List of works - Kristina Edström

3-D binder-free graphene foam as a cathode for high capacity Li–O2 batteries

article published in 2016

A delithiated LiNi0.65Co0.25Mn0.10O2 electrode material: A structural, magnetic and electrochemical study

A hard X-ray photoelectron spectroscopy study on the solid electrolyte interphase of a lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide based electrolyte for Si-electrodes

A high pressure x-ray photoelectron spectroscopy experimental method for characterization of solid-liquid interfaces demonstrated with a Li-ion battery system

scientific article published in April 2015

A stable graphite negative electrode for the lithium–sulfur battery

A versatile photoelectron spectrometer for pressures up to 30 mbar

scientific article

Accelerated Electrochemical Decomposition of Li2O2 under X-ray Illumination

article

Adiponitrile-Lithium Bis(trimethylsulfonyl)imide Solutions as Alkyl Carbonate-free Electrolytes for Li4 Ti5 O12 (LTO)/LiNi1/3 Co1/3 Mn1/3 O2 (NMC) Li-Ion Batteries

scientific article

An Organic Catalyst for Li-O2Batteries: Dilithium Quinone-1,4-Dicarboxylate

article

Analysis of the Interphase on Carbon Black Formed in High Voltage Batteries

article

At the polymer electrolyte interfaces: the role of the polymer host in interphase layer formation in Li-batteries

article published in 2015

Breaking Down a Complex System: Interpreting PES Peak Positions for Cycled Li-Ion Battery Electrodes

Cation profiling of passive films on stainless steel formed in sulphuric and acetic acid by deconvolution of angle-resolved X-ray photoelectron spectra

Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen

scientific article published on 21 March 2016

Conducting Polymer Paper-Based Cathodes for High-Areal-Capacity Lithium-Organic Batteries

article

Conducting Polymer Paper-Derived Mesoporous 3D N-doped Carbon Current Collectors for Na and Li Metal Anodes: A Combined Experimental and Theoretical Study

article

Conducting polymer paper-derived separators for lithium metal batteries

article

Constraining Si Particles within Graphene Foam Monolith: Interfacial Modification for High-Performance Li+Storage and Flexible Integrated Configuration

Corrigendum: Towards an Understanding of Li2 O2 Evolution in Li-O2 Batteries: An In Operando Synchrotron X-ray Diffraction Study

scholarly article published in ChemSusChem

Corrosion resistances and passivation of powder metallurgical and conventionally cast 316L and 2205 stainless steels

article published in 2013

Critical evaluation of the stability of highly concentrated LiTFSI - Acetonitrile electrolytes vs. graphite, lithium metal and LiFePO4 electrodes

Depth profiling the solid electrolyte interphase on lithium titanate (Li 4 Ti 5 O 12 ) using synchrotron-based photoelectron spectroscopy

Different Shades of Li4 Ti5 O12 Composites: The Impact of the Binder on Interface Layer Formation

Direct Operando Observation of Double Layer Charging and Early Solid Electrolyte Interphase Formation in Li-Ion Battery Electrolytes

scientific article published on 01 May 2020

Direct electrodeposition of aluminium nano-rods

scholarly article by Emilie Perre et al published October 2008 in Electrochemistry Communications

Effect of ethanol-assisted electrode fabrication on the performance of silicon anodes

article published in 2010

Effect of manganese on the structural and thermal stability of Li0.3Ni0.7-yCo0.3−yMn2yO2 electrode materials (y=0 and 0.05)

article published in 2011

Effect of the synthesis temperature on the structure and electrochemical behaviour of the LiNi0.65Co0.25Mn0.1O2 positive electrode material

Efficient BiVO4 Photoanodes by Postsynthetic Treatment: Remarkable Improvements in Photoelectrochemical Performance from Facile Borate Modification

scientific article published on 08 November 2019

Electric Potential Gradient at the Buried Interface between Lithium-Ion Battery Electrodes and the SEI Observed Using Photoelectron Spectroscopy

scientific article

Electrochemical behavior of LiNi1−y−zCoyMnzO2 probed through structural and magnetic properties

