A Comparative Analysis of Scopus and Web of Science (WoS) Literature on the Autism Crisis

scientific article published on 07 July 2021

A correlation of the convective heat transfer coefficient between an air flow and a phase change material plate

A method to identify barriers to and enablers of implementing climate change mitigation options

scholarly article

A simple model to predict the thermal performance of a ventilated facade with phase change materials

Acoustic insulation capacity of Vertical Greenery Systems for buildings

article published in 2016

Active phase change material package for thermal protection of ice cream containers

Adaptation of rammed earth to modern construction systems: Comparative study of thermal behavior under summer conditions

article

Advances in energy storage research and development: The 12th International Conference on Energy Storage Innostock 2012

article

Advances in the valorization of waste and by-product materials as thermal energy storage (TES) materials

Affordable construction towards sustainable buildings: review on embodied energy in building materials

article

An Innovative Solar-Biomass Energy System to Increase the Share of Renewables in Office Buildings

scientific article published in 2021

An approach to the simulation of PCMs in building applications using TRNSYS

Analysis of implementing phase change materials in open-air swimming pools

Assessment of the hydration/dehydration behaviour of MgSO4∙7H2O filled cellular foams for sorption storage applications through morphological and thermo-gravimetric analyses

Benchmarking of useful phase change materials for a building application

Building integration of PCM for natural cooling of buildings

article

CO 2 mitigation accounting for Thermal Energy Storage (TES) case studies

Carbonaceous residues from biomass gasification as catalysts for biodiesel production

article

Comparative Analysis of Web of Science and Scopus on the Energy Efficiency and Climate Impact of Buildings

scientific article published on 15 January 2020

Comparative life cycle assessment of thermal energy storage systems for solar power plants

article

Comparative study of different numerical models of packed bed thermal energy storage systems

Comparison of phase change slurries: Physicochemical and thermal properties

Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials

article

Compatibility of materials for macroencapsulation of inorganic phase change materials: Experimental corrosion study

Composite gypsum containing fatty-ester PCM to be used as constructive system: Thermophysical characterization of two shape-stabilized formulations

Computational efficiency in numerical modeling of high temperature latent heat storage: Comparison of selected software tools based on experimental data

Control of a PCM ventilated facade using reinforcement learning techniques

scientific article published in November 2015

Control strategies comparison of a ventilated facade with PCM – energy savings, cost reduction and CO 2 mitigation

Corrosion Assessment of Myo-Inositol Sugar Alcohol as a Phase Change Material in Storage Systems Connected to Fresnel Solar Plants

article

Corrosion Test of Salt Hydrates and Vessel Metals for Thermochemical Energy Storage

Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage

Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications

Corrosion of metal and polymer containers for use in PCM cold storage

Corrosion of metal containers for use in PCM energy storage

Corrosion of metals and salt hydrates used for thermochemical energy storage

article published in 2015

Corrosion testing device for in-situ corrosion characterization in operational molten salts storage tanks: A516 Gr70 carbon steel performance under molten salts exposure

Critical challenges and capacity building needs for renewable energy deployment in Pacific Small Island Developing States (Pacific SIDS)

scientific article published on 13 January 2017

Design and performance of energy-efficient solar residential house in Andorra

article by Jordi Llovera et al published April 2011 in Applied Energy

Design of a Prefabricated Concrete Slab with PCM Inside the Hollows

Determination of enthalpy temperature curves of phase change materials with the temperature-history method: improvement to temperature dependent properties

Developing a PCM-enhanced mortar for thermally active precast walls

Development and characterization of new shape-stabilized phase change material (PCM)—Polymer including electrical arc furnace dust (EAFD), for acoustic and thermal comfort in buildings

Eco-costs evaluation for the optimal design of buildings with lower environmental impact

Economic Viability of a Molten Carbonate Fuel Cell Working With Biogas

Economic Viability of a Molten Carbonate Fuel Cell Working With Biogas

Economic evaluation of a hybrid heating system in different climate zones based on model predictive control

scientific article published in 2020

Economic impact of integrating PCM as passive system in buildings using Fanger comfort model

Economics and climate change emissions analysis of a bioclimatic institutional building with trigeneration and solar support

scholarly article by Marc Medrano et al published December 2008 in Applied Thermal Engineering

Education and training gaps in the renewable energy sector

Effect of PCM on the Hydration Process of Cement-Based Mixtures: A Novel Thermo-Mechanical Investigation.

scientific article published on 23 May 2018

Effect of d-mannitol polymorphism in its thermal energy storage capacity when it is used as PCM

Effect of microencapsulated phase change material in sandwich panels

Effect of the impurity magnesium nitrate in the thermal decomposition of the solar salt

scholarly article by Cristina Prieto et al published August 2018 in Solar Energy

Embodied energy and cost of high temperature thermal energy storage systems for use with concentrated solar power plants

article

Embodied energy in thermal energy storage (TES) systems for high temperature applications

