List of works by Jürgen Groll

25th anniversary article: Engineering hydrogels for biofabrication

scientific article published on 23 August 2013

A Bone Glue with Sustained Adhesion under Wet Conditions

scientific article published on 19 December 2016

A Step Towards Clinical Translation of Biofabrication

scientific article published on 30 March 2016

A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink

scientific article

A composite hydrogel-3D printed thermoplast osteochondral anchor as an example for a zonal approach to cartilage repair: <i>in vivo</i> performance in a long-term equine model

scientific article published on 20 May 2020

A hydrogel-based versatile screening platform for specific biomolecular recognition in a well plate format

scientific article published on 26 February 2012

A new strategy to measure intercellular adhesion forces in mature cell-cell contacts

scientific article

A novel human artery model to assess the magnetic accumulation of SPIONs under flow conditions

scientific article published on 08 February 2017

A novel star PEG-derived surface coating for specific cell adhesion

scientific article published on September 2005

Additive Manufacturing of a Photo-Cross-Linkable Polymer via Direct Melt Electrospinning Writing for Producing High Strength Structures

scientific article published on 30 November 2015

Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing

scientific article published on 12 June 2015

Advances in Hybrid Fabrication toward Hierarchical Tissue Constructs

scientific article published on 07 April 2020

Age macular degeneration: etiology, prevention, individualized therapies, cell therapy, and tissue engineering

scientific article published on 23 March 2014

An in vitro and in vivo study of peptide-functionalized nanoparticles for brain targeting: The importance of selective blood-brain barrier uptake

scientific article published on 21 November 2016

Application of Linear and Branched Poly(Ethylene Glycol)-Poly(Lactide) Block Copolymers for the Preparation of Films and Solution Electrospun Meshes.

scientific article published on 27 November 2015

Bilateral PLA/alginate membranes for the prevention of postsurgical adhesions

scientific article published on 18 August 2015

Biocompatibility of PLGA/sP(EO-stat-PO)-coated mesh surfaces under constant shearing stress

scientific article published on 20 July 2011

Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks

Biofabrication of cell-loaded 3D spider silk constructs

scientific article published on 13 January 2015

Biofabrication: A Guide to Technology and Terminology.

scientific article published on 11 November 2017

Biofabrication: new approaches for tissue regeneration

scientific article published on 29 January 2018

Biofabrication: reappraising the definition of an evolving field.

scientific article

Biofunctionalized polymer surfaces exhibiting minimal interaction towards immobilized proteins.

scientific article

Biofunctionalized, ultrathin coatings of cross-linked star-shaped poly(ethylene oxide) allow reversible folding of immobilized proteins.

scientific article published in April 2004

Bioink Platform Utilizing Dual‐Stage Crosslinking of Hyaluronic Acid Tailored for Chondrogenic Differentiation of Mesenchymal Stromal Cells

scientific article published in 2021

Bleaching of plasmon-resonance absorption of gold nanorods decreases efficiency of cell destruction

scientific article

Blood cell and plasma protein repellent properties of star-PEG-modified surfaces

scientific article published on January 2006

Bone targeting for the treatment of osteoporosis

scientific article published on 08 October 2011

Cell communication modes and bidirectional mitochondrial exchange in direct and indirect macrophage/hMSC co-culture models

article

Chelate Bonding Mechanism in a Novel Magnesium Phosphate Bone Cement

Chemical characterization of hydroxyapatite obtained by wet chemistry in the presence of V, Co, and Cu ions

scientific article published on 27 December 2012

Comparison of coatings from reactive star shaped PEG-stat-PPG prepolymers and grafted linear PEG for biological and medical applications

scientific article

Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds

scientific article published on 22 March 2017

Controlled Ring-Opening Polymerization of Substituted Episulfides for Side-Chain Functional Polysulfide-Based Amphiphiles

scientific article published on 25 July 2012

Controlled intramyocardial release of engineered chemokines by biodegradable hydrogels as a treatment approach of myocardial infarction

scientific article published on 6 February 2014

Covalently layer-by-layer assembled homogeneous nanolayers with switchable wettability

