Search filters

List of works by Bogna Stawarczyk

3D-printed material for temporary restorations: impact of print layer thickness and post-curing method on degree of conversion

scientific article published on 01 January 2019

A novel CAD/CAM base metal compared to conventional CoCrMo alloys: an in-vitro study of the long-term metal-ceramic bond strength

scientific article

Accuracy of Digitally Fabricated Wax Denture Bases and Conventional Completed Complete Dentures.

scientific article

Accuracy of digitally fabricated trial dentures

scientific article published on 29 September 2017

Accuracy of mechanical torque-limiting gauges for mini-screw placement

scientific article published on 03 May 2010

Adhesion of veneering resins to polymethylmethacrylate-based CAD/CAM polymers after various surface conditioning methods

scientific article

Adhesive performance of a caries infiltrant on sound and demineralised enamel

scientific article published on 17 October 2010

Are self-adhesive resin cements a valid alternative to conventional resin cements? A laboratory study of the long-term bond strength

scientific article published on 20 September 2012

Bending moments and types of failure of zirconia and titanium abutments with internal implant-abutment connections: a laboratory study

scientific article published on 01 May 2012

Bending moments of zirconia and titanium abutments with internal and external implant-abutment connections after aging and chewing simulation

scientific article published on 28 March 2011

Bending moments of zirconia and titanium implant abutments supporting all-ceramic crowns after aging

scientific article published on 4 June 2013

Biaxial flexural strength of zirconia: A round robin test with 12 laboratories

scientific article published on 21 December 2020

Bond strength between a high-performance thermoplastic and a veneering resin

scientific article published on 21 January 2020

Bond strength of CAD-CAM and conventional veneering materials to different frameworks

scientific article published on 11 May 2020

Bonding Behaviour of Polyetherketoneketone to Methylmethacrylate- and Dimethacrylate-based Polymers

scientific article published on 28 August 2017

Bonding between CAD/CAM resin and resin composite cements dependent on bonding agents: three different in vitro test methods

scientific article

Bonding of composite resins to PEEK: the influence of adhesive systems and air-abrasion parameters

scientific article

Bonding to Different PEEK Compositions: The Impact of Dental Light Curing Units

scientific article

Bonding to new CAD/CAM resin composites: influence of air abrasion and conditioning agents as pretreatment strategy

scientific article published on 27 April 2018

Color change of CAD-CAM materials and composite resin cements after thermocycling

scientific article published on 25 April 2018

Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering

scientific article published on 06 August 2020

Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear

scientific article published on 23 December 2015

Comparison of fracture loads of CAD/CAM and conventionally fabricated temporary fixed dental prostheses after different aging regimens

scientific article

Comparison of fracture toughness measurements for zirconia materials using two test methods

scientific article published on 22 August 2019

Comparison of mechanical properties of different reinforced glass-ceramics

scientific article published on 06 November 2020

Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters

scientific article published on 27 November 2019

Compatibility of machined Ce-TZP/Al2O3 nanocomposite and a veneering ceramic

scientific article published on 21 March 2007

Complete denture fabrication supported by CAD/CAM.

scientific article

Different PEEK qualities irradiated with light of different wavelengths: Impact on Martens hardness

scientific article

Different polishing methods for zirconia: impact on surface, optical, and mechanical properties

scientific article published on 18 May 2019

Different surface modifications combined with universal adhesives: the impact on the bonding properties of zirconia to composite resin cement

scientific article published on 12 February 2019

Discoloration of PMMA, composite, and PEEK.

scientific article published on 25 June 2016

Discoloration of manually fabricated resins and industrially fabricated CAD/CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing

scientific article published on 14 May 2012

Effect of Astringent Products on Accuracy of Polyether Impressions and Plaster Casts

scientific article published on 01 May 2019

Effect of Cleaning Protocol on Bond Strength between Resin Composite Cement and Three Different CAD/CAM Materials

scientific article published on 18 September 2020

Effect of Dentin Bonding Agents, Various Resin Composites and Curing Modes on Bond Strength to Human Dentin

scientific article published on 17 October 2019

Effect of caries infiltrant application on shear bond strength of different adhesive systems to sound and demineralized enamel

scientific article published on 01 December 2012

Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials

scientific article published on 01 January 2013

Effect of different cleaning methods of polyetheretherketone on surface roughness and surface free energy properties

scientific article published on 2 June 2016

Effect of different surface pre-treatments and luting materials on shear bond strength to PEEK.

scientific article published on 5 March 2010

Effect of different surface pretreatments and adhesives on the load-bearing capacity of veneered 3-unit PEEK FDPs

scientific article published on 3 September 2015

Effect of high-speed sintering on the flexural strength of hydrothermal and thermo-mechanically aged zirconia materials

scientific article published on 30 June 2020

Effect of storage medium and aging duration on mechanical properties of self-adhesive resin-based cements.

