Search filters

List of works by David C. Watts

3D-FE analysis of soft liner-acrylic interfaces under shear loading

scientific article published on 26 February 2011

3D-marginal adaptation versus setting shrinkage in light-cured microhybrid resin composites

scientific article published on 09 March 2006

A fiber-reinforced composite prosthesis restoring a lateral midfacial defect: a clinical report

scientific article

A laboratory evaluation of the physical and mechanical properties of selected root canal sealers.

scientific article published on 23 June 2010

A method for assessing force/work parameters for stickiness of unset resin-composites

scientific article published on 20 May 2011

A method for calculating the compliance of bonded-interfaces under shrinkage: validation for Class I cavities.

scientific article

A micro-computed tomography evaluation of mineral trioxide aggregate root canal fillings

scientific article published on 29 February 2012

A microcomputed tomography scanning study of root canal space: changes after the ultrasonic removal of fractured files

scientific article

A new kinetic model for the photopolymerization shrinkage-strain of dental composites and resin-monomers.

scientific article published on 15 March 2006

A review of dental injuries and the use of mouthguards in contact team sports

scientific article published on April 1994

ADM research guidance papers

scientific article published on 23 June 2017

Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties

scientific article published on 31 May 2017

Academy of Dental Materials guidance-Resin composites: Part II-Technique sensitivity (handling, polymerization, dimensional changes).

scientific article

Acids with an equivalent taste lead to different erosion of human dental enamel

scientific article published on 03 August 2011

Allergy to dental amalgam

scientific article published on 01 May 1982

Allergy to mercury in dental amalgam

scientific article published on 01 January 1982

Aluminium radiopacity standards for dentistry: an international survey.

scientific article

Analysis of reactions in glass-polyalkenoate/resin systems by dielectric impedance spectroscopy ⬇️

scientific article published on 01 March 1998

Antibacterial effect of different root canal sealers on three bacterial species

scientific article published on 22 March 2013

Axial shrinkage-stress depends upon both C-factor and composite mass.

scientific article

Biomimetic mineralization: long-term observations in patients with dentin sensitivity

scientific article published on 02 February 2012

Bonding of maxillofacial silicone elastomers to an acrylic substrate

scientific article published on 01 February 2010

CAD-FE modeling and analysis of class II restorations incorporating resin-composite, glass ionomer and glass ceramic materials.

scientific article published on 8 November 2017

Characteristics of visible-light-activated composite systems

scientific article published on 01 March 1984

Class I gap-formation in highly-viscous glass-ionomer restorations: delayed vs immediate polishing

scientific article

Colonization of Enterococcus faecalis in a new SiO/SiO2-microtube in vitro model system as a function of tubule diameter

scientific article published in June 2014

Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging.

scientific article

Controlled-release naringin nanoscaffold for osteoporotic bone healing.

scientific article published on 18 September 2014

Correlation of filler content and elastic properties of resin-composites

scientific article published on 21 December 2007

Creep deformation of restorative resin-composites intended for bulk-fill placement

scientific article published on 30 May 2012

Creep of experimental short fiber-reinforced composite resin ⬇️

scientific article published on 01 January 2012

Cytotoxic effects of dental bonding substances as a function of degree of conversion

scientific article published on 7 September 2008

Cytotoxicity of four categories of dental cements.

scientific article published on 11 October 2008

Cytotoxicity of metal ions to human oligodendroglial cells and human gingival fibroblasts assessed by mitochondrial dehydrogenase activity

scientific article published on 19 November 2007

Cytotoxicity of post and core composites as a function of environmental conditions

scientific article published on 30 August 2014

Cytotoxicity of resin composites as a function of interface area

scientific article published on 3 August 2007

Degradation resistance of ormocer- and dimethacrylate-based matrices with different filler contents

scientific article published on 02 November 2011

Determination of homologous distributions of bisEMA dimethacrylates in bulk-fill resin-composites by GC-MS

scientific article published on 28 February 2015

Development of novel electrospun dual-drug fiber mats loaded with a combination of ampicillin and metronidazole.

scientific article published on June 2016

Development of viscoelastic stability of resin-composites incorporating novel matrices

scientific article published on 01 December 2015

Diffusion and concurrent solubility of self-adhering and new resin-matrix composites during water sorption/desorption cycles.

scientific article published on 16 November 2010

Direct bonding: crystal growth as an alternative to acid-etching?

scientific article published on 01 May 1986

Discussing the future of dental materials, processes and products ⬇️

scientific article published on November 30, 2011

Edge strength of indirect restorative materials

scientific article published on 21 June 2009

Edge-strength of flowable resin-composites.

