Search filters

List of works by Peter Varga

3D Raman mapping of the collagen fibril orientation in human osteonal lamellae

scientific article

A cadaveric biomechanical study comparing the ease of femoral nail insertion: 1.0- vs 1.5-m bow designs

scientific article published on 3 April 2017

A calibration methodology of QCT BMD for human vertebral body with registered micro-CT images ⬇️

scientific article published on May 1, 2011

A finite element analysis of two novel screw designs for scaphoid waist fractures

scientific article published on 2 December 2015

A nonlinear finite element model validation study based on a novel experimental technique for inducing anterior wedge-shape fractures in human vertebral bodies in vitro

scientific article published on 11 May 2010

A patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads

scientific article

Accessing osteocyte lacunar geometrical properties in human jaw bone on the submicron length scale using synchrotron radiation μCT.

scientific article published on 8 July 2014

Alterations of mass density and 3D osteocyte lacunar properties in bisphosphonate-related osteonecrotic human jaw bone, a synchrotron µCT study

scientific article

An improved technique for inducing compression fractures of vertebral bodies in vitro

article published in 2009

Assessment of volume fraction and fabric in the distal radius using HR-pQCT.

scientific article published on 14 July 2009

Biomechanical comparison of plate and screw fixation in anterior pelvic ring fractures with low bone mineral density

scientific article

Biomechanical evaluation of retrograde docking nailing to a total hip arthroplasty stem in a periprosthetic femur fracture model

scientific article published on 19 October 2020

Biomechanical investigation of two long bone growth modulation techniques by finite element simulations

scientific article published on 4 October 2017

Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage

scientific article published on 09 May 2011

Canalicular network morphology is the major determinant of the spatial distribution of mass density in human bone tissue: evidence by means of synchrotron radiation phase-contrast nano-CT.

scientific article published in February 2015

Cathepsin S controls adipocytic and osteoblastic differentiation, bone turnover, and bone microarchitecture

scientific article published on 26 April 2014

Cement augmentation of calcar screws may provide the greatest reduction in predicted screw cut-out risk for proximal humerus plating based on validated parametric computational modelling: Augmenting proximal humerus fracture plating

scientific article published on 03 September 2020

Characterizing microcrack orientation distribution functions in osteonal bone samples.

scientific article published on 15 July 2016

Distribution of mesoscale elastic properties and mass density in the human femoral shaft

scientific article

Elasticity-density and viscoelasticity-density relationships at the tibia mid-diaphysis assessed from resonant ultrasound spectroscopy measurements

scientific article

Fatigue failure of plated osteoporotic proximal humerus fractures is predicted by the strain around the proximal screws

article

Finite element analysis for prediction of bone strength

scientific article published on 07 August 2013

Finite element analysis of bone strength in osteogenesis imperfecta

scientific article published on 22 January 2020

Finite element based estimation of contact areas and pressures of the human scaphoid in various functional positions of the hand

scientific article published on 6 February 2013

Finite element models of human radius slices can accurately predict Colles' fracture load

Full-Field Calcium K-Edge X-ray Absorption Near-Edge Structure Spectroscopy on Cortical Bone at the Micron-Scale: Polarization Effects Reveal Mineral Orientation

scientific article published on 9 March 2016

HR-pQCT based FE analysis of the most distal radius section provides an improved prediction of Colles' fracture load in vitro ⬇️

scientific article published on August 6, 2010

HR-pQCT-based homogenised finite element models provide quantitative predictions of experimental vertebral body stiffness and strength with the same accuracy as μFE models ⬇️

scientific article published on May 24, 2011

Histogram feature-based classification improves differentiability of early bone healing stages from micro-computed tomographic data

scientific article

Impact of microscale properties measured by 50-MHz acoustic microscopy on mesoscale elastic and ultimate mechanical cortical bone properties

Implicit modeling of screw threads for efficient finite element analysis of complex bone-implant systems.