Electrochemical characterizations of Co0.5TiOPO4 as anode material for lithium-ion batteries

Electrochemical elaboration of electrodes and electrolytes for 3D structured batteries

Electrochemical lithium ion intercalation in Li0.5Ni0.25TiOPO4 examined by in situ X-ray diffraction

Electrode Based on Oxyphosphates as Anode Materials for High Energy Density Lithium-ion Batteries

Electrode materials for sodium ion batteries: A cheaper solution for the energy storage

scientific article published in May 2014

Electrodeposited Sb and Sb/Sb2O3Nanoparticle Coatings as Anode Materials for Li-Ion Batteries

article published in 2007

Electrodeposition and electrochemical characterisation of thick and thin coatings of Sb and Sb/Sb2O3 particles for Li-ion battery anodes

article

Electrodeposition of Vanadium Oxide/Manganese Oxide Hybrid Thin Films on Nanostructured Aluminum Substrates

scholarly article by David Rehnlund et al published 2014 in Journal of the Electrochemical Society

Electronic and Structural Changes in Ni0.5TiOPO4 Li-Ion Battery Cells Upon First Lithiation and Delithiation, Studied by High-Energy X-ray Spectroscopies

Elevated Temperature Lithium-Ion Batteries Containing SnO2Electrodes and LiTFSI-Pip14TFSI Ionic Liquid Electrolyte

Emulsion-templated bicontinuous carbon network electrodes for use in 3D microstructured batteries

Encasing Si particles within a versatile TiO 2−x F x layer as an extremely reversible anode for high energy-density lithium-ion battery

Environmentally-friendly lithium recycling from a spent organic li-ion battery

scientific article published on 29 August 2014

Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li–O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES)

Flexible freestanding Cladophora nanocellulose paper based Si anodes for lithium-ion batteries

article

Functional, water-soluble binders for improved capacity and stability of lithium–sulfur batteries

Galvanostatic electrodeposition of aluminium nano-rods for Li-ion three-dimensional micro-battery current collectors

scholarly article by Gabriel Oltean et al published March 2011 in Electrochimica Acta

High energy and power density TiO2 nanotube electrodes for 3D Li-ion microbatteries

article published in 2013

Highly efficient Ru/MnO 2 nano-catalysts for Li-O 2 batteries: Quantitative analysis of catalytic Li 2 O 2 decomposition by operando synchrotron X-ray diffraction

How the Negative Electrode Influences Interfacial and Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2Cathodes in Li-Ion Batteries

Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate as an Effective Electrolyte Additive

article by Chao Xu et al published 18 March 2015 in Chemistry of Materials

Improving the electrochemical performance of organic Li-ion battery electrodes ⬇️

scientific article published on January 31, 2013

Influence of Synthesis Routes on the Crystallography, Morphology, and Electrochemistry of Li2MnO3

scientific article published on 22 January 2020

Influence of annealing temperature on the electrochemical and surface properties of the 5-V spinel cathode material LiCr0.2Ni0.4Mn1.4O4 synthesized by a sol–gel technique

Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite CrC films

Influence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries

scholarly article by Fabian Jeschull et al published September 2016 in Journal of Power Sources

Influence of the cathode porosity on the discharge performance of the lithium–oxygen battery

Intercalation and conversion reactions in Ni0.5TiOPO4 Li-ion battery anode materials

Interface layer formation in solid polymer electrolyte lithium batteries: an XPS study

Iron Doping in Spinel NiMn2O4: Stabilization of the Mesoporous Cubic Phase and Kinetics Activation toward Highly Reversible Li+ Storage

Iron-Based Electrodes Meet Water-Based Preparation, Fluorine-Free Electrolyte and Binder: A Chance for More Sustainable Lithium-Ion Batteries?

scientific article published on 10 March 2017

LiTDI: A Highly Efficient Additive for Electrolyte Stabilization in Lithium-Ion Batteries

