Search filters

List of works by Amir A. Zadpoor

3D Printing of Large Areas of Highly Ordered Submicron Patterns for Modulating Cell Behavior

scientific article published on 18 December 2019

3D-Printed Submicron Patterns Reveal the Interrelation between Cell Adhesion, Cell Mechanics, and Osteogenesis

scientific article published on 12 July 2021

A cam deformity is gradually acquired during skeletal maturation in adolescent and young male soccer players: a prospective study with minimum 2-year follow-up

scientific article published on 28 February 2014

A mechanical model to determine the influence of masses and mass distribution on the impact force during running--a discussion

scientific article published on 03 October 2005

A model-based parametric study of impact force during running

scientific article published on 7 November 2006

A novel ultrasound technique for detection of osteochondral defects in the ankle joint: a parametric and feasibility study

scientific article

Additive Manufacturing of Biomaterials, Tissues, and Organs

scientific article

Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties.

scientific article published on 21 April 2015

Additively Manufactured and Surface Biofunctionalized Porous Nitinol.

scientific article

Additively manufactured biodegradable porous iron

scientific article published on 06 July 2018

Additively manufactured biodegradable porous magnesium.

scientific article

Additively manufactured biodegradable porous zinc

scientific article published on 28 October 2019

Additively manufactured functionally graded biodegradable porous iron

scientific article published on 11 July 2019

Additively manufactured functionally graded biodegradable porous zinc

scientific article published on 29 January 2020

Additively manufactured metallic porous biomaterials based on minimal surfaces: A unique combination of topological, mechanical, and mass transport properties.

scientific article

Additively manufactured porous metallic biomaterials

scientific article published on 01 July 2019

Additively manufactured porous tantalum implants.

scientific article published on 11 December 2014

An Experimental and Finite Element Protocol to Investigate the Transport of Neutral and Charged Solutes across Articular Cartilage.

scientific article published on 23 April 2017

An improved cost function for modeling of muscle activity during running

scientific article published on 14 December 2010

Analytical relationships for prediction of the mechanical properties of additively manufactured porous biomaterials

scientific article

Antibacterial Behavior of Additively Manufactured Porous Titanium with Nanotubular Surfaces Releasing Silver Ions.

scientific article published on 14 June 2016

Antibacterial and immunogenic behavior of silver coatings on additively manufactured porous titanium

scientific article published on 28 September 2018

Application of multiphysics models to efficient design of experiments of solute transport across articular cartilage.

scientific article published on 17 September 2016

Bactericidal effects of nanopatterns: a systematic review

article

Bioengineered Skin Intended for Skin Disease Modeling ⬇️

scientific article published on 20 March 2019

Biomaterials and Tissue Biomechanics: A Match Made in Heaven?

scientific article published on 13 May 2017

Bone regeneration performance of surface-treated porous titanium

scientific article

Bone shape difference between control and osteochondral defect groups of the ankle joint.

scientific article

Bone tissue engineering via growth factor delivery: from scaffolds to complex matrices.

scientific article published on 9 June 2018

Bone tissue regeneration: the role of scaffold geometry

scientific article

Combined inverse-forward artificial neural networks for fast and accurate estimation of the diffusion coefficients of cartilage based on multi-physics models.

scientific article published on 23 June 2016

Computational load estimation of the femur

scientific article published on 27 February 2012

Corrigendum to "Additively manufactured functionally graded biodegradable porous iron" [Acta Biomaterialia 96 (2019) 646-661]

scientific article published on 27 November 2019

Crumpling-based soft metamaterials: the effects of sheet pore size and porosity.

scientific article published on 12 October 2017

Current Trends in Metallic Orthopedic Biomaterials: From Additive Manufacturing to Bio-Functionalization, Infection Prevention, and Beyond

scientific article published on 10 September 2018

Data on the surface morphology of additively manufactured Ti-6Al-4V implants during processing by plasma electrolytic oxidation

scientific article

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

scientific article

Determination of the mechanical and physical properties of cartilage by coupling poroelastic-based finite element models of indentation with artificial neural networks

scientific article

Development and mechanical characterisation of self-compressed collagen gels

scientific article published on 28 November 2017

Effect of Alkali-Acid-Heat Chemical Surface Treatment on Electron Beam Melted Porous Titanium and Its Apatite Forming Ability.

scientific article published on 8 April 2015

Effects of anodizing parameters and heat treatment on nanotopographical features, bioactivity, and cell culture response of additively manufactured porous titanium.

scientific article published on 26 February 2015

Effects of applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials under compressive loading

scientific article

Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials.

scientific article

Effects of densitometry, material mapping and load estimation uncertainties on the accuracy of patient-specific finite-element models of the scapula.

scientific article published on 12 February 2014

Effects of muscle fatigue on the ground reaction force and soft-tissue vibrations during running: a model study

scientific article published on 14 December 2011

Effects of non-enzymatic glycation on the micro- and nano-mechanics of articular cartilage.

