List of works - Thomas J. Joyce

19th European conference on biomaterials

scientific article published in November 2005

5th World Congress of Biomechanics

scientific article published in September 2006

A biomechanical study on variation of compressive force along the Acutrak 2 screw

scientific article published on 11 August 2011

A comparative surface topographical analysis of explanted total knee replacement prostheses: Oxidised zirconium vs cobalt chromium femoral components.

scientific article

A comparison of ex vivo and in vitro Sutter metacarpophalangeal prostheses

scientific article published on 01 February 2003

A comparison study of stem taper material loss at similar and mixed metal head-neck taper junctions.

scientific article

A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis

scientific article published on 12 January 2017

A novel four-caster manual vehicle manoeuvring investigation: Higher loading-weights require larger turning spaces.

scientific article published on May 2015

A novel method for measuring acetabular cup deformation in cadavers

scientific article

Acetabular shell deformation as a function of shell stiffness and bone strength

scientific article published on 17 February 2016

Adverse reaction to metal debris following hip resurfacing: the influence of component type, orientation and volumetric wear

scientific article published on 01 February 2011

An analysis of explanted pyrolytic carbon prostheses

scientific article published on 04 December 2012

Analysis of Explanted Magnetically Controlled Growing Rods from 7 UK Spinal Centers

scientific article published on 28 April 2017

Analysis of the mechanism of fracture of silicone metacarpophalangeal prostheses.

scientific article

Aseptic lymphocyte-dominated vasculitis-associated lesions are related to changes in metal ion handling in the joint capsules of metal-on-metal hip arthroplasties

scientific article published on 01 June 2018

Blood metal ion concentrations after hip resurfacing arthroplasty: a comparative study of articular surface replacement and Birmingham Hip Resurfacing arthroplasties

scientific article published on 01 October 2009

CORR Insights®: the John Charnley Award: highly crosslinked polyethylene in total hip arthroplasty decreases long-term wear: a double-blind randomized trial.

scientific article

Challenges associated with using bovine serum in wear testing orthopaedic biopolymers

scientific article published in October 2011

Changes in surface topography at the TKA backside articulation following in vivo service: a retrieval analysis.

scientific article published on 7 August 2014

Comparative wear tests of ultra-high molecular weight polyethylene and cross-linked polyethylene

scientific article published on 6 March 2013

Currently available medical engineering degrees in the UK. Part 1: Undergraduate degrees

scientific article published in May 2009

Currently available medical engineering degrees in the UK. Part 2: Postgraduate degrees

scientific article published in May 2009

Currently available metacarpophalangeal prostheses: their designs and prospective considerations.

scientific article

Determining material loss from the femoral stem trunnion in hip arthroplasty using a coordinate measuring machine

scientific article published in January 2015

Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation

scientific article published on 10 August 2017

Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement: A consequence of excess wear

scientific article published on 01 January 2010

Effect of size and dimensional tolerance of reverse total shoulder arthroplasty on wear: An in-silico study

scientific article published on 7 April 2016

Engineering of a multi-station shoulder simulator

scientific article published in May 2016

Europe's new device regulations fail to protect the public

scientific article published in the British Medical Journal

Evaluating the Surface Topography of Pyrolytic Carbon Finger Prostheses through Measurement of Various Roughness Parameters

scientific article published on 14 April 2016

Explant analysis of the Biomet Magnum/ReCap metal-on-metal hip joint.

scientific article published on February 2017

Henry's pelvic deltoid: antiquated concept or important consideration for total hip arthroplasty? An anatomical study.

scientific article published on 3 August 2012

Implants for the first metatarsophalangeal joint and prospective considerations.

scientific article

In vitro tests of substitute lubricants for wear testing orthopaedic biomaterials

scientific article published on 9 April 2013

In vitro wear testing of a contemporary design of reverse shoulder prosthesis

scientific article published on 8 August 2015

In vitro wear testing of the PyroCarbon proximal interphalangeal joint replacement: Five million cycles of flexion and extension

scientific article published on 01 May 2015

Investigation of Taper Failure in a Contemporary Metal-on-Metal Hip Arthroplasty System Through Examination of Unused and Explanted Prostheses

scientific article

Material loss at the femoral head taper

scientific article published on 01 October 2018

NeuFlex metacarpophalangeal prostheses tested in vitro

scientific article published in January 2005

Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses.

