Search filters

List of works by Jack L. Ferracane

A comparative evaluation of polymerization stress data obtained with four different mechanical testing systems.

scientific article

A comparative study between crack analysis and a mechanical test for assessing the polymerization stress of restorative composites.

scientific article published on 4 April 2012

A comparative study of the bond strengths of amalgam and alloy-glass ionomer cores

scientific article published on 01 May 1989

A comparison of four modes of evaluating depth of cure of light-activated composites

scientific article published on 01 March 1987

A pilot study of a simple photon migration model for predicting depth of cure in dental composite

scientific article published on 8 August 2005

Abrasive wear of resin composites as related to finishing and polishing procedures.

scientific article

Acoustic emission analysis of the effect of simulated pulpal pressure and cavity type on the tooth-composite interfacial de-bonding.

scientific article

Acoustic emission analysis of tooth-composite interfacial debonding

scientific article published on 25 October 2012

Alternative photoinitiator system reduces the rate of stress development without compromising the final properties of the dental composite

scientific article

Alternatives in polymerization contraction stress management.

scientific article published on 4 June 2004

Association between caries location and restorative material treatment provided

scientific article

Authors' response

Bioactive glass fillers reduce bacterial penetration into marginal gaps for composite restorations.

scientific article

Biofilm formation affects surface properties of novel bioactive glass-containing composites

scientific article

Biomimetic dentin desensitizer based on nano-structured bioactive glass

scientific article published on 30 December 2010

BisGMA/TEGDMA ratio and filler content effects on shrinkage stress

scientific article published on 2 March 2011

Buonocore Lecture. Placing dental composites--a stressful experience.

scientific article published on May 2008

Calculation of contraction stresses in dental composites by analysis of crack propagation in the matrix surrounding a cavity.

scientific article published on 18 December 2008

Carbon-Based Solid-State Calcium Ion-Selective Microelectrode and Scanning Electrochemical Microscopy: A Quantitative Study of pH-Dependent Release of Calcium Ions from Bioactive Glass

scientific article published on 10 February 2016

Comparative study of luting agents with composite resin cores

scientific article

Comparison of CaOH with MTA for direct pulp capping: a PBRN randomized clinical trial

scientific article published on 20 May 2013

Comparison of at-home and in-office tooth whitening using a novel shade guide

scientific article published on July 2010

Comparison of efficacy of an in-office whitening system used with and without a whitening priming agent

scientific article published on 25 February 2011

Comparison of push-out bond strengths of Resilon with three different sealers

scientific article published on 14 December 2009

Comparison of two at-home whitening products of similar peroxide concentration and different delivery methods

scientific article published on 21 March 2012

Comparison of two-step versus four-step composite finishing/polishing disc systems: evaluation of a new two-step composite polishing disc system

scientific article published on 01 March 2011

Comparison of various resin composite shades and layering technique with a shade guide

scientific article published on 01 April 2010

Composite polymerization stress as a function of specimen configuration assessed by crack analysis and finite element analysis

scientific article published on 9 August 2013

Contraction stress and physical properties development of a resin-based composite irradiated using modulated curing methods at two C-factor levels

scientific article published in March 2008

Contraction stress determinants in dimethacrylate composites

scientific article

Contraction stress of low-shrinkage composite materials assessed with different testing systems

scientific article

Contraction stresses in dental composites adjacent to and at the bonded interface as measured by crack analysis

scientific article published on 04 August 2010

Controlled clinical trials and practice-based research in dentistry

scientific article published on 01 September 2008

Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins

scientific article published on 01 February 1985

Crown retention: a comparative study of core type and luting agent

scientific article published on 01 April 1987

Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide

scientific article published in April 2012

Cyclic mechanical loading promotes bacterial penetration along composite restoration marginal gaps

scientific article published on 18 April 2015

Cytotoxicity of amalgams

scientific article published on 01 September 1988

Cytotoxicity of amalgams, alloys, and their elements and phases

scientific article published on 01 January 1991

Cytotoxicity of resin composites containing bioactive glass fillers

scientific article published on 3 January 2015

Degree of conversion and contraction stress development of a resin composite irradiated using halogen and LED at two C-factor levels

scientific article published on 01 January 2009

Dentin matrix component solubilization by solutions of pH relevant to self-etching dental adhesives.

scientific article published in October 2013

Dentin matrix components extracted with phosphoric acid enhance cell proliferation and mineralization

scientific article published on 8 January 2016

Dentine as a bioactive extracellular matrix

scientific article published on February 2012

Depth of cure of visible light-cured resin: clinical simulation

scientific article published on 01 May 1986

Detection of dentinal cracks using contrast-enhanced micro-computed tomography

scientific article

Determination of the optimal photoinitiator concentration in dental composites based on essential material properties

scientific article published on 27 March 2009

Developing a more complete understanding of stresses produced in dental composites during polymerization

scientific article published on 01 January 2005

Dissolution of mercury from amalgam into saline solution

scientific article published on 01 January 1987

Does adhesive thickness affect resin-dentin bond strength after thermal/load cycling?

