List of works - Renato Seeber

3-Methylthiophene Self-Assembled Monolayers on Planar and Nanoparticle Au Surfaces

scientific article published on 01 October 2005

A UV–Visible/Raman spectroelectrochemical study of the stability of poly(3,4-ethylendioxythiophene) films

A poly(3,4-ethylenedioxythiophene)-poly(styrene sulphonate) composite electrode coating in the electrooxidation of phenol

article published in 2005

A study of the dielectric behaviour and the liquid structure of a ternary solvent system

scientific article published in March 2004

Adsorption geometry variation of 1,4-benzenedimethanethiol self-assembled monolayers on Au(111) grown from the vapor phase

scientific article published in April 2008

Amperometric sensing--bioelectroanalysis.

scientific article published in April 2013

Amperometric sensing. A melting pot for material, electrochemical, and analytical sciences

Amperometric sensors based on poly(3,4-ethylenedioxythiophene)-modified electrodes: discrimination of white wines

scientific article

Au/Pt nanoparticle systems in methanol and carbon monoxide electroxidation

Behaviour of Ti electrode in the amperometric determination of high concentrations of strong oxidising species

Bonding and orientation of 1,4-benzenedimethanethiol on Au(111) prepared from solution and from gas phase

Carbon Black/Gold Nanoparticles Composite for Efficient Amperometric Sensors

Classification of red wines by chemometric analysis of voltammetric signals from PEDOT-modified electrodes

scientific article published on 31 March 2009

Composite PEDOT/Au Nanoparticles Modified Electrodes for Determination of Mercury at Trace Levels by Anodic Stripping Voltammetry

Composite electrode coatings in amperometric sensors. Effects of differently encapsulated gold nanoparticles in poly(3,4-ethylendioxythiophene) system

Development and characterisation of a novel composite electrode material consisting of poly(3,4-ethylenedioxythiophene) including Au nanoparticles

article

Development of Nanostructured Electrode Coatings for Amperometric Sensors

article

Development of a gold-nanostructured surface for amperometric genosensors

article

Development of a redox polymer based on poly(2-hydroxyethyl methacrylate) for disposable amperometric sensors

Development of a sensor system for the determination of sanitary quality of grapes

scientific article published on 8 April 2013

Development of an Electrochemical Sensor for NADH Determination Based on a Caffeic Acid Redox Mediator Supported on Carbon Black

scientific article published in 2015

Development of an electronic tongue based on a PEDOT-modified voltammetric sensor

scientific article

Differential Pulse Techniques on Modified Conventional-Size and Microelectrodes. Electroactivity of Poly[4,4′-bis(butylsulfanyl)-2,2′-bithiophene] Coating Towards Dopamine and Ascorbic Acid Oxidation

scholarly article by S. Lupu et al published June 2003 in Electroanalysis

EQCM study of the p- and n-doping processes of a poly[4,4′-bis(butylsulphanyl)-2,2′-bithiophene]

Effective catalytic electrode system based on polyviologen and Au nanoparticles multilayer

Effective electrochemical sensor based on screen-printed electrodes modified with a carbon black-Au nanoparticles composite

Electro-oxidation of chlorophenols on poly(3,4-ethylenedioxythiophene)-poly(styrene sulphonate) composite electrode

article by L. Pigani et al published January 2007 in Electrochimica Acta

Electrocatalytic activity of cobalt phthalocyanine stabilized by different matrixes.

scientific article published on 18 October 2002

Electrochemical and spectroelectrochemical characterisation of poly(3′-hydroxymethyl-2,2′:5′,2″-terthiophene)

Electrochemical preparation and characterisation of bilayer films composed by Prussian Blue and conducting polymer

Electrochemical, spectroscopic and microscopic characterisation of novel poly(3,4-ethylenedioxythiophene)/gold nanoparticles composite materials

Electrochemistry of Electroactive Materials

scientific article published in March 2014

Electroreduction of Chloramines Through Novel Electrode Materials

Erratum to “Electrochemical, spectroscopic and microscopic characterisation of novel poly(3,4-ethylenedioxythiopene)/gold nanoparticles composite materials” [Journal of Electroanalytical Chemistry 619–620 (2008) 75–82]

scholarly article published in Journal of Electroanalytical Chemistry

Graphene-modified electrode. Determination of hydrogen peroxide at high concentrations

scientific article published on 3 January 2013

Homoleptic Ru(II) complex with terpyridine ligands appended with terthiophene moieties: Synthesis, characterization and electropolymerization

Influence of the nature of the supporting electrolyte on the formation of poly[4,4′-bis(butylsulphanyl)-2,2′-bithiophene] films. A role for both counter-ion and co-ion in the polymer growth and p-doping processes