Energy Efficiency Indicators for Assessing Construction Systems Storing Renewable Energy: Application to Phase Change Material-Bearing Façades

Energy management and CO2 mitigation using phase change materials (PCM) for thermal energy storage (TES) in cold storage and transport

Energy performance of a ventilated double skin facade with PCM under different climates

Energy savings due to the use of PCM for relocatable lightweight buildings passive heating and cooling in different weather conditions

Enhanced thermal energy supply via central solar heating plants with seasonal storage: A multi-objective optimization approach

article

Environmental performance of recycled rubber as drainage layer in extensive green roofs. A comparative Life Cycle Assessment

Estimating the industrial waste heat recovery potential based on CO2 emissions in the European non-metallic mineral industry

article

Evaluation of the environmental impact of experimental buildings with different constructive systems using Material Flow Analysis and Life Cycle Assessment

Evaluation of the environmental impact of experimental cubicles using Life Cycle Assessment: A highlight on the manufacturing phase

Experimental Evaluation of a Paraffin as Phase Change Material for Thermal Energy Storage in Laboratory Equipment and in a Shell-and-Tube Heat Exchanger

Experimental analysis of a car incorporating phase change material

scholarly article published August 2016

Experimental analysis of charging and discharging processes, with parallel and counter flow arrangements, in a molten salts high temperature pilot plant scale setup

article

Experimental analysis of hydroquinone used as phase change material (PCM) to be applied in solar cooling refrigeration

Experimental analysis of the effective thermal conductivity enhancement of PCM using finned tubes in high temperature bulk tanks

Experimental analysis of the effectiveness of a high temperature thermal storage tank for solar cooling applications

Experimental and numerical analysis of a chilly bin incorporating phase change material

Experimental characterization of a solid industrial by-product as material for high temperature sensible thermal energy storage (TES)

Experimental evaluation at pilot plant scale of multiple PCMs (cascaded) vs. single PCM configuration for thermal energy storage

article

Experimental evaluation of a concrete core slab with phase change materials for cooling purposes

Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems

Experimental study of a ventilated facade with PCM during winter period

article

Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes

Experimental study on the selection of phase change materials for low temperature applications

Experimental validation of the exact analytical solution to the steady periodic heat transfer problem in a PCM layer

Experimentation with a water tank including a PCM module

Fatty acid eutectic mixtures and derivatives from non-edible animal fat as phase change materials

scholarly article in RSC Advances, vol. 7 no. 39, 2017

Free-cooling of buildings with phase change materials

Green facade for energy savings in buildings: The influence of leaf area index and facade orientation on the shadow effect

Green roofs as passive system for energy savings in buildings during the cooling period: use of rubber crumbs as drainage layer

Green roofs as passive system for energy savings when using rubber crumbs as drainage layer

Green vertical systems for buildings as passive systems for energy savings

Greenery System for Cooling Down Outdoor Spaces: Results of an Experimental Study

scientific article published in 2020

Health hazard, cycling and thermal stability as key parameters when selecting a suitable phase change material (PCM)

article

Heat transfer enhancement of fatty acids when used as PCMs in thermal energy storage

Heating and cooling energy trends and drivers in Europe

article published in 2017

Heating and cooling energy trends and drivers in buildings

Improvement of a thermal energy storage using plates with paraffin–graphite composite

Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale

Industrial waste heat recovery technologies: An economic analysis of heat transformation technologies

article

Industrial waste materials and by-products as thermal energy storage (TES) materials: A review

Influence of alkaline chlorides on thermal energy storage properties of bischofite

Influence of the heat transfer fluid in a CSP plant molten salts charging process

scientific article published in December 2017

Inquiry-Based Learning for Older People at a University in Spain

article

Integration of renewable technologies in historical and heritage buildings: A review

article

Intercomparative tests on phase change materials characterisation with differential scanning calorimeter

article

Investigating greenhouse challenge from growing trends of electricity consumption through home appliances in buildings

Key performance indicators in thermal energy storage: Survey and assessment

Lessons learned from corrosion of materials with molten salts during molten salt tank preheating

scientific article published in 2022

Life Cycle Assessment of alveolar brick construction system incorporating phase change materials (PCMs)

Life Cycle Assessment of experimental cubicles including PCM manufactured from natural resources (esters): A theoretical study

Life Cycle Assessment of the inclusion of phase change materials (PCM) in experimental buildings

Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review

article

Life cycle assessment of a ventilated facade with PCM in its air chamber

Life cycle costing as a bottom line for the life cycle sustainability assessment in the solar energy sector: A review

Lithium in thermal energy storage: A state-of-the-art review

Low carbon and low embodied energy materials in buildings: A review

article

MSWI bottom ash for thermal energy storage: An innovative and sustainable approach for its reutilization