scientific article published in January 2009

Dynamic and static strength of an implant-supported overdenture model reinforced with metal and nonmetal strengtheners

scientific article published on 01 November 2011

Dynamic mechanical analysis of storage modulus development in light-activated polymer matrix composites

scientific article published in May 2002

Effect of Different In Vitro Aging Methods on Color Stability of a Dental Resin-Based Composite Using CIELAB and CIEDE2000 Color-Difference Formulas.

scientific article

Effect of Nanofiller Loading on Cure Efficiency and Potential Color Change of Model Composites

scientific article

Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione

scientific article

Effect of different photoinitiators and reducing agents on cure efficiency and color stability of resin-based composites using different LED wavelengths

scientific article published on 3 September 2015

Effect of energy density on properties and marginal integrity of posterior resin composite restorations

scientific article published on 01 January 2004

Effect of free mercury on the strengths of dental amalgams

scientific article published on 01 October 1985

Effect of layering methods, composite type, and flowable liner on the polymerization shrinkage stress of light cured composites

scientific article published on 09 May 2012

Effect of shrinkage strain, modulus, and instrument compliance on polymerization shrinkage stress of light-cured composites during the initial curing stage

scientific article published on 03 August 2010

Effectiveness of oxide films in reducing mercury release from amalgams

scientific article published on May 1992

Effects of fat admixture on the strengths of conventional and low-viscosity bone cements

scientific article published on 01 January 1984

Effects of resin formulation and nanofiller surface treatment on the properties of experimental hybrid resin composite

scientific article published on 01 August 2004

Effects of thermocycling on amalgam and alloy-glass ionomer cores luted to cast gold crowns

scientific article published on 01 June 1988

Enhanced evaporation of mercury from amalgams in non-oxidizing environments

scientific article published on 01 September 1993

Ensuring the global availability of high-quality dental restorative materials

scientific article

Evaluation of different methods of optical impression making on the marginal gap of onlays created with CEREC 3D.

scientific article

Evaluation of glass-cermet cores under cast crowns

scientific article published in April 1990

Evaluation of subsurface defects created during the finishing of composites

scientific article published on September 1992

Factors affecting photopolymerization stress in dental composites

scientific article

Factors involved in mechanical fatigue degradation of dental resin composites

scientific article published on 21 May 2013

Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review.

scientific article

Filler features and their effects on wear and degree of conversion of particulate dental resin composites.

scientific article

Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests

scientific article published on 06 August 2007

Fluoride-containing adhesive: durability on dentin bonding

scientific article published on 30 July 2009

Fourier transform infrared analysis of degree of polymerization in unfilled resins--methods comparison

scientific article published on 01 August 1984

Fracture toughness of experimental dental composites aged in ethanol

scientific article published on July 1995

How should composite be layered to reduce shrinkage stress: incremental or bulk filling?

scientific article

In vitro wear of resin-based materials--simultaneous corrosive and abrasive wear.

scientific article

In vitro wear simulation measurements of composite versus resin-modified glass ionomer luting cements for all-ceramic restorations.

scientific article

Influence of biofilm formation on the optical properties of novel bioactive glass-containing composites

scientific article published on 6 July 2016

Influence of instrument compliance and specimen thickness on the polymerization shrinkage stress measurement of light-cured composites

scientific article published on 16 November 2006

Influence of photoinitiator type on the rate of polymerization, degree of conversion, hardness and yellowing of dental resin composites

scientific article published on 5 March 2008

Influence of surface treatments on the bond strength of repaired resin composite restorative materials

scientific article published on 22 November 2008

Influence of the Compliance and Layering Method on the Wall Deflection of Simulated Cavities in Bulk-fill Composite Restoration

scientific article published on 01 November 2016

Influence of the antagonist material on the wear of different composites using two different wear simulation methods.

scientific article

Initial dynamic viscoelasticity change of composites during light curing

scientific article published on 18 February 2010

Initial mercury evaporation from experimental Ag-Sn-Cu amalgams containing Pd.

scientific article published in July 2004

Introduction to and outcomes of the conference on adhesion in dentistry

scientific article published on 08 January 2010

Ion release from, and fluoride recharge of a composite with a fluoride-containing bioactive glass

scientific article published on 28 August 2014

Is the wear of dental composites still a clinical concern? Is there still a need for in vitro wear simulating devices?

scientific article published on 24 March 2006

Kinetics of polymerization and contraction stress development in self-adhesive resin cements

scientific article published on 6 July 2012

Light-Curing Units: A Review of What We Need to Know

scientific article published on 08 July 2015

Marginal leakage in class V composite resin restorations with glass ionomer liners in vitro

scientific article published in May 1990

Measurement and comparison of bracket transfer accuracy of five indirect bonding techniques

scientific article published on 20 February 2014

Measuring the residual stress in dental composites using a ring slitting method.

scientific article

Mechanical performance of novel bioactive glass containing dental restorative composites.

scientific article published on 17 September 2013

Mechanistic aspects of fatigue crack growth behavior in resin based dental restorative composites.

scientific article published on 23 February 2009

Mentoring and Role Modeling: The Gifts That Keep On Giving

scientific article

Mercury release from dental amalgams into continuously replenished liquids

scientific article published on 01 January 2003

Mercury vaporization from amalgams with varied alloy compositions

scientific article published on July 1995

Microstructural characterization and fracture behavior of a microhybrid and a nanofill composite.