Current treatment limitations in age-related macular degeneration and future approaches based on cell therapy and tissue engineering

scientific article published on 14 January 2014

Cysteine-Functional Polymers via Thiol-ene Conjugation

scientific article published on 21 January 2015

DNA Nanogels To Snare Carcinogens: A Bioinspired Generic Approach with High Efficiency

scientific article published in September 2016

DNA-Nanogele als Falle für Karzinogene: ein bioinspiriertes, generisches Konzept mit hoher Effizienz

Degradable polyester scaffolds with controlled surface chemistry combining minimal protein adsorption with specific bioactivation

article by Dirk Grafahrend et al published 12 December 2010 in Nature Materials

Design of Nanohydrogels for Targeted Intracellular Drug Transport to the Trans‐Golgi Network

scientific article published on 24 February 2023

Development of Endothelial Cell Networks in 3D Tissues by Combination of Melt Electrospinning Writing with Cell-Accumulation Technology

scientific article published on 13 November 2017

Differences of crystal structure and dynamics between a soft porous nanocrystal and a bulk crystal

scientific article published on 09 June 2011

Differential Production of Cartilage ECM in 3D Agarose Constructs by Equine Articular Cartilage Progenitor Cells and Mesenchymal Stromal Cells

scientific article published on 25 September 2020

Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects

scientific article published on 15 January 2014

Dispersity control of linear poly(glycidyl ether)s by slow monomer addition

scholarly article in RSC Advances, vol. 5 no. 82, 2015

Double printing of hyaluronic acid/poly(glycidol) hybrid hydrogels with poly(ε-caprolactone) for MSC chondrogenesis

scientific article published on 14 September 2017

Dual setting α-tricalcium phosphate cements

scientific article published on 13 December 2012

Dual-setting brushite-silica gel cements

scientific article published on 28 September 2014

Easy-to-Prepare Coating of Standard Cell Culture Dishes for Cell-Sheet Engineering Using Aqueous Solutions of Poly(2-n-propyl-oxazoline)

scientific article published on 25 February 2019

Effects of nanoparticle surface-coupled peptides, functional endgroups, and charge on intracellular distribution and functionality of human primary reticuloendothelial cells

scientific article published on 7 March 2012

Electrochemically assisted deposition of strontium modified magnesium phosphate on titanium surfaces.

scientific article

Electrospun, biofunctionalized fibers as tailored in vitro substrates for keratinocyte cell culture

scientific article published on September 2010

Embedding of active proteins and living cells in redox-sensitive hydrogels and nanogels through enzymatic cross-linking

scientific article published on 5 February 2013

Emulsion synthesis of dicalcium phosphate particles for the preparation of calcium phosphate cements with improved compressive strengths and reduced setting times

Evaluation of Hydrogels Based on Oxidized Hyaluronic Acid for Bioprinting

scientific article published on 09 October 2018

Expansion and differentiation of germline-derived pluripotent stem cells on biomaterials

scientific article published on 26 February 2013

Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules

scientific article

Fabrication of computationally designed scaffolds by low temperature 3D printing.

scientific article published on 26 July 2013

Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing

scientific article

Fiber reinforced calcium phosphate cements -- on the way to degradable load bearing bone substitutes?

scientific article published on 25 May 2012

Fiber reinforcement during 3D printing

Fibre pulsing during melt electrospinning writing

Functionalization of electrospun fibers of poly(epsilon-caprolactone) with star shaped NCO-poly(ethylene glycol)-stat-poly(propylene glycol) for neuronal cell guidance

scientific article published on 22 June 2010

Guidance of mesenchymal stem cells on fibronectin structured hydrogel films

scientific article

High definition fibrous poly(2-ethyl-2-oxazoline) scaffolds through melt electrospinning writing

article

How smart do biomaterials need to be? A translational science and clinical point of view

scientific article published on 20 July 2012

Hyaluronic Acid-Based Bioink Composition Enabling 3D Bioprinting and Improving Quality of Deposited Cartilaginous Extracellular Matrix

scientific article published on 01 August 2020

Hydrogel-fibre composites with independent control over cell adhesion to gel and fibres as an integral approach towards a biomimetic artificial ECM.