Mapping and discussing Industrial Waste Heat (IWH) potentials for different countries

Material selection and testing for thermal energy storage in solar cooling

Materials and system requirements of high temperature thermal energy storage systems: A review. Part 2: Thermal conductivity enhancement techniques

article

Materials selection of steam-phase change material (PCM) heat exchanger for thermal energy storage systems in direct steam generation facilities

Measurement of enthalpy curves of phase change materials via DSC and T-History: When are both methods needed to estimate the behaviour of the bulk material in applications?

article

Mechanical response evaluation of microcapsules from different slurries

Methodologies to estimate industrial waste heat potential by transferring key figures: A case study for Spain

article

Methods to estimate the industrial waste heat potential of regions – A categorization and literature review

article

MgSO4·7H2O filled macro cellular foams: An innovative composite sorbent for thermo-chemical energy storage applications for solar buildings

article published in 2018

Minimization of the environmental impact of chrome tanning: a new process reusing the tanning floats

Model predictive control strategy applied to different types of building for space heating

article published in 2018

Modeling phase change materials behavior in building applications: Comments on material characterization and model validation

Modelization of a water tank including a PCM module

Molten salt facilities, lessons learnt at pilot plant scale to guarantee commercial plants; heat losses evaluation and correction

article

Multi-objective design of reverse osmosis plants integrated with solar Rankine cycles and thermal energy storage

article

Multi-objective optimisation of bio-based thermal insulation materials in building envelopes considering condensation risk

Multi-objective optimization coupled with life cycle assessment for retrofitting buildings

Multi-objective optimization of thermal modelled cubicles considering the total cost and life cycle environmental impact

Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation

Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins

New Database on Phase Change Materials for Thermal Energy Storage in Buildings to Help PCM Selection

New Green Facades as Passive Systems for Energy Savings on Buildings

New database to select phase change materials: Chemical nature, properties, and applications

New equipment for testing steady and transient thermal performance of multilayered building envelopes with PCM

New formulation and characterization of enhanced bulk-organic phase change materials

New methodology developed for the differential scanning calorimetry analysis of polymeric matrixes incorporating phase change materials

Numerical and Experimental Analysis of a Low-GWP Heat Pump Coupled to Electrical and Thermal Energy Storage to Increase the Share of Renewables across Europe

scientific article published in 2023

Numerical model evaluation of a PCM cold storage tank and uncertainty analysis of the parameters

Numerical modelling of ventilated facades: A review

article

Numerical simulation of the melting and solidification processes of two organic phase change materials in spherical enclosures for cold thermal energy storage applications

scientific article published in 2022

Numerical study on the thermal performance of a ventilated facade with PCM

article published in 2013

On an innovative approach for microclimate enhancement and retrofit of historic buildings and artworks preservation by means of innovative thin envelope materials

Optimization of deterministic controls for a cooling radiant wall coupled to a PV array

Optimization of three new compositions of stabilized rammed earth incorporating PCM: Thermal properties characterization and LCA

article

Optimized demand side management (DSM) of peak electricity demand by coupling low temperature thermal energy storage (TES) and solar PV

Overview of thermal energy storage (TES) potential energy savings and climate change mitigation in Spain and Europe

article

PCM incorporation in a concrete core slab as a thermal storage and supply system: Proof of concept

PCM thermal energy storage tanks in heat pump system for space cooling

Parameters to take into account when developing a new thermochemical energy storage system

Phase Change Material Selection for Thermal Energy Storage at High Temperature Range between 210 °C and 270 °C

Phase Change Material Selection for Thermal Processes Working under Partial Load Operating Conditions in the Temperature Range between 120 and 200 °C

Phase change materials and thermal energy storage for buildings

Phase-Change Materials Use in Nearly Zero Energy Building Refurbishment

Physico-chemical and mechanical properties of microencapsulated phase change material

article

Physicochemical and Thermal Study of a MPCM of PMMA Shell and Paraffin Wax as a Core

Plant cover and floristic composition effect on thermal behaviour of extensive green roofs

article

Potential Use of Cow Manure for Poly(Lactic Acid) Production

scientific article published in 2022

Preparation and Characterization of Inorganic PCM Microcapsules by Fluidized Bed Method

scientific article published on 4 January 2016

Process integration of thermal energy storage systems – Evaluation methodology and case studies

Recent patents on nano-enhanced materials for use in thermal energy storage (TES).

scientific article published on 27 October 2016

Reduction of the subcooling of bischofite with the use of nucleatings agents

Renewable energy research and technologies through responsible research and innovation looking glass: Reflexions, theoretical approaches and contemporary discourses

article

Requirements to consider when choosing a thermochemical material for solar energy storage