scientific article

Effect of continuous longitudinal glass fiber reinforcement on the cantilever beam strength of particulate filler composites

scientific article published in November 2006

Effect of curing light emission spectrum on the nanohardness and elastic modulus of two bulk-fill resin composites

scientific article published on 9 February 2016

Effect of extraoral aging conditions on color stability of maxillofacial silicone elastomer

scientific article published on 16 August 2010

Effect of extraoral aging conditions on mechanical properties of maxillofacial silicone elastomer.

scientific article published on 20 July 2011

Effect of filler particle size and morphology on force/work parameters for stickiness of unset resin-composites

scientific article published on 9 September 2009

Effect of filler particles morphology of resin-composites on cavity packing force for repeated condensation

scientific article published on 29 March 2017

Effect of filler size and morphology on viscoelastic stability of resin-composites under dynamic loading

scientific article published in March 2012

Effect of filler size and shape on local nanoindentation modulus of resin-composites.

scientific article published on 15 July 2008

Effect of nanofiller fractions and temperature on polymerization shrinkage on glass fiber reinforced filling material

scientific article published on 06 August 2007

Effect of net fiber reinforcement surface treatment on soft denture liner retention and longevity

scientific article

Effect of resin-composite filler particle size and shape on shrinkage-strain

scientific article published on 3 October 2009

Effect of resin-composite filler particle size and shape on shrinkage-stress

scientific article published on 18 February 2012

Effect of retained fractured instruments on tooth resistance to vertical fracture with or without attempt at removal

scientific article published on 19 August 2010

Effects of accelerated artificial daylight aging on bending strength and bonding of glass fibers in fiber-embedded maxillofacial silicone prostheses

scientific article published on 15 March 2010

Effects of bond primers on bending strength and bonding of glass fibers in fiber-embedded maxillofacial silicone prostheses

scientific article published on 01 February 2011

Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites

scientific article published on 15 August 2009

Effects of thread features in osseo-integrated titanium implants using a statistics-based finite element method.

scientific article published on 15 May 2012

Efficiency of a newly designed ultrasonic unit and tips in reducing temperature rise on root surface during the removal of fractured files

scientific article published on 01 June 2009

Endodontists experience using ultrasonics for removal of intra-canal fractured instruments

scientific article published on 01 April 2010

Evaluation of UDMA's potential as a substitute for Bis-GMA in orthodontic adhesives

scientific article published on 17 June 2013

Evidence-based dentistry and the need for clinically relevant models to predict material performance ⬇️

scientific article published on November 2, 2012

Exotherm behavior of the polymer-based provisional crown and fixed partial denture materials

scientific article published in May 2004

Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics

scientific article published on 07 April 2011

Factors affecting temperature rise on the external root surface during ultrasonic retrieval of intracanal separated files

scientific article published on 14 July 2008

Factors contributing to the separation of endodontic files

scientific article published in March 2008

Finite element analysis of bonded model Class I 'restorations' after shrinkage

scientific article published on 29 October 2011

Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles ⬇️

scientific article published on November 26, 2010

Hygroscopic expansion kinetics of dental resin-composites

scientific article

Hypersensitivity to epimine containing dental materials

scientific article published on December 1979

Immediate performance of self-etching versus system adhesives with multiple light-activated restoratives

scientific article published on 01 November 2004

Immediate versus water-storage performance of Class V flowable composite restoratives

scientific article published on 11 July 2006

In vitro characterization of two laboratory-processed resin composites

scientific article published on 01 July 2003

In vitro degradation of polyurethane orthodontic elastomeric modules

scientific article published in January 2005

In vitro pulp chamber temperature rise from irradiation and exotherm of flowable composites

scientific article published on 19 February 2008

In vitro study of edge-strength of provisional polymer-based crown and fixed partial denture materials

scientific article published on 13 August 2007

In-depth hardness profiles of stainless steel and Ni-Ti endodontic instrument cross-sections by nano-indentation

scientific article published on 14 July 2008

Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations

scientific article

Influence of explorer tip diameter in identifying restoration margin discrepancies

scientific article published on 5 March 2005

Initial versus final fracture of metal-free crowns, analyzed via acoustic emission

scientific article

International dental standards--order out of chaos?

scientific article published on 10 May 2011

Intraoral aging of the inner headgear component: a potential biocompatibility concern?

scientific article published in March 2001

Is a "flexible" glass fiber-bundle dowel system as retentive as a "rigid" quartz fiber dowel system?

scientific article published on 26 August 2008

Let there be light!