Layer-by-layer deposition of a polythiophene/Au nanoparticles multilayer with effective electrochemical properties

Multicomponent analysis of electrochemical signals in the wavelet domain

scientific article published on 01 March 2003

Novel electrode systems for amperometric sensing: the case of titanium

scholarly article published 4 November 2014

Palladium(II) derivatives of alkylsulfanyl substituted thiophenes as precursors of inorganic polymers: Spectroscopic, electrochemical investigations and X-ray crystal structure of trans-PdCl2[3-(butylsulfanyl)thiophene]2

Poly(3,4-ethylenedioxythiophene)/Au-nanoparticles composite as electrode coating suitable for electrocatalytic oxidation

Polythiophene Derivative Conducting Polymer Modified Electrodes and Microelectrodes for Determination of Ascorbic Acid. Effect of Possible Interferents

Polythiophenes and polythiophene-based composites in amperometric sensing

scientific article published on September 2012

Preparation and Characterization of a Redox Multilayer Film Containing Au Nanoparticles

Radical ions from 3,3''',3''''-tris(butylsulfanyl)- 2,2':5',2'':5'',2''',5''',2'''':5'''',2'''''-sexithiophene: an experimental and theoretical study of the p- and n-doped oligomer

scientific article

Structure and properties of 1,4-benzenedimethanethiol films grown from solution on Au(111): An XPS and NEXAFS study

Studies of the interface of conducting polymers with inorganic surfaces.

scientific article published on December 2012

Study of Ultrathin Prussian Blue Films Using in situ Electrochemical Surface Plasmon Resonance

Synthesis and electrochemical characterisation of novel sonogel–carbon–polythiophene microstructured electrodes

Synthesis and electrochemical polymerisation of 3′-functionalised terthiophenes

Synthesis and spectroscopic and electrochemical characterisation of a conducting polythiophene bearing a chiral beta-substituent: polymerisation of (+)-4,4 bi.

scientific article published in February 2001

The effect of Pd(ii) coordination on the properties of an alkylsulfanyl substituted polythiophene. Comparison with the corresponding monomer

Ti metal electrode as an unconventional amperometric sensor for determination of Au(III) species

scientific article published on 19 October 2014

UPS, XPS, and NEXAFS Study of Self-Assembly of Standing 1,4-Benzenedimethanethiol SAMs on Gold

scientific article published on 15 March 2011

Viscosity of (ethane-1,2-diol + 1,2-dimethoxyethane + water) at temperatures from 263.15 K to 353.15 K

Voltammetric behaviour of Cu alloys toward hydrogen peroxide and organic species

Water-soluble full-length single-wall carbon nanotube polyelectrolytes: preparation and characterization

scientific article published on 01 May 2005

List of works by Renato Seeber

3-Methylthiophene Self-Assembled Monolayers on Planar and Nanoparticle Au Surfaces

A UV–Visible/Raman spectroelectrochemical study of the stability of poly(3,4-ethylendioxythiophene) films

A poly(3,4-ethylenedioxythiophene)-poly(styrene sulphonate) composite electrode coating in the electrooxidation of phenol

A study of the dielectric behaviour and the liquid structure of a ternary solvent system

Adsorption geometry variation of 1,4-benzenedimethanethiol self-assembled monolayers on Au(111) grown from the vapor phase

Amperometric sensing--bioelectroanalysis.

Amperometric sensing. A melting pot for material, electrochemical, and analytical sciences

Amperometric sensors based on poly(3,4-ethylenedioxythiophene)-modified electrodes: discrimination of white wines

Au/Pt nanoparticle systems in methanol and carbon monoxide electroxidation

Behaviour of Ti electrode in the amperometric determination of high concentrations of strong oxidising species

Bonding and orientation of 1,4-benzenedimethanethiol on Au(111) prepared from solution and from gas phase

Carbon Black/Gold Nanoparticles Composite for Efficient Amperometric Sensors

Classification of red wines by chemometric analysis of voltammetric signals from PEDOT-modified electrodes

Composite PEDOT/Au Nanoparticles Modified Electrodes for Determination of Mercury at Trace Levels by Anodic Stripping Voltammetry

Composite electrode coatings in amperometric sensors. Effects of differently encapsulated gold nanoparticles in poly(3,4-ethylendioxythiophene) system

Development and characterisation of a novel composite electrode material consisting of poly(3,4-ethylenedioxythiophene) including Au nanoparticles

Development of Nanostructured Electrode Coatings for Amperometric Sensors

Development of a gold-nanostructured surface for amperometric genosensors

Development of a redox polymer based on poly(2-hydroxyethyl methacrylate) for disposable amperometric sensors

Development of a sensor system for the determination of sanitary quality of grapes

