses

scientific article published on 31 August 2011

The influence of bone quality on the biomechanical behavior of full-arch implant-supported fixed prostheses

scientific article published on 11 January 2014

The role of implant/abutment system on torque maintenance of retention screws and vertical misfit of implant-supported crowns before and after mechanical cycling

scientific article

The role of nicotine, cotinine and caffeine on the electrochemical behavior and bacterial colonization to cp-Ti.

scientific article published on 14 June 2015

The role of superstructure material on the stress distribution in mandibular full-arch implant-supported fixed dentures. A CT-based 3D-FEA.

scientific article published on 31 October 2013

Three-dimensional finite element analysis of vertical and angular misfit in implant-supported fixed prostheses

scientific article published on 01 July 2011

Titanium in dentistry: historical development, state of the art and future perspectives.

scientific article published on 20 October 2012

Torque stability of different abutment screws submitted to mechanical cycling

scientific article published on 01 September 2013

Trends in funding, internationalization, and types of study for original articles published in five implant-related journals between 2005 and 2009.

scientific article published in January 2012

What is the role of lipopolysaccharide on the tribocorrosive behavior of titanium?

scientific article published on 20 November 2011

Paulina is supported by:

About Paulina

Help