scientific article published on 24 May 2017

Effect of sulfuric acid etching of polyetheretherketone on the shear bond strength to resin cements

scientific article published in October 2014

Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements

scientific article published in February 2012

Effect of thermal misfit between different veneering ceramics and zirconia frameworks on in vitro fracture load of single crowns.

scientific article published in November 2007

Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites

scientific article published in May 2008

Effects of different chlorhexidine pretreatments on adhesion of metal brackets in vitro

scientific article published on 28 December 2012

Effects of differing thickness and mechanical properties of cement on the stress levels and distributions in a three-unit zirconia fixed prosthesis by FEA.

scientific article

Efficiency of different repair kits on bonding to aged dental resin composite substrates

Evaluation of bond strength of resin cements using different general-purpose statistical software packages for two-parameter Weibull statistics

scientific article published on May 6, 2012

Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics

scientific article published on 6 February 2012

Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites

scientific article published on 19 October 2015

Evaluation of modern bioactive restoratives for bulk-fill placement.

scientific article published on 7 April 2016

Evaluation of translucency, Marten's hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials

scientific article published on 29 November 2020

Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization--a laboratory study

scientific article published on 9 February 2014

Flexural Strength of Preheated Resin Composites and Bonding Properties to Glass-Ceramic and Dentin

scientific article published on 29 January 2016

Flexural strength and fracture toughness of two different lithium disilicate ceramics

scientific article published on 19 December 2019

Flexural strength of veneering ceramics for zirconia

scientific article

Flexural strength, fracture toughness, and translucency of cubic/tetragonal zirconia materials

scientific article published on 25 May 2018

Flexural strength, fracture toughness, three-body wear, and Martens parameters of pressable lithium-X-silicate ceramics

scientific article published on 30 January 2020

Fracture Load of Veneered Telescopic Secondary Crowns Made of High-Performance Polymer on Zirconia Primary Crowns: Impact of Veneering Technique

scientific article published on 01 May 2020

Fracture load and chewing simulation of zirconia and stainless-steel crowns for primary molars

scientific article published on 10 July 2019

Fracture load and failure analysis of zirconia single crowns veneered withpressed and layered ceramics after chewing simulation

scientific article published on 21 July 2011

Fracture load and failure types of different veneered polyetheretherketone fixed dental prostheses

scientific article

Fracture load of 3D printed PEEK inlays compared with milled ones, direct resin composite fillings, and sound teeth

scientific article published on 27 January 2020

Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study

scientific article published on 24 May 2019

Fracture load of milled polymeric fixed dental prostheses as a function of connector cross-sectional areas

scientific article published in October 2013

Fracture resistance and 2-body wear of 3-dimensional–printed occlusal devices

scientific article published on 29 June 2018

Fracture resistance of endodontically treated teeth without ferrule using a novel H-shaped short post

scientific article published on February 2015

Glass Fiber Post/Composite Core Systems Bonded to Human Dentin: Analysis of Tensile Load vs Calculated Tensile Strength of Various Systems Using Pull-out Tests

scientific article

Glycine: A potential coupling agent to bond to helium plasma treated PEEK?

scientific article

Hemostatic gingival retraction agents and their impact on prosthodontic treatment steps: A narrative review

scientific article published on 01 January 2018

Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study

scientific article published on 19 February 2011

Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation

scientific article

Impact of artificial aging by thermocycling on edge chipping resistance and Martens hardness of different dental CAD-CAM restorative materials

scientific article published on 27 February 2020

Impact of different adhesives on work of adhesion between CAD/CAM polymers and resin composite cements

scientific article published on 05 March 2014

Impact of different pretreatments and aging procedures on the flexural strength and phase structure of zirconia ceramics

scientific article published on 07 August 2019

Impact of high-speed sintering on translucency, phase content, grain sizes, and flexural strength of 3Y-TZP and 4Y-TZP zirconia materials

scientific article published on 12 April 2019

Impact of high-speed sintering, layer thickness and artificial aging on the fracture load and two-body wear of zirconia crowns

scientific article published on 12 May 2020

Impact of hydrothermal aging on the light transmittance and flexural strength of colored yttria-stabilized zirconia materials of different formulations

scientific article published on 18 March 2020

Impact of plasma treatment of PMMA-based CAD/CAM blanks on surface properties as well as on adhesion to self-adhesive resin composite cements

scientific article published on 21 July 2013

Impact of polymerization and storage on the degree of conversion and mechanical properties of veneering resin composites

scientific article published on 18 December 2020

Impact of storage media and temperature on color stability of tooth-colored CAD/CAM materials for final restorations

scientific article published on 01 October 2019

Impact of surface treatment of different reinforced glass-ceramic anterior crowns on load bearing capacity.