scientific article published on 17 October 2015

Practical considerations for volumetric wear analysis of explanted hip arthroplasties

scientific article

Precaution, governance and the failure of medical implants: the ASR((TM)) hip in the UK

scientific article published on 26 November 2014

Prediction of lubrication regimes in two-piece metacarpophalangeal prostheses

scientific article published on 28 July 2006

Re: Grading of radiographic osteolytic changes after silastic metacarpophalangeal arthroplasty and a prospective trial of osteolysis following use of Swanson and Sutter prostheses

scientific article published on 2 January 2007

Re: In vivo roughening of retrieved total knee arthroplasty femoral components, Malikian et al., The Knee, 2014, 278-82.

scientific article published on 5 March 2014

Reducing metal ion release following hip resurfacing arthroplasty

scientific article published on 01 April 2011

Resolving the viscoelasticity and anisotropy dependence of the mechanical properties of skin from a porcine model

scientific article published on 9 July 2015

Retrospective cohort study of the performance of the Pinnacle metal on metal (MoM) total hip replacement: a single-centre investigation in combination with the findings of a national retrieval centre.

scientific article published on 29 April 2016

Seventh World Biomaterials Congress. 17-21 May 2004, Sydney Convention and Exhibition Centre, Darling Harbour, Sydney, Australia

scientific article published in September 2004

Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system

scientific article

Sites of fractures in explanted NeuFlex® silicone metacarpophalangeal joint prostheses

scientific article published on 12 May 2018

Snapping the fingers

scientific article published in December 2003

Special section on biomedical engineering education

scientific article published on 01 May 2009

The clinical implications of elevated blood metal ion concentrations in asymptomatic patients with MoM hip resurfacings: a cohort study.

scientific article published on 12 March 2013

The design and development of a finger joint simulator

scientific article published in February 2016

The effect of component size and orientation on the concentrations of metal ions after resurfacing arthroplasty of the hip.

scientific article

The influence of contact stress on the wear of cross-linked polyethylene

scientific article published on 23 August 2018

The influence of the strength of bone on the deformation of acetabular shells: a laboratory experiment in cadavers

scientific article published in April 2015

The study of single piece metacarpophalangeal implants

scientific article published on 01 February 2002

Topographical analysis of the femoral components of ex vivo total knee replacements

scientific article published on 17 November 2012

Validation of an optical system to measure acetabular shell deformation in cadavers.

scientific article published in August 2014

Wear at the taper-trunnion junction of contemporary ceramic-on-ceramic hips shown in a multistation hip simulator

scientific article published on 05 September 2018

Wear testing of a DJOA finger prosthesis in vitro.

scientific article

[Tribologic investigation of a metacarpophalangeal prosthesis]

scientific article published on 01 September 2003

List of works by Thomas J. Joyce

19th European conference on biomaterials

5th World Congress of Biomechanics

A biomechanical study on variation of compressive force along the Acutrak 2 screw

A comparative surface topographical analysis of explanted total knee replacement prostheses: Oxidised zirconium vs cobalt chromium femoral components.

A comparison of ex vivo and in vitro Sutter metacarpophalangeal prostheses

A comparison study of stem taper material loss at similar and mixed metal head-neck taper junctions.

A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis

A novel four-caster manual vehicle manoeuvring investigation: Higher loading-weights require larger turning spaces.

A novel method for measuring acetabular cup deformation in cadavers

Acetabular shell deformation as a function of shell stiffness and bone strength

Adverse reaction to metal debris following hip resurfacing: the influence of component type, orientation and volumetric wear

An analysis of explanted pyrolytic carbon prostheses

Analysis of Explanted Magnetically Controlled Growing Rods from 7 UK Spinal Centers

Analysis of the mechanism of fracture of silicone metacarpophalangeal prostheses.

