List of works - Frederik C Krebs

"Hairy" poly(3-hexylthiophene) particles prepared via surface-initiated Kumada catalyst-transfer polycondensation

scientific article published in November 2009

25th anniversary article: Rise to power--OPV-based solar parks

scientific article published on 01 January 2014

A highly configurationally stable [4]heterohelicenium cation

scientific article published on 01 July 2003

A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions

article

A new versatile receptor platform

scientific article

A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules

article

A round robin study of polymer solar cells and small modules across China

scientific article published in October 2013

A simple nanostructured polymer/ZnO hybrid solar cell-preparation and operation in air.

scientific article

Aesthetically pleasing conjugated polymer:fullerene blends for blue-green solar cells via roll-to-roll processing.

scientific article published on 21 February 2012

Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes

scientific article published in 2015

All-Solution-Processed, Ambient Method for ITO-Free, Roll-Coated Tandem Polymer Solar Cells using Solution-Processed Metal Films

Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating.

scientific article

An Efficient Solution-Processed Intermediate Layer for Facilitating Fabrication of Organic Multi-Junction Solar Cells

scientific article published on 16 July 2013

An exceptional red shift of emission maxima upon fluorine substitution

scientific article published in October 2002

An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

article by Suren A. Gevorgyan et al published May 2011 in Solar Energy Materials and Solar Cells

Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods

scientific article published on 22 April 2011

Carbon: The Ultimate Electrode Choice for Widely Distributed Polymer Solar Cells

Combinedin situsmall- and wide-angle X-ray scattering studies of TiO2nanoparticle annealing to 1023 K

article published in 2010

Comparative Indoor and Outdoor Degradation of Organic Photovoltaic Cells via Inter-laboratory Collaboration

scientific article published on 23 December 2015

Conductance enhancement of InAs/InP heterostructure nanowires by surface functionalization with oligo(phenylene vinylene)s

scientific article published on 30 April 2013

Conjugated Polymers Via Direct Arylation Polymerization in Continuous Flow: Minimizing the Cost and Batch-to-Batch Variations for High-Throughput Energy Conversion

scientific article published on 13 October 2017

Consensus stability testing protocols for organic photovoltaic materials and devices

article

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

article

Cyclopolymerization-derived block-copolymers of 4,4-bis(octyloxymethyl)-1,6-heptadiyne with 4,4-dipropargyl malonodinitrile for use in photovoltaics

Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell ⬇️

scientific article published on 05 November 2010

Digital grayscale printing for patterned transparent conducting Ag electrodes and their applications in flexible electronics

Direct observation of sub-100 fs mobile charge generation in a polymer-fullerene film

scientific article published on 31 January 2012

Directional synthesis of a dye-linked conducting homopolymer

scientific article published in March 2003

Electrochromic displays: The new black

scientific article published on 01 October 2008

Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency

scientific article published on 27 March 2014

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

article

Ferromagnetic ordering in bis(benzene)chromium(+) Bis(4,5-dimethoxybenzene-1,2-dithiolato)nickel(-)

scientific article published on 01 March 2004

Flow Synthesis of Silver Nanowires for Semitransparent Solar Cell Electrodes: A Life Cycle Perspective.

scientific article published on 11 March 2016

From the bottom up--flexible solid state electrochromic devices

scientific article published on 05 September 2014

Generation of native polythiophene/PCBM composite nanoparticles via the combination of ultrasonic micronization of droplets and thermocleaving from aqueous dispersion

scientific article published on 02 November 2011

Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality.

scientific article published on September 2010

High-Volume Processed, ITO-Free Superstrates and Substrates for Roll-to-Roll Development of Organic Electronics.

scientific article published on 22 November 2014

High-throughput roll-to-roll X-ray characterization of polymer solar cell active layers

Highly Conformal Ni Micromesh as a Current Collecting Front Electrode for Reduced Cost Si Solar Cell

scientific article

Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3D nanoimaging.

scientific article

In situ electrical and thermal monitoring of printed electronics by two-photon mapping

scientific article

Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: Testing the ISOS tests

Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000h

OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools

article

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses – the ISOS-3 inter-laboratory collaboration

article

Organic photovoltaics

scientific article published on 6 November 2013

Outdoor Operational Stability of Indium-Free Flexible Polymer Solar Modules Over 1 Year Studied in India, Holland, and Denmark

scholarly article by Dechan Angmo et al published 25 March 2014 in Advanced Engineering Materials

Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia

article

Preparation and structural properties of 7,8-dioxa[6]helicenes and 7a,14c-dihydro-7,8-dioxa[6]helicenes

scientific article published on 01 January 2001

Reversible degradation of inverted organic solar cells by concentrated sunlight.

scientific article published in April 2011

Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability.

scientific article

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

scientific article published on 11 January 2011

Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules

scientific article published on 27 November 2015

Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

article

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

scientific article

Solution and vapour deposited lead perovskite solar cells: Ecotoxicity from a life cycle assessment perspective

scholarly article by Nieves Espinosa et al published June 2015 in Solar Energy Materials and Solar Cells

Solution processed large area fabrication of Ag patterns as electrodes for flexible heaters, electrochromics and organic solar cells

Stability of polymer solar cells.

scientific article published on 29 December 2011

Stability/degradation of polymer solar cells

Stepwise and directional synthesis of end-functionalized single-oligomer OPVs and their application in organic solar cells

scientific article (publication date: October 2004)

Stepwise unidirectional synthesis of oligo phenylene vinylenes with a series of monomers. Use in plastic solar cells

scientific article published in July 2005

Structural study of four complexes of theM-N2S2type derived from diethylphenylazothioformamide and the metals palladium, platinum, copper and nickel

scientific article published on 15 January 2007

Study of hybrid solar cells made of multilayer nanocrystalline titania and poly(3-octylthiophene) or poly-(3-(2-methylhex-2-yl)-oxy-carbonyldithiophene).

scientific article published on 6 November 2009

Synthesis and Self-Assembly of Donor–Acceptor–Donor Based Oligothiophenes and Their Optoelectronic Properties

Synthesis and structural characterization of new stiff rod oligomeric domains by X-ray crystallography and NMR.

scientific article published in October 2002

Synthesis of a Triazatriangulenium Salt

scientific article published on 01 October 2000

Synthesis of an all-in-one molecule (for organic solar cells).

scientific article published in July 2006

Synthesis, structure, and properties of 4,7-dimethoxybenzo[c]tellurophene: a molecular pyroelectric material

scientific article published on 01 August 2006

Synthesis, structure, and properties of azatriangulenlenium salts

scientific article

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices--the ISOS-3 inter-laboratory collaboration.

scientific article published on 25 July 2012

The solar textile challenge: how it will not work and where it might

scientific article published on 11 February 2015

The use of polyurethane as encapsulating method for polymer solar cells—An inter laboratory study on outdoor stability in 8 countries

article by Roar R. Søndergaard et al published April 2012 in Solar Energy Materials and Solar Cells

Thermocleavable materials for polymer solar cells with high open circuit voltage-a comparative study.

scientific article published in December 2009

Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials

scientific article published in 2013

Towards large-scale production of solution-processed organic tandem modules based on ternary composites: Design of the intermediate layer, device optimization and laser based module processing

scientific article published in January 2014

Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating

scientific article published on 01 October 2010

Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes

scientific article published on 19 June 2015

Upscaling of polymer solar cell fabrication using full roll-to-roll processing.

scientific article

List of works by Frederik C Krebs

"Hairy" poly(3-hexylthiophene) particles prepared via surface-initiated Kumada catalyst-transfer polycondensation

25th anniversary article: Rise to power--OPV-based solar parks

A highly configurationally stable [4]heterohelicenium cation

A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions

A new versatile receptor platform

A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules

A round robin study of polymer solar cells and small modules across China

A simple nanostructured polymer/ZnO hybrid solar cell-preparation and operation in air.

Aesthetically pleasing conjugated polymer:fullerene blends for blue-green solar cells via roll-to-roll processing.

Air-processed organic tandem solar cells on glass: toward competitive operating lifetimes

All-Solution-Processed, Ambient Method for ITO-Free, Roll-Coated Tandem Polymer Solar Cells using Solution-Processed Metal Films

Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating.

An Efficient Solution-Processed Intermediate Layer for Facilitating Fabrication of Organic Multi-Junction Solar Cells

An exceptional red shift of emission maxima upon fluorine substitution

An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules

Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods

Carbon: The Ultimate Electrode Choice for Widely Distributed Polymer Solar Cells

Combinedin situsmall- and wide-angle X-ray scattering studies of TiO2nanoparticle annealing to 1023 K

Comparative Indoor and Outdoor Degradation of Organic Photovoltaic Cells via Inter-laboratory Collaboration

Conductance enhancement of InAs/InP heterostructure nanowires by surface functionalization with oligo(phenylene vinylene)s