scientific article published on 30 April 2013

Light cured direct bonding--is it necessary to use a primer?

scientific article published on 01 February 1991

Marginal and flexural integrity of three classes of luting cement, with early finishing and water storage

scientific article

Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility

scientific article published on 21 January 2012

Marginal gap formation of light-activated restorative materials: effects of immediate setting shrinkage and bond strength

scientific article published in May 2002

Mathematical analysis of tooth and restoration contour using image analysis.

scientific article

Maxillofacial prosthetic rehabilitation in the UK: a survey of maxillofacial prosthetists' and technologists' attitudes and opinions

scientific article

Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling.

scientific article published on 13 April 2017

Mechanical behavior of endodontically restored canine teeth: Effects of ferrule, post material and shape

scientific article published on 7 November 2017

Mechanical behavior of post-restored upper canine teeth: a 3D FE analysis

scientific article published on 13 October 2011

Mechanical properties and bonding of maxillofacial silicone elastomers

scientific article published on 04 November 2009

Mercuric chloride: toxicity and apoptosis in a human oligodendroglial cell line MO3.13.

scientific article published on March 2003

Microleakage after thermocycling of cemented crowns--a meta-analysis.

scientific article published on 23 June 2011

Microtomographic evaluation of the bone-cell interactions with a silorane-based composite.

scientific article

Morphology and structure of polymer layers protecting dental enamel against erosion

scientific article published on 09 August 2012

Mouse calvarial defect model: an approach for the micro-tomographic evaluation of polymer scaffolds.

scientific article published on 19 September 2014

Multi-technique characterization of retrieved bone cement from revised total hip arthroplasties

scientific article published in 2003

Multiple correlations of material parameters of light-cured dental composites

scientific article

Nanoindentation creep versus bulk compressive creep of dental resin-composites

scientific article published on 20 September 2012

Nanomechanical properties of dental resin-composites

scientific article published on 29 September 2012

Network structures of Bis-GMA/TEGDMA resins differ in DC, shrinkage-strain, hardness and optical properties as a function of reducing agent.

scientific article published in May 2011

Numerical evaluation of bulk material properties of dental composites using two-phase finite element models

scientific article published on 22 June 2012

Numerical fatigue 3D-FE modeling of indirect composite-restored posterior teeth.

scientific article published on 11 January 2011

Opinions and attitudes of endodontists and general dental practitioners in the UK towards the intra-canal fracture of endodontic instruments. Part 2.

scientific article published in December 2008

Opinions and attitudes of endodontists and general dental practitioners in the UK towards the intracanal fracture of endodontic instruments: part 1.

scientific article published on 28 June 2008

Performance of two blue light-emitting-diode dental light curing units with distance and irradiation-time.

scientific article published on January 2004

Photo-polymerization shrinkage-stress kinetics in resin-composites: methods development.

scientific article published in January 2003

Physical properties of dual-cured luting-agents correlated to early no interfacial-gap incidence with composite inlay restorations

scientific article published on 23 March 2010

Poly(vinylphosphonic acid-co-acrylic acid) hydrogels: The effect of copolymer composition on osteoblast adhesion and proliferation

scientific article published on 11 September 2017

Polymerization kinetics and impact of post polymerization on the Degree of Conversion of bulk-fill resin-composite at clinically relevant depth

scientific article published on 18 August 2015

Polymerization shrinkage kinetics and shrinkage-stress in dental resin-composites

scientific article published on 28 May 2016

Polymerization shrinkage kinetics of dimethacrylate resin-cements

scientific article published on 28 May 2009

Polymerization shrinkage of experimental short glass fiber-reinforced composite with semi-inter penetrating polymer network matrix

scientific article

Polymerization shrinkage-strain kinetics of temporary crown and bridge materials

scientific article published in January 2004

Porosity and color of maxillofacial silicone elastomer

scientific article published on 5 November 2010

Post-cure depth of cure of bulk fill dental resin-composites.

scientific article published on 20 November 2013

Pre-heating effects on extrusion force, stickiness and packability of resin-based composite

scientific article published on 30 August 2019

Pre-heating time and exposure duration: Effects on post-irradiation properties of a thermo-viscous resin-composite

scientific article published on 05 May 2020

Reaction kinetics and mechanics in photo-polymerised networks.

scientific article

Reduced polymerization stress of MAPO-containing resin composites with increased curing speed, degree of conversion and mechanical properties

scientific article published on 12 March 2014

Release of metronidazole from electrospun poly(L-lactide-co-D/L-lactide) fibers for local periodontitis treatment

scientific article published on 04 January 2012

Reporting of light irradiation conditions in 300 laboratory studies of resin-composites

scientific article published on 31 December 2018

Resin composite monomers alter MTT and LDH activity of human gingival fibroblasts in vitro

scientific article

Resin-based composites show similar kinetic profiles for dimensional change and recovery with solvent storage.