Aseptic lymphocyte-dominated vasculitis-associated lesions are related to changes in metal ion handling in the joint capsules of metal-on-metal hip arthroplasties

Blood metal ion concentrations after hip resurfacing arthroplasty: a comparative study of articular surface replacement and Birmingham Hip Resurfacing arthroplasties

CORR Insights®: the John Charnley Award: highly crosslinked polyethylene in total hip arthroplasty decreases long-term wear: a double-blind randomized trial.

Challenges associated with using bovine serum in wear testing orthopaedic biopolymers

Changes in surface topography at the TKA backside articulation following in vivo service: a retrieval analysis.

Comparative wear tests of ultra-high molecular weight polyethylene and cross-linked polyethylene

Currently available medical engineering degrees in the UK. Part 1: Undergraduate degrees

Currently available medical engineering degrees in the UK. Part 2: Postgraduate degrees

Currently available metacarpophalangeal prostheses: their designs and prospective considerations.

Determining material loss from the femoral stem trunnion in hip arthroplasty using a coordinate measuring machine

Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation

Early failure of metal-on-metal bearings in hip resurfacing and large-diameter total hip replacement: A consequence of excess wear

Effect of size and dimensional tolerance of reverse total shoulder arthroplasty on wear: An in-silico study

Engineering of a multi-station shoulder simulator

Europe's new device regulations fail to protect the public

Evaluating the Surface Topography of Pyrolytic Carbon Finger Prostheses through Measurement of Various Roughness Parameters

Explant analysis of the Biomet Magnum/ReCap metal-on-metal hip joint.

Henry's pelvic deltoid: antiquated concept or important consideration for total hip arthroplasty? An anatomical study.

Implants for the first metatarsophalangeal joint and prospective considerations.

In vitro tests of substitute lubricants for wear testing orthopaedic biomaterials

In vitro wear testing of a contemporary design of reverse shoulder prosthesis

In vitro wear testing of the PyroCarbon proximal interphalangeal joint replacement: Five million cycles of flexion and extension

Investigation of Taper Failure in a Contemporary Metal-on-Metal Hip Arthroplasty System Through Examination of Unused and Explanted Prostheses

Material loss at the femoral head taper

NeuFlex metacarpophalangeal prostheses tested in vitro

Numerical and experimental investigations for the evaluation of the wear coefficient of reverse total shoulder prostheses.

Practical considerations for volumetric wear analysis of explanted hip arthroplasties

Precaution, governance and the failure of medical implants: the ASR((TM)) hip in the UK

Prediction of lubrication regimes in two-piece metacarpophalangeal prostheses

Re: Grading of radiographic osteolytic changes after silastic metacarpophalangeal arthroplasty and a prospective trial of osteolysis following use of Swanson and Sutter prostheses

Re: In vivo roughening of retrieved total knee arthroplasty femoral components, Malikian et al., The Knee, 2014, 278-82.

Reducing metal ion release following hip resurfacing arthroplasty

Resolving the viscoelasticity and anisotropy dependence of the mechanical properties of skin from a porcine model

Retrospective cohort study of the performance of the Pinnacle metal on metal (MoM) total hip replacement: a single-centre investigation in combination with the findings of a national retrieval centre.

Seventh World Biomaterials Congress. 17-21 May 2004, Sydney Convention and Exhibition Centre, Darling Harbour, Sydney, Australia

Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system

Sites of fractures in explanted NeuFlex® silicone metacarpophalangeal joint prostheses

Snapping the fingers

Special section on biomedical engineering education

The clinical implications of elevated blood metal ion concentrations in asymptomatic patients with MoM hip resurfacings: a cohort study.

The design and development of a finger joint simulator

The effect of component size and orientation on the concentrations of metal ions after resurfacing arthroplasty of the hip.

The influence of contact stress on the wear of cross-linked polyethylene

The influence of the strength of bone on the deformation of acetabular shells: a laboratory experiment in cadavers

The study of single piece metacarpophalangeal implants

Topographical analysis of the femoral components of ex vivo total knee replacements

Validation of an optical system to measure acetabular shell deformation in cadavers.

Wear at the taper-trunnion junction of contemporary ceramic-on-ceramic hips shown in a multistation hip simulator

Wear testing of a DJOA finger prosthesis in vitro.

[Tribologic investigation of a metacarpophalangeal prosthesis]