Lithium Insertion into Vanadium Oxide Nanotubes: Electrochemical and Structural Aspects

scholarly article by Sara Nordlinder et al published January 2006 in Chemistry of Materials

Lithium Trapping in Microbatteries Based on Lithium- and Cu2 O-Coated Copper Nanorods

Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S

scholarly article by Reza Younesi et al published 2015 in Energy and Environmental Science

Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries

Li–O2 Battery Degradation by Lithium Peroxide (Li2O2): A Model Study

article

Manganese in the SEI Layer of Li4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques

Mechanisms and Performances of Na1.5Fe0.5Ti1.5(PO4)3/C Composite as Electrode Material for Na-Ion Batteries

Mesoporous Cladophora cellulose separators for lithium-ion batteries

Modelling the morphological background to capacity fade in Si-based lithium-ion batteries

Multiscale Interfacial Strategy to Engineer Mixed Metal-Oxide Anodes toward Enhanced Cycling Efficiency

scientific article published on 30 May 2018

Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries

scientific article published on 19 April 2018

Nanocellulose Structured Paper-Based Lithium Metal Batteries

article

Nanosilicon Electrodes for Lithium-Ion Batteries: Interfacial Mechanisms Studied by Hard and Soft X-ray Photoelectron Spectroscopy

On the Electrochemical Properties and Interphase Composition of Graphite: PVdF-HFP Electrodes in Dependence of Binder Content

article

On the P2-NaxCo1-y(Mn2/3Ni1/3)yO2 Cathode Materials for Sodium-Ion Batteries: Synthesis, Electrochemical Performance, and Redox Processes Occurring during the Electrochemical Cycling.

scientific article published on 3 November 2017

On the electrochemistry of tin oxide coated tin electrodes in lithium-ion batteries

article by Solveig Böhme et al published October 2015 in Electrochimica Acta

On the electrophoretic and sol–gel deposition of active materials on aluminium rod current collectors for three-dimensional Li-ion micro-batteries

On the origin of the capacity fading for aluminium negative electrodes in Li-ion batteries

article

Origin of the irreversible capacity of the Fe0.5TiOPO4 anode material

Over-Stoichiometric NbO2 Nanoparticles for a High Energy and Power Density Lithium Microbattery

Overlapping and rate controlling electrochemical reactions for tin(IV) oxide electrodes in lithium-ion batteries

scholarly article by Solveig Böhme et al published July 2017 in Journal of Electroanalytical Chemistry

Passivation Layer and Cathodic Redox Reactions in Sodium-Ion Batteries Probed by HAXPES.

scientific article published on 22 December 2015

Photoelectron Spectroscopic Evidence for Overlapping Redox Reactions for SnO2 Electrodes in Lithium-Ion Batteries

article

Polycarbonate-based solid polymer electrolytes for Li-ion batteries

article published in 2014

Pt/α-MnO 2 nanotube: A highly active electrocatalyst for Li–O 2 battery

Realization of high performance polycarbonate-based Li polymer batteries

Recent findings and prospects in the field of pure metals as negative electrodes for Li-ion batteries

Recycled Poly(vinyl alcohol) Sponge for Carbon Encapsulation of Size-Tunable Tin Dioxide Nanocrystalline Composites

scientific article published in June 2015

Redox Behavior of Vanadium Oxide Nanotubes As Studied by X-ray Photoelectron Spectroscopy and Soft X-ray Absorption Spectroscopy

Redox-Active Separators for Lithium-Ion Batteries.

scientific article published on 19 December 2017

Reduced graphene oxide for Li–air batteries: The effect of oxidation time and reduction conditions for graphene oxide

article by Mie Møller Storm et al published April 2015 in Carbon

Role of iron in Na 1.5Fe 0.5Ti 1.5(PO 4) 3/C as electrode material for Na-ion batteries studied by operando Mössbauer spectroscopy