scientific article published on January 2015

Impact of the heating/quenching process on the mechanical, optical and thermodynamic properties of polyetheretherketone (PEEK) films

scientific article

Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks

scientific article

Impact of thermocycling on mechanical properties and discoloration of veneering composite resins after storage in various staining media

scientific article published on 02 July 2020

In vitro fatigue and fracture resistance of one- and two-piece CAD/CAM zirconia implant abutments

scientific article published in May 2015

In vitro study of the influence of dentin desensitizing and sealing on the shear bond strength of two universal resin cements

scientific article published in October 2010

In vitro study of the influence of the type of connection on the fracture load of zirconia abutments with internal and external implant-abutment connections

scientific article published on 01 September 2009

Influence of Different Cleaning Procedures on Tensile Bond Strength Between Zirconia Abutment and Titanium Base

scientific article published on 01 November 2019

Influence of Different Postpolymerization Strategies and Artificial Aging on Hardness of 3D-Printed Resin Materials: An In Vitro Study

scientific article published on 01 November 2020

Influence of PEEK surface modification on surface properties and bond strength to veneering resin composites

scientific article published on 01 August 2014

Influence of Specimen Preparation and Test Methods on the Flexural Strength Results of Monolithic Zirconia Materials

scientific article published on 09 March 2016

Influence of abutment model materials on the fracture loads of three-unit fixed dental prostheses.

scientific article

Influence of caries infiltrant contamination on shear bond strength of different adhesives to dentin

scientific article published on 25 April 2012

Influence of cementation and cement type on the fracture load testing methodology of anterior crowns made of different materials

scientific article published on 15 November 2013

Influence of dentin and enamel pretreatment with acidic sulfur compounds on adhesive performance

scientific article published on 09 November 2012

Influence of different surface treatments on two-body wear and fracture load of monolithic CAD/CAM ceramics

scientific article published on 13 December 2019

Influence of plasma pretreatment on shear bond strength of self-adhesive resin cements to polyetheretherketone

scientific article published on 17 March 2013

Influence of residual bone thickness on primary stability of hybrid self-tapping and cylindric non-self-tapping implants in vitro

scientific article published on 01 January 2013

Influence of silanes on the shear bond strength of resin cements to zirconia

scientific article published in January 2013

Investigations in the correlation between Martens hardness and flexural strength of composite resin restorative materials

scientific article published on 01 March 2010

In vitro study on the influence of postpolymerization and aging on the Martens parameters of 3D-printed occlusal devices

scientific article published on 19 May 2020

Is the high-performance thermoplastic polyetheretherketone indicated as a clasp material for removable dental prostheses?

scientific article published on 07 October 2020

Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques

scientific article published on 05 August 2011

Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens

scientific article

Load-bearing capacity of soldered and subsequently veneered 4-unit zirconia FDPs

scientific article published on 10 April 2013

Long-term tensile bond strength of differently cemented nanocomposite CAD/CAM crowns on dentin abutment.

scientific article

Macro- and microtopographical examination and quantification of CAD-CAM composite resin 2- and 3-body wear.

scientific article

Marginal adaptation, fracture load and macroscopic failure mode of adhesively luted PMMA-based CAD/CAM inlays

scientific article published on 23 December 2015

Measuring the polymerization stress of self-adhesive resin composite cements by crack propagation

scientific article published on 15 June 2020

Mechanical and optical properties of indirect veneering resin composites after different aging regimes

scientific article published on 19 November 2020

Mold filling and dimensional accuracy of titanium castings in a spinel-based investment

scientific article published on 07 August 2009

Nine prophylactic polishing pastes: impact on discoloration, gloss, and surface properties of a CAD/CAM resin composite

scientific article published on 16 April 2018

PEEK Primary Crowns with Cobalt-Chromium, Zirconia and Galvanic Secondary Crowns with Different Tapers-A Comparison of Retention Forces

scientific article published on 10 March 2016

PEEK surface treatment effects on tensile bond strength to veneering resins

scientific article published on 24 June 2014

Physicomechanical characterization of polyetheretherketone and current esthetic dental CAD/CAM polymers after aging in different storage media

scientific article published on 5 November 2015

Polyetheretherketone-a suitable material for fixed dental prostheses?

scientific article published on 6 April 2013

Quantification of the amount of blue light passing through monolithic zirconia with respect to thickness and polymerization conditions.

scientific article

Quantification of the amount of light passing through zirconia: the effect of material shade, thickness, and curing conditions

scientific article published on 19 March 2014

Reliability of wear measurements of CAD-CAM restorative materials after artificial aging in a mastication simulator

scientific article published on 25 June 2018

Repair of silorane composite--using the same substrate or a methacrylate-based composite?