scientific article published on 26 April 2016

Importance of locking plate positioning in proximal humeral fractures as predicted by computer simulations

scientific article published on 20 March 2019

Improvements in Vertebral Body Strength Under Teriparatide Treatment Assessed In Vivo by Finite Element Analysis: Results From the EUROFORS Study

article

Increased bone resorption and impaired bone microarchitecture in short-term and extended high-fat diet–induced obesity

scientific article published on 20 February 2010

Investigation of the three-dimensional orientation of mineralized collagen fibrils in human lamellar bone using synchrotron X-ray phase nano-tomography.

scientific article published on 23 May 2013

Lathyrism-induced alterations in collagen cross-links influence the mechanical properties of bone material without affecting the mineral

scientific article published on 2 September 2011

Multimodal correlative investigation of the interplaying micro-architecture, chemical composition and mechanical properties of human cortical bone tissue reveals predominant role of fibrillar organization in determining microelastic tissue propertie

scientific article published on 3 August 2016

Multiscale, converging defects of macro-porosity, microstructure and matrix mineralization impact long bone fragility in NF1.

scientific article

New approaches for cement-based prophylactic augmentation of the osteoporotic proximal femur provide enhanced reinforcement as predicted by non-linear finite element simulations.

scientific article published on 2 March 2017

Nonlinear quasi-static finite element simulations predict in vitro strength of human proximal femora assessed in a dynamic sideways fall setup.

scientific article published on 3 December 2015

OPG-Fc treatment in growing pigs leads to rapid reductions in bone resorption markers, serum calcium, and bone formation markers

scientific article

On the elastic properties of mineralized turkey leg tendon tissue: multiscale model and experiment

article

Osteoblast- and T cell-mediated RANKL expression does not contribute to age-related osteoclastogenesis in a murine model

Prophylactic augmentation of the osteoporotic proximal femur-mission impossible?

scientific article published on 07 December 2016

Prophylactic vertebroplasty versus kyphoplasty in osteoporosis: A comprehensive biomechanical matched-pair study by in vitro compressive testing

scientific article published on 04 February 2019

QCT-based finite element models predict human vertebral strength in vitro significantly better than simulated DEXA

article

Rotational Stability of Scaphoid Osteosyntheses: An In Vitro Comparison of Small Fragment Cannulated Screws to Novel Bone Screw Sets

scientific article

Sampling Sphere Orientation Distribution: an efficient method to quantify trabecular bone fabric on grayscale images

scientific article published on 6 March 2009

Screw configuration in proximal humerus plating has a significant impact on fixation failure risk predicted by finite element models

scientific article published on 26 April 2019

Secondary Perforation Risk in Plate Osteosynthesis of Unstable Proximal Humerus Fractures: A Biomechanical Investigation of the Effect of Screw Length

scientific article published on 08 August 2019

Synchrotron X-ray phase nano-tomography-based analysis of the lacunar-canalicular network morphology and its relation to the strains experienced by osteocytes in situ as predicted by case-specific finite element analysis.

scientific article published on 11 July 2014

The influence of screw length on predicted cut-out failures for proximal humeral fracture fixations predicted by finite element simulations

scientific article published on 20 March 2019

The prediction of cyclic proximal humerus fracture fixation failure by various bone density measures

scientific article published on 22 February 2018

The skeleton of multiparous sows is protected from effects of ovariectomy and calcium deprivation

Ultrasound palpation for fast in-situ quantification of articular cartilage stiffness, thickness and relaxation capacity

scientific article published on 16 February 2017

Ultrasound to assess bone quality

scientific article published in June 2014

Validated computational framework for efficient systematic evaluation of osteoporotic fracture fixation in the proximal humerus

scholarly article by Peter Varga et al published July 2018 in Medical Engineering and Physics

Validation of an HR-pQCT-based homogenized finite element approach using mechanical testing of ultra-distal radius sections

scientific article published on 5 August 2010

Validation of an anatomy specific finite element model of Colles’ fracture

article

Vertebral strength prediction with an increased QCT resolution: Densitometry versus FEA

Where is the distal fracture line location of dorsally displaced distal radius fractures?

scientific article published on 26 October 2010

Paulina is supported by:

About Paulina

Help