Search filters

List of works by Américo B Correr

Bonding orthodontics brackets to enamel using experimental composites with an iodonium salt

scientific article published on 23 September 2013

Bonding performance of experimental bioactive/biomimetic self-etch adhesives doped with calcium-phosphate fillers and biomimetic analogs of phosphoproteins

scientific article published on 26 July 2016

Can the hydrophilicity of functional monomers affect chemical interaction?

scientific article published on 27 November 2013

Chemical interaction of 10-MDP (methacryloyloxi-decyl-dihydrogen-phosphate) in zinc-doped self-etch adhesives

scientific article published on 10 January 2014

Clinical evaluation of the failure rates of metallic brackets.

scientific article published on March 2012

Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

scientific article published on 01 January 2019

Comparison of Silorane and Methacrylate-Based Composites on the Polymerization Heat Generated with Different Light-Curing Units and Dentin Thicknesses ⬇️

scientific article published on January 1, 2013

Correlation between bond strength and nanomechanical properties of adhesive interface.

scientific article

Deflection and Flexural Strength Effects on the Roughness of Aesthetic-Coated Orthodontic Wires.

scientific article

Degradation of Adhesive-Dentin Interfaces Created Using Different Bonding Strategies after Five-year Simulated Pulpal Pressure

scientific article published on 01 January 2019

Dimensional Change of Elastomeric Materials after Immersion in Disinfectant Solutions for Different Times ⬇️

scientific article published on July 1, 2011

Effect of Acid Etching, Silane and Thermal Cycling on the Bond Strength of Metallic Brackets to Ceramic.

scientific article published on October 2016

Effect of Beam Profiles From Different Light Emission Tip Types of Multiwave Light-emitting Diodes on the Curing Profile of Resin-based Composites

scientific article published on 31 January 2019

Effect of Hydrofluoric Acid Concentration and Etching Time on Bond Strength to Lithium Disilicate Glass Ceramic

scientific article published on 14 July 2017

Effect of Hydrofluoric Acid Concentration and Thermal Cycling on the Bond Strength of Brackets to Ceramic

scientific article published on 01 November 2019

Effect of Polymerization Cycles on Gloss, Roughness, Hardness and Impact Strength of Acrylic Resins

scientific article published in April 2016

Effect of a new method to simulate pulpal pressure on bond strength and nanoleakage of dental adhesives to dentin

scientific article published on 01 December 2012

Effect of activation mode on shear bond strength of metallic brackets.

scientific article

Effect of adhesive remnant removal on enamel topography after bracket debonding

scientific article

Effect of antioxidants on the dentin interface bond stability of adhesives exposed to hydrolytic degradation.

scientific article

Effect of bar cross-section geometry on stress distribution in overdenture-retaining system simulating horizontal misfit and bone loss

scientific article published on 20 June 2013

Effect of bonding material, etching time and silane on the bond strength of metallic orthodontic brackets to ceramic.

scientific article

Effect of composite containing an iodonium salt on the bond strength of brackets to bovine enamel.

scientific article published in January 2014

Effect of different photoinitiators and reducing agents on cure efficiency and color stability of resin-based composites using different LED wavelengths

scientific article published on 3 September 2015

Effect of etching time and light source on the bond strength of metallic brackets to ceramic.

scientific article

Effect of light-curing method and cement activation mode on resin cement knoop hardness

scientific article published on 29 August 2007

Effects of different photo-polymerization protocols on resin-dentine μTBS, mechanical properties and cross-link density of a nano-filled resin composite.

scientific article published on 9 June 2012

Effects of surface treatments, thermocycling, and cyclic loading on the bond strength of a resin cement bonded to a lithium disilicate glass ceramic.

scientific article published on 3 August 2012

Evaluation of contraction stress, conversion degree, and cross-link density in low-shrinkage composites

scientific article

Evaluation of the micro-mechanical strength of resin bonded–dentin interfaces submitted to short-term degradation strategies

scientific article published on 28 June 2012

Halogen and LED light curing of composite: temperature increase and Knoop hardness

scientific article published on 10 January 2006

Hydrolytic degradation of the resin-dentine interface induced by the simulated pulpal pressure, direct and indirect water ageing

scientific article published on 19 September 2012

Impact of hydrophilicity and length of spacer chains on the bonding of functional monomers

scientific article published on 30 June 2014

In-depth polymerization of dual-cured resin cement assessed by hardness

scientific article published on 14 January 2008

In-vivo evaluation of the surface roughness and morphology of enamel after bracket removal and polishing by different techniques.

scientific article

Influence of Light Source, Thermocycling and Silane on the Shear Bond Strength of Metallic Brackets to Ceramic

scientific article published on 01 November 2015

Influence of Thermal Cycles Number on Bond Strength of Metallic Brackets to Ceramic.

scientific article published on March 2017

Influence of Water Storage and Bonding Material on Bond Strength of Metallic Brackets to Ceramic.

scientific article published on October 2015

Influence of bioactive particles on the chemical-mechanical properties of experimental enamel resin infiltrants

scientific article published on 12 November 2016

Influence of different flask systems on tooth displacement and framework misfit in mandibular fixed implant-supported complete dentures ⬇️

scientific article published on June 15, 2013

Influence of nanogel additive hydrophilicity on dental adhesive mechanical performance and dentin bonding.

scientific article published on 21 September 2016

Inorganic particle analysis of dental impression elastomers.

scientific article published on January 2010

Light Activation and Thermocycling Methods on the Shear Bond Strength of Brackets Bonded to Porcelain Surfaces

scientific article published on 01 January 2020

Light-emitting Diode Beam Profile and Spectral Output Influence on the Degree of Conversion of Bulk Fill Composites.

scientific article

Luting glass ceramic restorations using a self-adhesive resin cement under different dentin conditions

scientific article published on May 2010

Physical-Mechanical Properties of Bulk Fill Composites Submitted to Biodegradation by Streptococcus mutans

scientific article published on 04 September 2020

Prolonged curing time reduces the effects of simulated pulpal pressure on the bond strength of one-step self-etch adhesives

scientific article published on 06 December 2012

Solubility and dimensional change after setting of root canal sealers: a proposal for smaller dimensions of test samples

scientific article published on 01 September 2007

Spectrophotometric evaluation of dental bleaching under orthodontic bracket in enamel and dentin

scientific article published on October 2014

The Combination of CQ-amine and TPO Increases the Polymerization Shrinkage Stress and Does Not Improve the Depth of Cure of Bulk-fill Composites

scientific article published on 31 January 2019

The Effect of Hydrofluoric Acid Concentration on the Bond Strength and Morphology of the Surface and Interface of Glass Ceramics to a Resin Cement.

scientific article published on 12 March 2015

The effect of combining photoinitiator systems on the color and curing profile of resin-based composites.

scientific article published on 25 July 2016

The role of spacer carbon chain in acidic functional monomers on the physicochemical properties of self-etch dental adhesives

scientific article published on 21 February 2014

Two methods to simulate intrapulpal pressure: effects upon bonding performance of self-etch adhesives

scientific article published on 09 January 2014

Paulina is supported by:

About Paulina

Help