Review of Reactors with Potential Use in Thermochemical Energy Storage in Concentrated Solar Power Plants

article

Review of Solar Thermal Storage Techniques and Associated Heat Transfer Technologies

article

Review of technology: Thermochemical energy storage for concentrated solar power plants

article

Review of the T -history method to determine thermophysical properties of phase change materials (PCM)

article

Review on sorption materials and technologies for heat pumps and thermal energy storage

article

Review on the methodology used in thermal stability characterization of phase change materials

article

Review on thermal energy storage with phase change: materials, heat transfer analysis and applications

article

Service life of the dwelling stock in Spain

article

Simulation and control of thermally activated building systems (TABS)

Single layer mortars with microencapsulated PCM: Study of physical and thermal properties, and fire behaviour

Solar Absorption in a Ventilated Facade with PCM. Experimental Results

Stability of sugar alcohols as PCM for thermal energy storage

article by Aran Solé et al published July 2014 in Solar Energy Materials and Solar Cells

Stabilized rammed earth incorporating PCM: Optimization and improvement of thermal properties and Life Cycle Assessment

State of the art on gas–solid thermochemical energy storage systems and reactors for building applications

article published in 2015

State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization

article

State of the art on high-temperature thermal energy storage for power generation. Part 2—Case studies

Storage Stability of Bimodal Emulsions vs. Monomodal Emulsions

Stratification analysis in packed bed thermal energy storage systems

Study of Fresh and Hardening Process Properties of Gypsum with Three Different PCM Inclusion Methods.

scientific article published on 24 September 2015

Study of the Thermal Properties and the Fire Performance of Flame Retardant-Organic PCM in Bulk Form

scientific article

Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM)

article

Supercritical CO 2 as heat transfer fluid: A review

article

Synthesis and Thermophysical Characterization of Fatty Amides for Thermal Energy Storage

scientific article published on 21 October 2019

Temperature distribution and heat losses in molten salts tanks for CSP plants

article

The thermal behaviour of extensive green roofs under low plant coverage conditions

article

The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review

article

The use of phase change materials in fish farms: A general analysis

Thermal Energy Storage Implementation Using Phase Change Materials for Solar Cooling and Refrigeration Applications

Thermal Stability Test of Sugar Alcohols as Phase Change Materials for Medium Temperature Energy Storage Application

article by Aran Solé et al published 2014 in Energy Procedia

Thermal analysis of a low temperature storage unit using phase change materials without refrigeration system

Thermal analysis of a ventilated facade with PCM for cooling applications

Thermal assessment of extensive green roofs as passive tool for energy savings in buildings

Thermal behaviour of d-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale

article

Thermal behaviour of insulation and phase change materials in buildings with internal heat loads: experimental study

Thermal characterization of buildings from the monitoring of the AC system consumption

Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review

article

Thermal energy storage for renewable heating and cooling systems

Thermal energy storage in building integrated thermal systems: A review. Part 1. active storage systems

Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system

article

Thermal loads inside buildings with phase change materials: Experimental results

Thermal performance evaluation of bischofite at pilot plant scale

article

Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material

Thermal storage in a MW scale. Molten salt solar thermal pilot facility: Plant description and commissioning experiences

article

Thermo-acoustic performance of green roof substrates in dynamic hygrothermal conditions

Thermochemical energy storage and conversion: A-state-of-the-art review of the experimental research under practical conditions

article

Thermophysical Characterization of Sorption TCM

Thermophysical characterization and thermal cycling stability of two TCM: CaCl 2 and zeolite

Thermophysical characterization of a by-product from the non-metallic industry as inorganic PCM

Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review

article

Unconventional experimental technologies available for phase change materials (PCM) characterization. Part 1. Thermophysical properties

Unconventional experimental technologies used for phase change materials (PCM) characterization: part 2 – morphological and structural characterization, physico-chemical stability and mechanical properties

Uncovering relationships between environmental metrics in the multi-objective optimization of energy systems: A case study of a thermal solar Rankine reverse osmosis desalination plant

article

Use of PCM–polymer composite dense sheet including EAFD in constructive systems

Use of by-products as additives in adobe bricks: Mechanical properties characterisation

Use of microencapsulated PCM in buildings and the effect of adding awnings

Use of microencapsulated PCM in concrete walls for energy savings

Use of multi-layered PCM gypsums to improve fire response. Physical, thermal and mechanical characterization

article

Use of partial load operating conditions for latent thermal energy storage management

Use of polyethylene glycol for the improvement of the cycling stability of bischofite as thermal energy storage material

Use of rubber crumbs as drainage layer in green roofs as potential energy improvement material

Utilization of phase change materials in solar domestic hot water systems

Vertical Greenery Systems (VGS) for energy saving in buildings: A review

article

Vertical greenery systems for energy savings in buildings: A comparative study between green walls and green facades