scientific article published on 18 April 2008

Modulated photoactivation methods: Influence on contraction stress, degree of conversion and push-out bond strength of composite restoratives.

scientific article published on 20 November 2006

Novel biomaterials and technologies for the dental, oral, and craniofacial structures

scientific article published on December 2014

Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins

scientific article published on 09 November 2010

Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays

scientific article

Polymerization stress, shrinkage and elastic modulus of current low-shrinkage restorative composites

scientific article published on 15 September 2010

Polymerization stress--is it clinically meaningful?

scientific article published on 25 July 2015

Polymerization stresses in low-shrinkage dental resin composites measured by crack analysis

scientific article

Porcelain surface alterations and refinishing after use of two orthodontic bonding methods

scientific article

Post-cure heat treatments for composites: properties and fractography

scientific article published in September 1992

Probing the hierarchy of evidence to identify the best strategy for placing class II dental composite restorations using current materials

scientific article published on 18 November 2020

Properties of a glass-ionomer/resin-composite hybrid material

scientific article published on 01 September 1989

Properties of heat-treated composites after aging in water

scientific article published on 01 November 1995

Properties of posterior composite: results of round robin testing for a specification

scientific article published on 01 March 1994

Pulse-delay Curing: Influence of Initial Irradiance and Delay Time on Shrinkage Stress and Microhardness of Restorative Composites

scientific article published in September 2006

Quantitation of total mercury vapor released during dental procedures

scientific article published on 01 May 1992

Quantum yield of conversion of the photoinitiator camphorquinone

scientific article published on 21 July 2006

R-curve behavior and micromechanisms of fracture in resin based dental restorative composites

scientific article published on 24 December 2008

R-curve behavior and toughening mechanisms of resin-based dental composites: effects of hydration and post-cure heat treatment

scientific article

Rate of elution of leachable components from composite

scientific article published on 01 October 1990

Real-time measurement of dentinal fluid flow during amalgam and composite restoration

scientific article published on 07 January 2010

Reduced mercury vapor release from dental amalgams prepared with binary Hg-in liquid alloys

scientific article published on 01 November 1994

Reduced polymerization stress through non-bonded nanofiller particles

scientific article published in September 2002

Reduction of polymerization contraction stress for dental composites by two-step light-activation.

scientific article published in September 2002

Relationship between shade and depth of cure for light-activated dental composite resins

scientific article published on 01 April 1986

Resin composite--state of the art.

scientific article

Resin-based composite performance: are there some things we can't predict?

scientific article

Rheology of acrylic bone cements

scientific article published on 01 January 1981

Rheology of composite restoratives

scientific article published on 01 September 1981

Self-adhesive resin cements - chemistry, properties and clinical considerations.

scientific article published on 06 December 2010

Shear bond strength of four commercial bonding systems to cp Ti

scientific article published on 01 March 1995

Slumping resistance and viscoelasticity prior to setting of dental composites

scientific article

Slumping tendency and rheological properties of flowable composites

scientific article published on 18 February 2010

Solvent degradation and reduced fracture toughness in aged composites

scientific article published in January 1992

Sorption, solubility, shrinkage and mechanical properties of "low-shrinkage" commercial resin composites.

scientific article

Spatio-temporal analysis of shrinkage vectors during photo-polymerization of composite

scientific article published on 14 October 2013

Spotlight on bond strength testing--unraveling the complexities

scientific article published on 23 September 2011

Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems

scientific article published on 30 September 2014

Surface characterization of amalgams using X-ray photoelectron spectroscopy

scientific article published on 01 September 1987

The effect of combining photoinitiator systems on the color and curing profile of resin-based composites.

scientific article published on 25 July 2016

The effect of different polishing systems on surface roughness and gloss of various resin composites

scientific article published on 01 January 2007

The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins

scientific article published on 01 January 1986

The effect of various dentifrices on surface roughness and gloss of resin composites

scientific article published on 01 March 2010

The effects of surface roughness of composite resin on biofilm formation of Streptococcus mutans in the presence of saliva.

scientific article

The in vitro cytotoxicity of eluates from dentin bonding resins and their effect on tyrosine phosphorylation of L929 cells

scientific article published on July 2001

The light-curing unit: An essential piece of dental equipment

scientific article published on 21 July 2020

Thermal analysis of amalgams

scientific article published on 01 October 1988

Thio-urethanes improve properties of dual-cured composite cements.

scientific article

Three cements used for orthodontic banding of porcelain molars

scientific article published in January 2007

Time-dependent deformation of composite resins--compositional considerations

scientific article published on 01 November 1985

Time-dependent dissolution of amalgams into saline solution

scientific article published on 01 August 1987

Ultraviolet light-induced yellowing of dental restorative resins

scientific article published on 01 October 1985

Variables affecting the fracture toughness of dental composites

scientific article published in June 1987

Water aging reverses residual stresses in hydrophilic dental composites.

scientific article published on 22 November 2013

Paulina is supported by:

About Paulina

Help