scientific article published on 3 April 2014

Immobilized DNA aptamers used as potent attractors for porcine endothelial precursor cells

scientific article published on March 2008

In situ formation of multilayer biocomposite with anisotropic crystal orientation

In situ guided tissue regeneration in musculoskeletal diseases and aging : Implementing pathology into tailored tissue engineering strategies

scientific article published on 20 October 2011

In vitro and in vivo evaluation of a hydrogel reservoir as a continuous drug delivery system for inner ear treatment

scientific article

In vitro ion adsorption and cytocompatibility of dicalcium phosphate ceramics

scientific article published on 08 June 2017

Inducing healing-like human primary macrophage phenotypes by 3D hydrogel coated nanofibres

scientific article

Influence of Different ECM Mimetic Peptide Sequences Embedded in a Nonfouling Environment on the Specific Adhesion of Human-Skin Keratinocytes and Fibroblasts on Deformable Substrates

scientific article published on 01 June 2007

Influence of MMP inhibitor GM6001 loading of fibre coated polypropylene meshes on wound healing: Implications for hernia repair.

scientific article published in January 2018

Intrinsic 3D Prestressing: A New Route for Increasing Strength and Improving Toughness of Hybrid Inorganic Biocements.

scientific article published on 17 July 2017

Isotropic Versus Bipolar Functionalized Biomimetic Artificial Basement Membranes and Their Evaluation in Long-Term Human Cell Co-Culture

scientific article published on 10 June 2016

Kontrolle der Freisetzungskinetik von Nanopartikeln aus 3D-gedruckten Hydrogelgerüsten

Live-cell super-resolution imaging of intrinsically fast moving flagellates

article by M Glogger et al published 23 January 2017 in Journal of Physics D

Low temperature fabrication of spherical brushite granules by cement paste emulsion

scientific article published on 19 August 2012

Magnesium ions and alginate do form hydrogels: a rheological study

article published in 2012

Makromolekulare Chemie 2010

Mechanical activation and cement formation of trimagnesium phosphate

Mechanical behavior of a soft hydrogel reinforced with three-dimensional printed microfibre scaffolds

scientific article published on 19 January 2018

Mechanical integrin stress and magnetic forces induce biological responses in mesenchymal stem cells which depend on environmental factors

scientific article published on December 2010

Mechanically Strong Microstructured Hydrogels Based on Reactive Star-Shaped Prepolymers

Mechanically strong hydrogels with reversible behaviour under cyclic compression with MPa loading

Melt Electrospinning Writing of Poly-Hydroxymethylglycolide-co-ε-Caprolactone-Based Scaffolds for Cardiac Tissue Engineering

scientific article published on 12 July 2017

Melt Electrowriting of Thermoplastic Elastomers

scientific article published on 14 April 2018

Melt electrospinning onto cylinders: effects of rotational velocity and collector diameter on morphology of tubular structures

Melt electrospinning writing of defined scaffolds using polylactide-poly(ethylene glycol) blends with 45S5 bioactive glass particles

article published in 2017

Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour mimicking that of ligaments and tendons

scientific article published on 17 March 2018

Micro- and Nanopatterned Star Poly(ethylene glycol) (PEG) Materials Prepared by UV-Based Imprint Lithography

scientific article published on 05 June 2007

Microcontact printing of proteins for neuronal cell guidance

scientific article published on 01 February 2007

Mild oxidation of thiofunctional polymers to cytocompatible and stimuli-sensitive hydrogels and nanogels

scientific article

Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enables Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects

Myoblast morphology and organization on biochemically micro-patterned hydrogel coatings under cyclic mechanical strain

scientific article published on 26 September 2009

NCO-sP(EO-stat-PO) coatings on gold sensors--a QCM study of hemocompatibility

scientific article

NCO-sP(EO-stat-PO) surface coatings preserve biochemical properties of RGD peptides

scientific article published on 10 November 2010

Nanogels Enable Efficient miRNA Delivery and Target Gene Downregulation in Transfection-Resistant Multiple Myeloma Cells

scientific article published on 08 January 2019

Nanogels with high active β-cyclodextrin content as physical coating system with sustained release properties.

scientific article published on 17 February 2014

Nanostructured ordering of fluorescent markers and single proteins on substrates

scientific article published in October 2005

Novel bone wax based on poly(ethylene glycol)-calcium phosphate cement mixtures

scientific article

Out-of-Plane 3D-Printed Microfibers Improve the Shear Properties of Hydrogel Composites.

scientific article

Oxygen diffusion hardening of tantalum coatings on cp-titanium for biomedical applications

scholarly article by T. Schmitz et al published February 2013 in Surface & Coatings Technology

P2RX7 genotype association in severe sepsis identified by a novel Multi-Individual Array for rapid screening and replication of risk SNPs

scientific article published on 25 May 2011

Patterned melt electrospun substrates for tissue engineering

scientific article published on 8 August 2008

Peptide-Functionalized Gold Nanorods Increase Liver Injury in Hepatitis

scientific article published on 01 October 2012

Permanent Hydrophilization and Generic Bioactivation of Melt Electrowritten Scaffolds

scientific article published on 20 March 2019

Phagocytosis Independent Extracellular Nanoparticle Clearance by Human Immune Cells

scientific article published on 01 January 2010

Phosphorylation of RS1 (RSC1A1) Steers Inhibition of Different Exocytotic Pathways for Glucose Transporter SGLT1 and Nucleoside Transporter CNT1, and an RS1-Derived Peptide Inhibits Glucose Absorption.

scientific article published on 13 October 2015

Physical and chemical characterization of Ag-doped Ti coatings produced by magnetron sputtering of modular targets.

scientific article published on 12 August 2014

Plasma-assisted hydrophilization of cochlear implant electrode array surfaces enables adhesion of neurotrophin-secreting cells

scientific article published on 20 November 2014

Platelet lysate outperforms FCS and human serum for co-culture of primary human macrophages and hMSCs

article

Polymeric electrospun scaffolds: neuregulin encapsulation and biocompatibility studies in a model of myocardial ischemia

scientific article published on 31 March 2015

Polysaccharide based covalently linked multi-membrane hydrogels

Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability

scientific article

Protein RS1 (RSC1A1) Downregulates the Exocytotic Pathway of Glucose Transporter SGLT1 at Low Intracellular Glucose via Inhibition of Ornithine Decarboxylase

scientific article published on 23 August 2016

Quantifying ligand-cell interactions and determination of the surface concentrations of ligands on hydrogel films: The measurement challenge

scientific article published on 8 June 2015

Rapid preparation of flexible porous coordination polymer nanocrystals with accelerated guest adsorption kinetics

scientific article published on 18 April 2010

Rapid uptake of gold nanorods by primary human blood phagocytes and immunomodulatory effects of surface chemistry

scientific article

Real-time measurement of protein adsorption on electrophoretically deposited hydroxyapatite coatings and magnetron sputtered metallic films using the surface acoustic wave technique

scientific article published on 30 December 2015

Side-chain cysteine-functionalized poly(2-oxazoline)s for multiple peptide conjugation by native chemical ligation.

scientific article

Simultaneous formation and mineralization of star-P(EO-stat-PO) hydrogels.

scientific article

Stable biochemically micro-patterned hydrogel layers control specific cell adhesion and allow long term cyclic tensile strain experiments.

