Search filters

List of works by Fernão D. Magalhães

13C NMR study of presence of uron structures in amino adhesives and relation with wood-based panels performance

Adhesive bond strength development evaluation using ABES in different lignocellulosic materials

Antimicrobial graphene nanoplatelets coatings for silicone catheters

scholarly article in Carbon, vol. 139, November 2018

Biocompatibility of poly(lactic acid) with incorporated graphene-based materials.

scientific article published on 21 December 2012

Biocompatible reinforcement of poly(Lactic acid) with graphene nanoplatelets

Biosourced Binder for Wood Particleboards Based on Spent Sulfite Liquor and Wheat Flour

scientific article published on 27 September 2018

Biosourced Disposable Trays Made of Brewer's Spent Grain and Potato Starch.

scientific article published on 26 May 2019

Blocked melamine-urea-formaldehyde resins and their usage in agglomerated cork panels

Carbon Membranes with Extremely High Separation Factors and Stability

Carbon dioxide absorption kinetics in potassium threonate

scientific article published in July 2008

Chemical composition of melamine-urea-formaldehyde (MUF) resins assessed by near-infrared (NIR) spectroscopy

Coke combustion in fluidized bed: A multi-disciplinary lab experiment

Copolymerization of UF Resins with Dimethylurea for Improving Storage Stability without Impairing Adhesive Performance.

scientific article published on 19 June 2018

Determination of melamine content in amino resins by near-infrared spectroscopy

Determination of resin and moisture content in melamine-formaldehyde paper using near infrared spectroscopy

article by Ana Henriques et al published October 2017 in Journal of Near Infrared Spectroscopy

Dispersion of graphene nanoplatelets in poly(vinyl acetate) latex and effect on adhesive bond strength

Effect of Panel Moisture Content on Internal Bond Strength and Thickness Swelling of Medium Density Fiberboard

scientific article published on 30 December 2020

Effect of added amines on the morphology of multivesiculated polyester particles

scholarly article in Polymer Engineering and Science, vol. 53 no. 11, November 2012

Effect of binder on performance of intumescent coatings

Effect of biodegradation on thermo-mechanical properties and biocompatibility of poly(lactic acid)/graphene nanoplatelets composites

scholarly article by Susana Moreira et al published December 2016 in European Polymer Journal

Effect of curing conditions on the properties of multivesiculated polyester particle dispersions

scholarly article in Polymer Engineering and Science, vol. 54 no. 2, April 2013

Effect of filler type on properties of PBAT/organoclay nanocomposites

Effect of peroxide oxidation on the expansion of potato starch foam

article by Joana V. Barbosa et al published October 2019 in Industrial Crops and Products

Effect of spent sulfite liquor on urea-formaldehyde resin performance

Erratum: Borges, I., et al. Exposure of Smaller and Oxidized Graphene on Polyurethane Surface Improves its Antimicrobial Performance. Nanomaterials 2020, 10, 349

scientific article published on 27 July 2020

Exposure of Smaller and Oxidized Graphene on Polyurethane Surface Improves its Antimicrobial Performance

scientific article published on 18 February 2020

Fabrication and antimicrobial performance of surfaces integrating graphene-based materials

scientific article

From mechanical stimulus to bone formation: A review

scientific article published on 24 June 2015

Graphene oxide-reinforced poly(2-hydroxyethyl methacrylate) hydrogels with extreme stiffness and high-strength

Graphene-based materials biocompatibility: a review.

scientific article published on 23 May 2013

Highly flexible glycol-urea-formaldehyde resins

Impact of the Synthesis Procedure on Urea-Formaldehyde Resins Prepared by Alkaline–Acid Process

Improvement of storage stability of UF resins by adding caprolactam

Improving hydrophobic and oleophobic performances of high-pressure laminates

Incorporation of an acrylic fatty acid derivative as comonomer for oxidative cure in acrylic latex

Incorporation of graphene oxide into poly(ɛ-caprolactone) 3D printed fibrous scaffolds improves their antimicrobial properties

scientific article published on 16 December 2019

Influence of Pyrolysis Parameters on the Performance of CMSM

Influence of oxidized graphene nanoplatelets and [DMIM][NTf2] ionic liquid on the tribological performance of an epoxy-PTFE coating

scholarly article by Pedro Bandeira et al published May 2016 in Tribology International