Role of the LiPF6 Salt for the Long-Term Stability of Silicon Electrodes in Li-Ion Batteries – A Photoelectron Spectroscopy Study

SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries

scientific article

Self-Supported Three-Dimensional Nanoelectrodes for Microbattery Applications

Size-Dependent Electrochemical Performance of Monolithic Anatase TiO2 Nanotube Anodes for Sodium-Ion Batteries

Surface Layer Evolution on Graphite During Electrochemical Sodium-tetraglyme Co-intercalation.

scientific article published on 24 March 2017

Surface characterization of the carbon cathode and the lithium anode of Li-O₂ batteries using LiClO₄ or LiBOB salts

scientific article published on 5 February 2013

Synthesis and characterization of a new layered cathode material for sodium ion batteries

Synthesis and characterization of carbon-coated Li0.5Ni0.25TiOPO4 anode material

The Buried Carbon/Solid Electrolyte Interphase in Li-ion Batteries Studied by Hard X-ray Photoelectron Spectroscopy

The Cathode Surface Composition of a Cycled Li–O2 Battery: A Photoelectron Spectroscopy Study

article

The Effect of Pore Size on the Performance of the Li-O

article published in 2010

The Effect of the Fluoroethylene Carbonate Additive in LiNi0.5Mn1.5O4- Li4Ti5O12Lithium-Ion Cells

The Role of LiTDI Additive in LiNi1/3Mn1/3Co1/3O2/Graphite Lithium-Ion Batteries at Elevated Temperatures

article

The SEI layer formed on lithium metal in the presence of oxygen: A seldom considered component in the development of the Li–O2 battery

article

The electrochemical behaviour of the carbon-coated Ni0.5TiOPO4 electrode material

The impact of size effects on the electrochemical behaviour of Cu2O-coated Cu nanopillars for advanced Li-ion microbatteries

Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries

Thin films of Cu2Sb and Cu9Sb2 as anode materials in Li-ion batteries

Three-dimensional carbon foam supported tin oxide nanocrystallites with tunable size range: Sulfonate anchoring synthesis and high rate lithium storage properties

article

Toward Solid-State 3D-Microbatteries Using Functionalized Polycarbonate-Based Polymer Electrolytes.

scientific article

Towards Li-Ion Batteries Operating at 80 °C: Ionic Liquid versus Conventional Liquid Electrolytes

Towards an Understanding of Li2 O2 Evolution in Li-O2 Batteries: An In Operando Synchrotron X-ray Diffraction Study

scientific article

Understanding and Controlling the Surface Chemistry of LiFeSO4F for an Enhanced Cathode Functionality

Understanding the Capacity Loss in LiNi0.5Mn1.5O4–Li4Ti5O12 Lithium-Ion Cells at Ambient and Elevated Temperatures

article published in 2018

Visualising the problems with balancing lithium-sulfur batteries by "mapping" internal resistance

scientific article

Why PEO as a binder or polymer coating increases capacity in the Li–S system ⬇️

scientific article published on October 4, 2013

List of works by Kristina Edström

3-D binder-free graphene foam as a cathode for high capacity Li–O2 batteries

A delithiated LiNi0.65Co0.25Mn0.10O2 electrode material: A structural, magnetic and electrochemical study

A hard X-ray photoelectron spectroscopy study on the solid electrolyte interphase of a lithium 4,5-dicyano-2-(trifluoromethyl)imidazolide based electrolyte for Si-electrodes

A high pressure x-ray photoelectron spectroscopy experimental method for characterization of solid-liquid interfaces demonstrated with a Li-ion battery system

A stable graphite negative electrode for the lithium–sulfur battery

A versatile photoelectron spectrometer for pressures up to 30 mbar

Accelerated Electrochemical Decomposition of Li2O2 under X-ray Illumination

Adiponitrile-Lithium Bis(trimethylsulfonyl)imide Solutions as Alkyl Carbonate-free Electrolytes for Li4 Ti5 O12 (LTO)/LiNi1/3 Co1/3 Mn1/3 O2 (NMC) Li-Ion Batteries