scientific article published on 25 July 2015

Resin-composite cytotoxicity varies with shade and irradiance

scientific article published on 10 January 2012

Resistance to vertical fracture of MTA-filled roots.

scientific article

Rheological properties of resin composites according to variations in composition and temperature.

scientific article published on 12 March 2014

Robust spectrometer-based methods for characterizing radiant exitance of dental LED light curing units

scientific article published on 12 March 2015

Root-surface gap-formation with RMGIC restorations minimized by reduced P/L ratio of the first increment and delayed polishing

scientific article published on 12 October 2005

Sequential software processing of micro-XCT dental-images for 3D-FE analysis.

scientific article

Setting kinetics and shrinkage of self-adhesive resin cements depend on cure-mode and temperature

scientific article published on 03 April 2011

Shrinkage behaviour of flowable resin-composites related to conversion and filler-fraction

scientific article published on 26 June 2007

Shrinkage strain-rates of dental resin-monomer and composite systems

scientific article published on August 2005

Simultaneous determination of polymerization shrinkage, exotherm and thermal expansion coefficient for dental resin-composites

scientific article published on 25 September 2012

Spatial and cure-time distribution of dynamic-mechanical properties of a dimethacrylate nano-composite

scientific article published on 04 January 2009

Stickiness of dental resin composite materials to steel, dentin and bonded dentin

scientific article published on 01 January 2010

Stickiness prior to setting of some light cured resin-composites

scientific article published on 01 May 2003

Stress distributions in adhesively cemented ceramic and resin-composite Class II inlay restorations: a 3D-FEA study

scientific article published in November 2004

Structural conformation of in vitro and in vivo aged orthodontic elastomeric modules

scientific article published on December 1999

Study of energy transfer by different light curing units into a class III restoration as a function of tilt angle and distance, using a MARC Patient Simulator (PS).

scientific article published on 23 March 2016

Substrate-free multi-cellular aggregates of human gingival fibroblasts-fabrication, biomechanics and significance for tissue regeneration

scientific article published on 01 January 2013

Surface and bulk properties of dental resin- composites after solvent storage.

scientific article

Surface characterization of precious alloys treated with thione metal primers

scientific article published on 27 July 2006

Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM)

scientific article published on 01 February 1999

Surface integrity of solvent-challenged ormocer-matrix composite

scientific article published on 18 November 2010

Synthesis, characterization, shrinkage and curing kinetics of a new low-shrinkage urethane dimethacrylate monomer for dental applications

scientific article

Temperature rise on the external root surface during removal of endodontic fractured instruments

scientific article published on 08 August 2013

Temperature-dependence of creep behaviour of dental resin-composites

scientific article published on 01 December 2012

Temperature-dependent polymerization shrinkage stress kinetics of resin-composites.

scientific article published on 2 April 2014

Tensile properties of orthodontic elastomeric chains

scientific article published in April 2004

The effect of a leucite-containing ceramic filler on the abrasive wear of dental composites

scientific article published on 15 May 2007

The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin

scientific article published in March 2004

The effect of ultra-fast photopolymerisation of experimental composites on shrinkage stress, network formation and pulpal temperature rise

scientific article published on 24 September 2014

The introduction of 'E-only' papers in Dental Materials

scientific article published on 01 January 2009

The relationship between cyclic hygroscopic dimensional changes and water sorption/desorption of self-adhering and new resin-matrix composites.

scientific article

The unique calcium chelation property of poly(vinyl phosphonic acid-co-acrylic acid) and effects on osteogenesis in vitro.

scientific article published on 7 September 2017

The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA

scientific article published on 22 October 2020

Thermal diffusion through composite restorative materials

scientific article published on 01 February 1983

Time-dependence of coronal seal of temporary materials used in endodontics

scientific article published in December 2008

Time-dependent visco-elastic creep and recovery of flowable composites

scientific article published on 01 December 2007

Trends in restorative composites research: what is in the future?

scientific article published on 28 August 2017

Vertical fracture resistance of roots after ultrasonic removal of fractured instruments

scientific article

Viscoelastic stability of resin-composites aged in food-simulating solvents

scientific article published on 31 July 2013

Viscoelastic stability of resin-composites under static and dynamic loading

scientific article published on 27 December 2011

Paulina is supported by:

About Paulina

Help