scientific article published on 30 September 2017

Effects of plasma electrolytic oxidation process on the mechanical properties of additively manufactured porous biomaterials

scientific article published on 12 March 2017

Enhanced bone regeneration of cortical segmental bone defects using porous titanium scaffolds incorporated with colloidal gelatin gels for time- and dose-controlled delivery of dual growth factors.

scientific article

Estimation of 3D rotation of femur in 2D hip radiographs

scientific article published on 13 July 2012

Etiology of Femoroacetabular Impingement in Athletes: A Review of Recent Findings

scientific article published in August 2015

Experimental validation of finite element model for proximal composite femur using optical measurements

scientific article published on 19 February 2013

Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell

scientific article published on 20 June 2015

Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys.

scientific article published on 22 February 2018

Fatigue behavior of porous biomaterials manufactured using selective laser melting.

scientific article

Fatigue crack propagation in additively manufactured porous biomaterials.

scientific article

Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type.

scientific article published on 7 November 2017

Fracture Behavior of Bio-Inspired Functionally Graded Soft-Hard Composites Made by Multi-Material 3D Printing: The Case of Colinear Cracks

scientific article published on 26 August 2019

From microstructural design to surface engineering: A tailored approach for improving fatigue life of additively manufactured meta-biomaterials

article

Frontiers of Additively Manufactured Metallic Materials

scientific article published on 30 August 2018

Full-field strain measurement and fracture analysis of rat femora in compression test.

scientific article published on 16 March 2013

Full-field strain measurement during mechanical testing of the human femur at physiologically relevant strain rates

scientific article published on November 2014

Functional evaluation of a non-assembly 3D-printed hand prosthesis

scientific article published on 06 September 2019

Guidelines for an optimized indentation protocol for measurement of cartilage stiffness: The effects of spatial variation and indentation parameters

scientific article published on 16 September 2016

How accurately can we predict the fracture load of the proximal femur using finite element models?

scientific article published on 10 January 2014

How does tissue regeneration influence the mechanical behavior of additively manufactured porous biomaterials?

scientific article

In-silico quest for bactericidal but non-cytotoxic nanopatterns

scientific article published on 28 August 2018

Isolated and modulated effects of topology and material type on the mechanical properties of additively manufactured porous biomaterials

scientific article published on 4 January 2018

Isolated effects of external bath osmolality, solute concentration, and electrical charge on solute transport across articular cartilage

scientific article published on 6 October 2016

Length-scale dependency of biomimetic hard-soft composites

scientific article published in Scientific Reports

Mass-spring-damper modelling of the human body to study running and hopping--an overview.

scientific article published on December 2011

Mechanical Properties of Additively Manufactured Thick Honeycombs

scientific article published on 23 July 2016

Mechanical analysis of a rodent segmental bone defect model: the effects of internal fixation and implant stiffness on load transfer.

scientific article

Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells.

scientific article

Mechanical factors explain development of cam-type deformity

scientific article published on 21 September 2014

Mechanical performance of additively manufactured meta-biomaterials

scientific article published on 24 December 2018

Mechanical properties of additively manufactured octagonal honeycombs

scientific article published on 8 August 2016

Mechanical properties of human bone-implant interface tissue in aseptically loose hip implants

scientific article published on 26 June 2014

Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models.

scientific article published on 10 November 2015

Mechanics of Biological Tissues and Biomaterials: Current Trends

scientific article published on 21 July 2015

Mechanics of additively manufactured biomaterials

scientific article published in June 2017

Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell.

scientific article published on 31 July 2015

Meta-biomaterials

scientific article published on 18 October 2019

Micro- and nano-mechanics of osteoarthritic cartilage: The effects of tonicity and disease severity

scientific article published on 24 March 2016

Microscopic full-field three-dimensional strain measurement during the mechanical testing of additively manufactured porous biomaterials

scientific article

Modeling muscle activity to study the effects of footwear on the impact forces and vibrations of the human body during running

scientific article published in November 2009

Multi-scale imaging techniques to investigate solute transport across articular cartilage

scientific article published on 22 June 2018

Multiphasic modeling of charged solute transport across articular cartilage: Application of multi-zone finite-bath model

scientific article published on 21 March 2016

Nanomaterials for bone tissue regeneration: updates and future perspectives

scientific article published on 29 November 2019

Nanomechanical characterization of heterogeneous and hierarchical biomaterials and tissues using nanoindentation: the role of finite mixture models

scientific article published on 2 December 2014

Nanomechanical properties of multi-block copolymer microspheres for drug delivery applications

scientific article published on 19 March 2014

Nanopattern-induced osteogenic differentiation of stem cells - A systematic review

scientific article published on 22 September 2016

Neutral solute transport across osteochondral interface: A finite element approach.