An Organic Catalyst for Li-O2Batteries: Dilithium Quinone-1,4-Dicarboxylate

Analysis of the Interphase on Carbon Black Formed in High Voltage Batteries

At the polymer electrolyte interfaces: the role of the polymer host in interphase layer formation in Li-batteries

Breaking Down a Complex System: Interpreting PES Peak Positions for Cycled Li-Ion Battery Electrodes

Cation profiling of passive films on stainless steel formed in sulphuric and acetic acid by deconvolution of angle-resolved X-ray photoelectron spectra

Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen

Conducting Polymer Paper-Based Cathodes for High-Areal-Capacity Lithium-Organic Batteries

Conducting Polymer Paper-Derived Mesoporous 3D N-doped Carbon Current Collectors for Na and Li Metal Anodes: A Combined Experimental and Theoretical Study

Conducting polymer paper-derived separators for lithium metal batteries

Constraining Si Particles within Graphene Foam Monolith: Interfacial Modification for High-Performance Li+Storage and Flexible Integrated Configuration

Corrigendum: Towards an Understanding of Li2 O2 Evolution in Li-O2 Batteries: An In Operando Synchrotron X-ray Diffraction Study

Corrosion resistances and passivation of powder metallurgical and conventionally cast 316L and 2205 stainless steels

Critical evaluation of the stability of highly concentrated LiTFSI - Acetonitrile electrolytes vs. graphite, lithium metal and LiFePO4 electrodes

Depth profiling the solid electrolyte interphase on lithium titanate (Li 4 Ti 5 O 12 ) using synchrotron-based photoelectron spectroscopy

Different Shades of Li4 Ti5 O12 Composites: The Impact of the Binder on Interface Layer Formation

Direct Operando Observation of Double Layer Charging and Early Solid Electrolyte Interphase Formation in Li-Ion Battery Electrolytes

Direct electrodeposition of aluminium nano-rods

Effect of ethanol-assisted electrode fabrication on the performance of silicon anodes

Effect of manganese on the structural and thermal stability of Li0.3Ni0.7-yCo0.3−yMn2yO2 electrode materials (y=0 and 0.05)

Effect of the synthesis temperature on the structure and electrochemical behaviour of the LiNi0.65Co0.25Mn0.1O2 positive electrode material

Efficient BiVO4 Photoanodes by Postsynthetic Treatment: Remarkable Improvements in Photoelectrochemical Performance from Facile Borate Modification

Electric Potential Gradient at the Buried Interface between Lithium-Ion Battery Electrodes and the SEI Observed Using Photoelectron Spectroscopy

Electrochemical behavior of LiNi1−y−zCoyMnzO2 probed through structural and magnetic properties

Electrochemical characterizations of Co0.5TiOPO4 as anode material for lithium-ion batteries

Electrochemical elaboration of electrodes and electrolytes for 3D structured batteries

Electrochemical lithium ion intercalation in Li0.5Ni0.25TiOPO4 examined by in situ X-ray diffraction

Electrode Based on Oxyphosphates as Anode Materials for High Energy Density Lithium-ion Batteries

Electrode materials for sodium ion batteries: A cheaper solution for the energy storage

Electrodeposited Sb and Sb/Sb2O3Nanoparticle Coatings as Anode Materials for Li-Ion Batteries

Electrodeposition and electrochemical characterisation of thick and thin coatings of Sb and Sb/Sb2O3 particles for Li-ion battery anodes

Electrodeposition of Vanadium Oxide/Manganese Oxide Hybrid Thin Films on Nanostructured Aluminum Substrates

Electronic and Structural Changes in Ni0.5TiOPO4 Li-Ion Battery Cells Upon First Lithiation and Delithiation, Studied by High-Energy X-ray Spectroscopies

Elevated Temperature Lithium-Ion Batteries Containing SnO2Electrodes and LiTFSI-Pip14TFSI Ionic Liquid Electrolyte