scientific article published on 6 August 2014

Star polymer surface passivation for single-molecule detection

scientific article published in January 2010

Stepwise Control of Crosslinking in a One-Pot System for Bioprinting of Low-Density Bioinks

scientific article published on 22 April 2020

Stimuli-Sensitive Microgels from Native Elastin: An Easy Approach for a Drug Release System

article by Smriti Singh et al published 2013 in Advances in Polymer Science

Strategies and Molecular Design Criteria for 3D Printable Hydrogels

scientific article

Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds

scientific article published on 24 November 2015

Strong and tough magnesium wire reinforced phosphate cement composites for load-bearing bone replacement

scientific article published on 8 January 2013

Structural Optimization of Macroporous Magnesium Phosphate Scaffolds and their Cytocompatibility

Structure and properties of urea-crosslinked star poly[(ethylene oxide)-ran-(propylene oxide)] hydrogels

scientific article published in October 2008

Surface grafting of PEO-based star-shaped molecules for bioanalytical and biomedical applications

scientific article published in August 2007

Synthesis, patterning and applications of star-shaped poly(ethylene glycol) biofunctionalized surfaces.

scientific article published on 18 May 2007

TGF-β1-Modified Hyaluronic Acid/Poly(glycidol) Hydrogels for Chondrogenic Differentiation of Human Mesenchymal Stromal Cells

scientific article published on 21 May 2018

Tenside-free Preparation of Nanogels with High Functional β-Cyclodextrin Content

scientific article published on 08 August 2012

Tethered TGF-β1 in a Hyaluronic Acid-Based Bioink for Bioprinting Cartilaginous Tissues

scientific article published in 2022

The Next Step in Biomimetic Material Design: Poly-LacNAc-Mediated Reversible Exposure of Extra Cellular Matrix Components

scientific article published on 02 October 2012

The role of substrate morphology for the cytokine release profile of immature human primary macrophages

scientific article published on 31 August 2013

The use of a cartilage decellularized matrix scaffold for the repair of osteochondral defects: the importance of long-term studies in a large animal model.

scientific article published on 20 August 2016

Thioether-Polyglycidol as Multivalent and Multifunctional Coating System for Gold Nanoparticles

scientific article published on 10 January 2018

Thiol-Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies

scientific article published on 17 October 2017

Thiol-ene Clickable Poly(glycidol) Hydrogels for Biofabrication.

scientific article published on 13 May 2016

Thiol-ene Cross-Linkable Hydrogels as Bioinks for Biofabrication

article published in 2017

Tissue Mimicry in Morphology and Composition Promotes Hierarchical Matrix Remodeling of Invading Stem Cells in Osteochondral and Meniscus Scaffolds

scientific article published on 30 May 2018

Tough and Elastic α-Tricalcium Phosphate Cement Composites with Degradable PEG-Based Cross-Linker

scientific article published on 24 December 2018

Treatment of Focal Cartilage Defects in Minipigs with Zonal Chondrocyte/Mesenchymal Progenitor Cell Constructs ⬇️

scientific article published on 02 February 2019

Ultrathin Coatings with Change in Reactivity over Time Enable Functional In Vitro Networks Of Insect Neurons.

scientific article published on 5 June 2008

Ultrathin Functional Star PEG Coatings for DNA Microarrays

scientific article published on 01 July 2005

Ultrathin coatings from isocyanate terminated star PEG prepolymers: patterning of proteins on the layers

scientific article

Ultrathin coatings from isocyanate-terminated star PEG prepolymers: layer formation and characterization

scientific article

Ultrathin sP(EO-stat-PO) hydrogel coatings are biocompatible and preserve functionality of surface bound growth factors in vivo

scientific article published on 26 June 2013

Unidirectional control of anisotropic wetting through surface modification of PDMS microstructures

scientific article published on 23 September 2013

Via precise interface engineering towards bioinspired composites with improved 3D printing processability and mechanical properties

scientific article published on 12 June 2017

Paulina is supported by:

About Paulina

Help