Search filters

List of works by Jason Carey

A NURBS-based technique for subject-specific construction of knee bone geometry.

scientific article published on 17 July 2008

A comparative analysis of angular cephalometric values between CBCT generated lateral cephalograms versus digitized conventional lateral cephalograms.

scientific article published on December 2009

A comparison of torque expression between stainless steel, titanium molybdenum alloy, and copper nickel titanium wires in metallic self-ligating brackets

scientific article published on 01 September 2010

Accuracy of mesiodistal root angulation projected by cone-beam computed tomographic panoramic-like images

scientific article published on 01 April 2010

An investigation into the mechanical characteristics of select self-ligated brackets at a series of clinically relevant maximum torquing angles: loading and unloading curves and bracket deformation

scientific article published on 12 July 2011

Analysis of maxillary arch force/couple systems for a simulated high canine malocclusion: Part 1. Passive ligation

scientific article published on 20 July 2011

Analysis of maxillary arch force/couple systems for a simulated high canine malocclusion: Part 2. Elastic ligation

scientific article published on 14 June 2011

Analytically determined mechanical properties of, and models for the periodontal ligament: critical review of literature.

scientific article published on 19 October 2011

Applications of sensory feedback in motorized upper extremity prosthesis: a review

scientific article

Buckling test as a new approach to testing flexural rigidities of angiographic catheters

scientific article published on January 2006

Characteristics of lower extremity work during the impact phase of jumping and weightlifting

scientific article

Characterizing asymmetry across the whole sit to stand movement in healthy participants

scientific article published on 14 August 2013

Characterizing the effects of amplitude, frequency and limb position on vibration induced movement illusions: Implications in sensory-motor rehabilitation.

scientific article

Chemical composition of enamel surface as a predictor of in-vitro shear bond strength

scientific article published on 01 November 2009

Comparison of deformation and torque expression of the orthos and orthos Ti bracket systems ⬇️

scientific article published on October 19, 2011

Comparison of in vivo 3D cone-beam computed tomography tooth volume measurement protocols.

scientific article published on 23 December 2014

Comparison of third-order torque simulation with and without a periodontal ligament simulant

scientific article

Cone beam computed tomography registration for 3-D airway analysis based on anatomic landmarks

scientific article published on 14 June 2014

Deformation and warping of the bracket slot in select self-ligating orthodontic brackets due to an applied third order torque.

scientific article

Density conversion factor determined using a cone-beam computed tomography unit NewTom QR-DVT 9000.

scientific article published in November 2006

Development of a standardized testing system for orthodontic sliding mechanics.

scientific article published on 4 June 2015

Effect of object location on the density measurement and Hounsfield conversion in a NewTom 3G cone beam computed tomography unit

scientific article

Effect of squat depth and barbell load on relative muscular effort in squatting

scientific article published in October 2012

Effect of wire size on maxillary arch force/couple systems for a simulated high canine malocclusion

scientific article published on 22 May 2014

Evaluation of diagnosis techniques used for spinal injury related back pain

scientific article

Evaluation of fiber reinforced cement using digital image correlation

scientific article published on 3 June 2015

Experimentally determined mechanical properties of, and models for, the periodontal ligament: critical review of current literature

scientific article published on 05 April 2011

Feasibility of a braided composite for orthopedic bone cast

scientific article published on 15 January 2013

Illusory movement perception improves motor control for prosthetic hands.

scientific article published in March 2018

Influence of second-order bracket-archwire misalignments on loads generated during third-order archwire rotation in orthodontic treatment

scientific article published on 8 September 2015

Intraexaminer and interexaminer reliabilities of landmark identification on digitized lateral cephalograms and formatted 3-dimensional cone-beam computerized tomography images.

scientific article published on May 2010

Investigation into the effects of stainless steel ligature ties on the mechanical characteristics of conventional and self-ligated brackets subjected to torque

scientific article published on 4 March 2014

Leg dominance may not be a predictor of asymmetry in peak joint moments and ground reaction forces during sit-to-stand movements.

scientific article published in February 2014

Linear measurements using virtual study models.