Emulsion-templated bicontinuous carbon network electrodes for use in 3D microstructured batteries

Encasing Si particles within a versatile TiO 2−x F x layer as an extremely reversible anode for high energy-density lithium-ion battery

Environmentally-friendly lithium recycling from a spent organic li-ion battery

Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li–O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES)

Flexible freestanding Cladophora nanocellulose paper based Si anodes for lithium-ion batteries

Functional, water-soluble binders for improved capacity and stability of lithium–sulfur batteries

Galvanostatic electrodeposition of aluminium nano-rods for Li-ion three-dimensional micro-battery current collectors

High energy and power density TiO2 nanotube electrodes for 3D Li-ion microbatteries

Highly efficient Ru/MnO 2 nano-catalysts for Li-O 2 batteries: Quantitative analysis of catalytic Li 2 O 2 decomposition by operando synchrotron X-ray diffraction

How the Negative Electrode Influences Interfacial and Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2Cathodes in Li-Ion Batteries

Improved Performance of the Silicon Anode for Li-Ion Batteries: Understanding the Surface Modification Mechanism of Fluoroethylene Carbonate as an Effective Electrolyte Additive

Improving the electrochemical performance of organic Li-ion battery electrodes ⬇️

Influence of Synthesis Routes on the Crystallography, Morphology, and Electrochemistry of Li2MnO3

Influence of annealing temperature on the electrochemical and surface properties of the 5-V spinel cathode material LiCr0.2Ni0.4Mn1.4O4 synthesized by a sol–gel technique

Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite CrC films

Influence of inactive electrode components on degradation phenomena in nano-Si electrodes for Li-ion batteries

Influence of the cathode porosity on the discharge performance of the lithium–oxygen battery

Intercalation and conversion reactions in Ni0.5TiOPO4 Li-ion battery anode materials

Interface layer formation in solid polymer electrolyte lithium batteries: an XPS study

Iron Doping in Spinel NiMn2O4: Stabilization of the Mesoporous Cubic Phase and Kinetics Activation toward Highly Reversible Li+ Storage

Iron-Based Electrodes Meet Water-Based Preparation, Fluorine-Free Electrolyte and Binder: A Chance for More Sustainable Lithium-Ion Batteries?

LiTDI: A Highly Efficient Additive for Electrolyte Stabilization in Lithium-Ion Batteries

Lithium Insertion into Vanadium Oxide Nanotubes: Electrochemical and Structural Aspects

Lithium Trapping in Microbatteries Based on Lithium- and Cu2 O-Coated Copper Nanorods

Lithium salts for advanced lithium batteries: Li–metal, Li–O2, and Li–S

Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries

Li–O2 Battery Degradation by Lithium Peroxide (Li2O2): A Model Study

Manganese in the SEI Layer of Li4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques

Mechanisms and Performances of Na1.5Fe0.5Ti1.5(PO4)3/C Composite as Electrode Material for Na-Ion Batteries

Mesoporous Cladophora cellulose separators for lithium-ion batteries

Modelling the morphological background to capacity fade in Si-based lithium-ion batteries

Multiscale Interfacial Strategy to Engineer Mixed Metal-Oxide Anodes toward Enhanced Cycling Efficiency

Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries

Nanocellulose Structured Paper-Based Lithium Metal Batteries

Nanosilicon Electrodes for Lithium-Ion Batteries: Interfacial Mechanisms Studied by Hard and Soft X-ray Photoelectron Spectroscopy

On the Electrochemical Properties and Interphase Composition of Graphite: PVdF-HFP Electrodes in Dependence of Binder Content

On the P2-NaxCo1-y(Mn2/3Ni1/3)yO2 Cathode Materials for Sodium-Ion Batteries: Synthesis, Electrochemical Performance, and Redox Processes Occurring during the Electrochemical Cycling.

On the electrochemistry of tin oxide coated tin electrodes in lithium-ion batteries