scientific article published on 19 October 2016

Non-Auxetic Mechanical Metamaterials

scientific article published on 20 February 2019

Non-enzymatic cross-linking of collagen type II fibrils is tuned via osmolality switch

scientific article published on 15 January 2018

Open forward and inverse problems in theoretical modeling of bone tissue adaptation.

scientific article published on 29 May 2013

Optimization of screw fixation in rat bone with extracorporeal shock waves.

scientific article

Origami lattices with free-form surface ornaments.

scientific article published on 29 November 2017

Osteostatin-coated porous titanium can improve early bone regeneration of cortical bone defects in rats.

scientific article published on 10 March 2015

Patient-specific bone modeling and analysis: the role of integration and automation in clinical adoption

scientific article published on 18 December 2014

Patient-specific finite element modeling of bones.

scientific article published on 27 December 2012

Prediction of the elastic strain limit of tendons

scientific article published on 2 December 2013

Quantitative mechanics of 3D printed nanopillars interacting with bacterial cells

scientific article published on 11 September 2020

Reactive ion etching for fabrication of biofunctional titanium nanostructures

scientific article published on 11 December 2019

Relationship between in vitro apatite-forming ability measured using simulated body fluid and in vivo bioactivity of biomaterials.

scientific article published on 31 October 2013

Relationship between the shape and density distribution of the femur and its natural frequencies of vibration.

scientific article published on 15 August 2014

Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials

scientific article published on 19 December 2014

Repeatability of digital image correlation for measurement of surface strains in composite long bones

scientific article

Revival of pure titanium for dynamically loaded porous implants using additive manufacturing

scientific article published on 5 May 2015

Selective laser melting porous metallic implants with immobilized silver nanoparticles kill and prevent biofilm formation by methicillin-resistant Staphylococcus aureus

scientific article

Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects.

scientific article

Self-defending additively manufactured bone implants bearing silver and copper nanoparticles

scientific article published on 01 February 2020

Shape-matching soft mechanical metamaterials.

scientific article published on 17 January 2018

Simultaneous Delivery of Multiple Antibacterial Agents from Additively Manufactured Porous Biomaterials to Fully Eradicate Planktonic and Adherent Staphylococcus aureus

scientific article published on 11 July 2017

Solute transport at the interface of cartilage and subchondral bone plate: Effect of micro-architecture.

scientific article published on 29 December 2016

Special issue: multiscale biomechanics

scientific article published on 02 June 2015

Spiral Honeycomb Microstructured Bacterial Cellulose for Increased Strength and Toughness

scientific article published on 28 October 2020

Statistical shape and appearance models for fast and automated estimation of proximal femur fracture load using 2D finite element models

scientific article published on 05 July 2014

Statistical shape and appearance models of bones

scientific article published on 12 December 2013

Strain rate-dependent mechanical metamaterials

scientific article published on 17 June 2020

Structural and mechanical characterisation of the peri-prosthetic tissue surrounding loosened hip prostheses. An explorative study

scientific article published on 25 May 2016

Subject-specific modeling of the scapula bone tissue adaptation

scientific article published on 26 July 2013

Submicron Patterns-on-a-Chip: Fabrication of a Microfluidic Device Incorporating 3D Printed Surface Ornaments

scientific article published on 14 October 2019

Ten guidelines for the design of non-assembly mechanisms: The case of 3D-printed prosthetic hands

scientific article published on 16 August 2018

The effects of lower extremity muscle fatigue on the vertical ground reaction force: a meta-analysis

scientific article published on 01 August 2012

The expansion of Google Scholar versus Web of Science: a longitudinal study

scientific article published in August 2013

The relationship between lower-extremity stress fractures and the ground reaction force: a systematic review.

scientific article published on 16 September 2010

The sense of biomechanical studies in orthopaedics: a discussion on a recent study published in Injury

scientific article published on 15 April 2015

Three-Dimensional Registration of Freehand-Tracked Ultrasound to CT Images of the Talocrural Joint

scientific article published on 21 July 2018

Three-dimensional analysis of shape variations and symmetry of the fibula, tibia, calcaneus and talus

scientific article published on 04 November 2018

Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials

scientific article published on 08 December 2018

Towards deployable meta-implants.

scientific article published on 16 May 2018

Towards osteogenic and bactericidal nanopatterns?

scientific article published on 25 February 2019

Transformation methods for estimation of subject-specific scapular muscle attachment sites.

scientific article published on 6 February 2013

Transport of neutral solute across articular cartilage: the role of zonal diffusivities

scientific article published on 2 June 2015

Typical Shape Differences in the Subtalar Joint Bones Between Subjects with Chronic Ankle Instability and Controls

scientific article published on 26 May 2019

Unfocused shockwaves for osteoinduction in bone substitutes in rat cortical bone defects.

scientific article published on 3 July 2018

Paulina is supported by:

About Paulina

Help