scientific article

Locking plate fixation of proximal humeral fractures with impaction of the fracture site to restore medial column support: a biomechanical study

scientific article

Maxillary expansion treatment using bone anchors: development and validation of a 3D finite element model

scientific article published in April 2007

Measurement accuracy and reliability of tooth length on conventional and CBCT reconstructed panoramic radiographs.

scientific article published on September 2014

Measurement of Orthodontic Bracket Tie Wing Elastic and Plastic Deformation by Arch Wire Torque Expression Utilizing an Optical Image Correlation Technique ⬇️

scientific article published on December 13, 2009

Measurement of plastic and elastic deformation due to third-order torque in self-ligated orthodontic brackets.

scientific article

Mechanical effects of third-order movement in self-ligated brackets by the measurement of torque expression.

scientific article

Model-based cardiovascular disease diagnosis: a preliminary in-silico study

scientific article published on 21 September 2016

Modeling stress-relaxation behavior of the periodontal ligament during the initial phase of orthodontic treatment.

scientific article published in September 2013

Multiobjective optimization framework for landmark measurement error correction in three-dimensional cephalometric tomography

scientific article published on 2 May 2013

Myoelectric training systems.

scientific article published on September 2011

Numerical model for intraosseous infusion of the human calvarium for hydrocephalus shunting

scientific article

Online human training of a myoelectric prosthesis controller via actor-critic reinforcement learning.

scientific article published in June 2011

Optimization analysis for plane orientation in 3-dimensional cephalometric analysis of serial cone-beam computerized tomography images

scientific article published in June 2011

Orthodontic Bracket Manufacturing Tolerances and Dimensional Differences between Select Self-Ligating Brackets.

scientific article published on 27 June 2010

Precision and accuracy of suggested maxillary and mandibular landmarks with cone-beam computed tomography for regional superimpositions: An in vitro study

scientific article published on January 2016

Proximal humeral fracture fixation: locking plate construct ± intramedullary fibular allograft

scientific article published on 22 July 2011

Quadriceps effort during squat exercise depends on hip extensor muscle strategy

scientific article published on March 2015

Reliability of traditional cephalometric landmarks as seen in three-dimensional analysis in maxillary expansion treatments

scientific article published on 01 November 2009

Representation of bone heterogeneity in subject-specific finite element models for knee

scientific article published on 21 December 2009

Review of maxillary expansion appliance activation methods: engineering and clinical perspectives

scientific article published on 28 June 2010

Sensitivity analysis for plane orientation in three-dimensional cephalometric analysis based on superimposition of serial cone beam computed tomography images

scientific article

Simulation of muscle and adipose tissue deformation in the passive human pharynx

scientific article published on 27 July 2015

Structural health monitoring to detect the presence, location and magnitude of structural damage in cadaveric porcine spines.

scientific article published on 09 December 2008

Surface analysis of etched molar enamel by gas adsorption

scientific article published in June 2008

The development of a myoelectric training tool for above-elbow amputees.

scientific article published on 20 February 2012

The effect of biomechanical variables on force sensitive resistor error: Implications for calibration and improved accuracy

scientific article published on 9 February 2016

The feasibility of vibration as a tool to assess spinal integrity

scientific article published on 5 June 2008

The validity, reliability, and time requirement of study model analysis using cone-beam computed tomography-generated virtual study models

scientific article published on 17 April 2013

Three-dimensional accuracy of measurements made with software on cone-beam computed tomography images

scientific article published in July 2008

Three-dimensional cephalometric superimposition of the nasomaxillary complex.

scientific article published in December 2014

Three-dimensional deformation of orthodontic brackets.

scientific article

Three-dimensional orthodontic force measurements.

scientific article published on October 2009

Torque expression of self-ligating brackets.

scientific article

Towards a viscoelastic model for the unfused midpalatal suture: development and validation using the midsagittal suture in New Zealand white rabbits.

scientific article published on 17 May 2013

Viscoelastic response of the midpalatal suture during maxillary expansion treatment

scientific article published on 28 September 2015

Paulina is supported by:

About Paulina

Help