Conjugated Polymers Via Direct Arylation Polymerization in Continuous Flow: Minimizing the Cost and Batch-to-Batch Variations for High-Throughput Energy Conversion

Consensus stability testing protocols for organic photovoltaic materials and devices

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

Cyclopolymerization-derived block-copolymers of 4,4-bis(octyloxymethyl)-1,6-heptadiyne with 4,4-dipropargyl malonodinitrile for use in photovoltaics

Degradation Patterns in Water and Oxygen of an Inverted Polymer Solar Cell ⬇️

Digital grayscale printing for patterned transparent conducting Ag electrodes and their applications in flexible electronics

Direct observation of sub-100 fs mobile charge generation in a polymer-fullerene film

Directional synthesis of a dye-linked conducting homopolymer

Electrochromic displays: The new black

Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency

Fabrication and processing of polymer solar cells: A review of printing and coating techniques

Ferromagnetic ordering in bis(benzene)chromium(+) Bis(4,5-dimethoxybenzene-1,2-dithiolato)nickel(-)

Flow Synthesis of Silver Nanowires for Semitransparent Solar Cell Electrodes: A Life Cycle Perspective.

From the bottom up--flexible solid state electrochromic devices

Generation of native polythiophene/PCBM composite nanoparticles via the combination of ultrasonic micronization of droplets and thermocleaving from aqueous dispersion

Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality.

High-Volume Processed, ITO-Free Superstrates and Substrates for Roll-to-Roll Development of Organic Electronics.

High-throughput roll-to-roll X-ray characterization of polymer solar cell active layers

Highly Conformal Ni Micromesh as a Current Collecting Front Electrode for Reduced Cost Si Solar Cell

Improving organic tandem solar cells based on water-processed nanoparticles by quantitative 3D nanoimaging.

In situ electrical and thermal monitoring of printed electronics by two-photon mapping

Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: Testing the ISOS tests

Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000h

OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools

On the stability of a variety of organic photovoltaic devices by IPCE and in situ IPCE analyses – the ISOS-3 inter-laboratory collaboration

Organic photovoltaics

Outdoor Operational Stability of Indium-Free Flexible Polymer Solar Modules Over 1 Year Studied in India, Holland, and Denmark

Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia

Preparation and structural properties of 7,8-dioxa[6]helicenes and 7a,14c-dihydro-7,8-dioxa[6]helicenes

Reversible degradation of inverted organic solar cells by concentrated sunlight.

Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability.

Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement

Roll-to-roll printed silver nanowires for increased stability of flexible ITO-free organic solar cell modules

Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules

Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules

Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes.

Solution and vapour deposited lead perovskite solar cells: Ecotoxicity from a life cycle assessment perspective

Solution processed large area fabrication of Ag patterns as electrodes for flexible heaters, electrochromics and organic solar cells

Stability of polymer solar cells.

Stability/degradation of polymer solar cells

Stepwise and directional synthesis of end-functionalized single-oligomer OPVs and their application in organic solar cells

Stepwise unidirectional synthesis of oligo phenylene vinylenes with a series of monomers. Use in plastic solar cells

Structural study of four complexes of theM-N2S2type derived from diethylphenylazothioformamide and the metals palladium, platinum, copper and nickel

Study of hybrid solar cells made of multilayer nanocrystalline titania and poly(3-octylthiophene) or poly-(3-(2-methylhex-2-yl)-oxy-carbonyldithiophene).

Synthesis and Self-Assembly of Donor–Acceptor–Donor Based Oligothiophenes and Their Optoelectronic Properties

Synthesis and structural characterization of new stiff rod oligomeric domains by X-ray crystallography and NMR.

Synthesis of a Triazatriangulenium Salt

Synthesis of an all-in-one molecule (for organic solar cells).

Synthesis, structure, and properties of 4,7-dimethoxybenzo[c]tellurophene: a molecular pyroelectric material

Synthesis, structure, and properties of azatriangulenlenium salts

TOF-SIMS investigation of degradation pathways occurring in a variety of organic photovoltaic devices--the ISOS-3 inter-laboratory collaboration.

The solar textile challenge: how it will not work and where it might

The use of polyurethane as encapsulating method for polymer solar cells—An inter laboratory study on outdoor stability in 8 countries

Thermocleavable materials for polymer solar cells with high open circuit voltage-a comparative study.

Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials

Towards large-scale production of solution-processed organic tandem modules based on ternary composites: Design of the intermediate layer, device optimization and laser based module processing

Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating

Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes

Upscaling of polymer solar cell fabrication using full roll-to-roll processing.