scientific article

Repairability of CAD/CAM high-density PMMA- and composite-based polymers

scientific article published on 05 February 2015

Retention Load Values of Telescopic Crowns Made of Y-TZP and CoCr with Y-TZP Secondary Crowns: Impact of Different Taper Angles

scientific article published on 11 May 2016

Retention Load of Telescopic Crowns with Different Taper Angles between Cobalt-Chromium and Polyetheretherketone Made with Three Different Manufacturing Processes Examined by Pull-Off Test

scientific article published on April 2016

Retention Strength of PMMA/UDMA-Based Crowns Bonded to Dentin: Impact of Different Coupling Agents for Pretreatment

scientific article published on 6 November 2015

Retention force of differently fabricated telescopic PEEK crowns with different tapers

scientific article published in January 2016

Retention force of polyetheretherketone and cobalt-chrome-molybdenum removable dental prosthesis clasps after artificial aging

scientific article published on 16 October 2020

Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina

scientific article published on 01 May 2010

Shear bond strength of brackets to demineralize enamel after different pretreatment methods

scientific article published on 27 July 2011

Shear bond strength of orthodontic resins after caries infiltrant preconditioning

scientific article published on 22 August 2012

Spectrophotometric Evaluation of Polyetheretherketone (PEEK) as a Core Material and a Comparison with Gold Standard Core Materials

scientific article published on 20 June 2016

Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper

scientific article

Suitability of the new Aryl-Ketone-Polymer indicated for removable partial dentures: Analysis of elastic properties and bond strength to denture resin

scientific article published on 21 February 2020

Surface properties of polyetheretherketone after different laboratory and chairside polishing protocols

scientific article

Tensile bond strength of PMMA- and composite-based CAD/CAM materials to luting cements after different conditioning methods

Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD/CAM resin nanoceramic

scientific article published on 15 June 2014

Tensile bond strength of veneering resins to PEEK: impact of different adhesives

scientific article

The Effect of Different Storage Media on Color Stability of Self-Adhesive Composite Resin Cements for up to One Year

scientific article

The Effect of Hemostatic Agents on the Retention Strength of Zirconia Crowns Luted to Dentin Abutments

scientific article published on 25 March 2019

The effect of artificial aging on Martens hardness and indentation modulus of different dental CAD/CAM restorative materials

scholarly article by Rüdiger Hampe et al published October 2018 in Journal of the Mechanical Behavior of Biomedical Materials

The effect of ceramic primer on shear bond strength of resin composite cement to zirconia: a function of water storage and thermal cycling

scientific article

The effect of dentin desensitizer on shear bond strength of conventional and self-adhesive resin luting cements after aging

scientific article published on 15 August 2011

The effect of different pretreatment methods of PMMA-based crowns on the long-term tensile bond strength to dentin abutments.

scientific article

The effect of surface modification on the retention strength of polyetheretherketone crowns adhesively bonded to dentin abutments

scientific article published in July 2014

The effect of thermal cycling on metal-ceramic bond strength

scientific article published on 23 April 2009

The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio

scientific article

The effects of desensitizing resin, resin sealing, and provisional cement on the bond strength of dentin luted with self-adhesive and conventional resincements

scientific article published on 01 April 2012

The effects of internal tooth bleaching regimens on composite-to-composite bond strength

scientific article published in December 2012

The fracture load and failure types of veneered anterior zirconia crowns: an analysis of normal and Weibull distribution of complete and censored data

scientific article

The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins

scientific article published in December 2011

The influence of grain size on low-temperature degradation of dental zirconia

scientific article published on 25 November 2011

Three-unit reinforced polyetheretherketone composite FDPs: influence of fabrication method on load-bearing capacity and failure types.

scientific article published on 10 October 2014

Titanium Implant Characteristics After Implantoplasty: An In Vitro Study on Two Different Kinds of Instrumentation

scientific article published on 01 November 2019

Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness

scientific article published on 04 March 2015

Translucency, flexural strength, fracture toughness, fracture load of 3-unit FDPs, Martens hardness parameter and grain size of 3Y-TZP materials

scientific article published on 01 May 2020

Two Independent Prospectively Planned Blinded Weibull Statistical Analyses of Flexural Strength Data of Zirconia Materials

scientific article published on 24 June 2016

Two regression methods for estimation of a two-parameter Weibull distribution for reliability of dental materials

scientific article published on 11 December 2014

Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists

scientific article published on 27 February 2012

Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists

scientific article published on 01 May 2013

Two-body wear rate of PEEK, CAD/CAM resin composite and PMMA: Effect of specimen geometries, antagonist materials and test set-up configuration

scientific article published on 28 March 2016

Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness

scientific article published on 23 January 2013

Work of adhesion between resin composite cements and PEEK as a function of etching duration with sulfuric acid and its correlation with bond strength values

Zirconia and its novel compositions: What do clinicians need to know?

scientific article published on 01 January 2019

Zirconia ceramics, their contrast ratio and grain size depending on sintering parameters

scientific article published on 5 July 2014