Development of an Electrochemical Sensor for NADH Determination Based on a Caffeic Acid Redox Mediator Supported on Carbon Black

Development of an electronic tongue based on a PEDOT-modified voltammetric sensor

Differential Pulse Techniques on Modified Conventional-Size and Microelectrodes. Electroactivity of Poly[4,4′-bis(butylsulfanyl)-2,2′-bithiophene] Coating Towards Dopamine and Ascorbic Acid Oxidation

EQCM study of the p- and n-doping processes of a poly[4,4′-bis(butylsulphanyl)-2,2′-bithiophene]

Effective catalytic electrode system based on polyviologen and Au nanoparticles multilayer

Effective electrochemical sensor based on screen-printed electrodes modified with a carbon black-Au nanoparticles composite

Electro-oxidation of chlorophenols on poly(3,4-ethylenedioxythiophene)-poly(styrene sulphonate) composite electrode

Electrocatalytic activity of cobalt phthalocyanine stabilized by different matrixes.

Electrochemical and spectroelectrochemical characterisation of poly(3′-hydroxymethyl-2,2′:5′,2″-terthiophene)

Electrochemical preparation and characterisation of bilayer films composed by Prussian Blue and conducting polymer

Electrochemical, spectroscopic and microscopic characterisation of novel poly(3,4-ethylenedioxythiophene)/gold nanoparticles composite materials

Electrochemistry of Electroactive Materials

Electroreduction of Chloramines Through Novel Electrode Materials

Erratum to “Electrochemical, spectroscopic and microscopic characterisation of novel poly(3,4-ethylenedioxythiopene)/gold nanoparticles composite materials” [Journal of Electroanalytical Chemistry 619–620 (2008) 75–82]

Graphene-modified electrode. Determination of hydrogen peroxide at high concentrations

Homoleptic Ru(II) complex with terpyridine ligands appended with terthiophene moieties: Synthesis, characterization and electropolymerization

Influence of the nature of the supporting electrolyte on the formation of poly[4,4′-bis(butylsulphanyl)-2,2′-bithiophene] films. A role for both counter-ion and co-ion in the polymer growth and p-doping processes

Layer-by-layer deposition of a polythiophene/Au nanoparticles multilayer with effective electrochemical properties

Multicomponent analysis of electrochemical signals in the wavelet domain

Novel electrode systems for amperometric sensing: the case of titanium

Palladium(II) derivatives of alkylsulfanyl substituted thiophenes as precursors of inorganic polymers: Spectroscopic, electrochemical investigations and X-ray crystal structure of trans-PdCl2[3-(butylsulfanyl)thiophene]2

Poly(3,4-ethylenedioxythiophene)/Au-nanoparticles composite as electrode coating suitable for electrocatalytic oxidation

Polythiophene Derivative Conducting Polymer Modified Electrodes and Microelectrodes for Determination of Ascorbic Acid. Effect of Possible Interferents

Polythiophenes and polythiophene-based composites in amperometric sensing

Preparation and Characterization of a Redox Multilayer Film Containing Au Nanoparticles

Radical ions from 3,3''',3''''-tris(butylsulfanyl)- 2,2':5',2'':5'',2''',5''',2'''':5'''',2'''''-sexithiophene: an experimental and theoretical study of the p- and n-doped oligomer

Structure and properties of 1,4-benzenedimethanethiol films grown from solution on Au(111): An XPS and NEXAFS study

Studies of the interface of conducting polymers with inorganic surfaces.

Study of Ultrathin Prussian Blue Films Using in situ Electrochemical Surface Plasmon Resonance

Synthesis and electrochemical characterisation of novel sonogel–carbon–polythiophene microstructured electrodes

Synthesis and electrochemical polymerisation of 3′-functionalised terthiophenes

Synthesis and spectroscopic and electrochemical characterisation of a conducting polythiophene bearing a chiral beta-substituent: polymerisation of (+)-4,4 bi.

The effect of Pd(ii) coordination on the properties of an alkylsulfanyl substituted polythiophene. Comparison with the corresponding monomer

Ti metal electrode as an unconventional amperometric sensor for determination of Au(III) species

UPS, XPS, and NEXAFS Study of Self-Assembly of Standing 1,4-Benzenedimethanethiol SAMs on Gold

Viscosity of (ethane-1,2-diol + 1,2-dimethoxyethane + water) at temperatures from 263.15 K to 353.15 K

Voltammetric behaviour of Cu alloys toward hydrogen peroxide and organic species

Water-soluble full-length single-wall carbon nanotube polyelectrolytes: preparation and characterization

p- and n-doping processes in polythiophene with reduced bandgap. An electrochemical impedance spectroscopy study