Intramedullary nailing biomechanics: Evolution and challenges

scientific article published on 01 March 2019

Introducing flexibility in urea-formaldehyde resins: Copolymerization with polyetheramines

Low Density Wood Particleboards Bonded with Starch Foam-Study of Production Process Conditions

scientific article published on 19 June 2019

Low Density Wood-Based Particleboards Bonded with Foamable Sour Cassava Starch: Preliminary Studies

scientific article published on 08 October 2016

Low-Density Cardoon (Cynara cardunculus L.) Particleboards Bound with Potato Starch-Based Adhesive

scientific article published on 11 August 2020

Low-cost natural binder for particleboards production: study of manufacture conditions and stability

Mechanical study of PLA-PCL fibers during in vitro degradation.

scientific article published on 21 December 2010

Natural Additive for Reducing Formaldehyde Emissions in Urea-Formaldehyde Resins

Near-Infrared Radiation-Based Mild Photohyperthermia Therapy of Non-Melanoma Skin Cancer with PEGylated Reduced Nanographene Oxide

scientific article published on 17 August 2020

Oxidized Xanthan Gum and Chitosan as Natural Adhesives for Cork.

scientific article published on 14 July 2016

Partial replacement of melamine by benzoguanamine in MUF resins towards improved flexibility of agglomerated cork panels

Physicomechanical characterization of monodisperse multivesiculated polyester particles

Poly(lactic acid) Composites Containing Carbon-Based Nanomaterials: A Review

scientific article published on 06 July 2017

Polymer surface adsorption as a strategy to improve the biocompatibility of graphene nanoplatelets.

scientific article published on 14 July 2016

Postformable and Self-Healing Finish Foil Based on Polyurethane-Impregnated Paper

article by Ana Antunes et al published 22 November 2016 in Industrial & Engineering Chemistry Research

Preparation of carbon molecular sieve membranes from an optimized ionic liquid-regenerated cellulose precursor

Preparation of robust polyamide microcapsules by interfacial polycondensation of p-phenylenediamine and sebacoyl chloride and plasticization with oleic acid.

scientific article published on 8 June 2015

Production of monodisperse multivesiculated polyester particles with a T-junction microfluidic device

article

Production of water tolerant melamine–urea–formaldehyde resin by incorporation of sodium metabisulphite

Recent developments on intramedullary nailing: a biomechanical perspective.

scientific article published in November 2017

Reinforcement of Thermoplastic Corn Starch with Crosslinked Starch/Chitosan Microparticles

scientific article published on 04 September 2018

Release of Volatile Compounds from Polymeric Microcapsules Mediated by Photocatalytic Nanoparticles

scholarly article by Juliana Marques et al published 2013 in International Journal of Photoenergy

Smaller particle size and higher oxidation improves biocompatibility of graphene-based materials

scientific article published in April 2016

Stabilization of nano-TiO2 aqueous dispersions with poly(ethylene glycol)-b-poly(4-vinyl pyridine) block copolymer and their incorporation in photocatalytic acrylic varnishes

scholarly article by Sandra Monteiro et al published November 2014 in Progress in Organic Coatings

Synthesis of multihollow polyester particles in supra- and infra-millimeter size ranges by double emulsion process

scholarly article in Polymer Engineering and Science, vol. 56 no. 5, February 2016

The effect of traditional flame retardants, nanoclays and carbon nanotubes in the fire performance of epoxy resin composites

The influence of scavengers on VOC emissions in particleboards made from pine and poplar

Tribological Performance of PTFE-based Coating Modified with Microencapsulated [HMIM][NTf2] Ionic Liquid

Use of Multi-Hollow Polyester Particles as Opacifying Agent for Injection-Molded Polyethylene

scientific article published on 11 June 2020

Use of master curves based on time-temperature superposition to predict creep failure of aluminium-glass adhesive joints

Utilization and characterization of amino resins for the production of wood-based panels with emphasis on particleboards (PB) and medium density fibreboards (MDF). A review

Water adsorption on carbon molecular sieve membranes: Experimental data and isotherm model

article

“Comparison of finite difference and control volume methods for solving differential equations” by G.G. Botte, J.A. Ritter, R.E. White, 24 (2000) 2633–2654

Paulina is supported by:

About Paulina

Help