List of works by Edith Mäder

A Comparative Study on the Textile Processing of Carbon and Multifunctional Glass Fiber Sensor Yarns for Structural Health Monitoring

scientific article from 2016

Acid-base interactions and covalent bonding at a fiber-matrix interface: contribution to the work of adhesion and measured adhesion strength

scientific article from 2000

Aging of alkali-resistant glass and basalt fibers in alkaline solutions: Evaluation of the failure stress by weibull distribution function

scientific article from 2009

Behavior of load transfer in functionalized carbon nanotube/epoxy nanocomposites

CNT-grafted glass fibers as a smart tool for epoxy cure monitoring, UV-sensing and thermal energy harvesting in model composites

scientific article from 2016

Carbon fiber surfaces and composite interphases

scientific article from 2014

Carbon nanotube-cellulose composite aerogels for vapour sensing

Cellulose fibres with carbon nanotube networks for water sensing

scientific article from 2014

Characterization and micromechanical testing of the interphase of aramid-reinforced epoxy composites

article published in 2001

Characterization of Interphase Properties by Frequency-Dependent Cyclic Loading of Single Fibre Model Composites

scientific article from 2010

Characterization of interphase properties: Microfatigue of single fibre model composites

scientific article from 2010

Characterization of structural, mechanical and nano-mechanical properties of electrospun PGS/PCL fibers

scholarly article in RSC Advances, vol. 4 no. 33, 2014

Coating of Carbon Nanotube Fibers: Variation of Tensile Properties, Failure Behavior, and Adhesion Strength

Comparative study on monitoring structural damage in fiber-reinforced polymers using glass fibers with carbon nanotubes and graphene coating

scientific article from 2016

Comparison of tensile, thermal, and thermo-mechanical properties of polyester filaments having different cross-sectional shape

scientific article from 2009

Controlled interfacial adhesion of Twaron® aramid fibres in composites by the finish formulation

Controlled synthesis of hierarchical TiO2 nanoparticles on glass fibres and their photocatalytic performance

scientific article published on 01 September 2014

Correlation between electrokinetic potential, dispersibility, surface chemistry and energy of carbon nanotubes

Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: a review.

scientific article

Electrically conductive aerogels composed of cellulose and carbon nanotubes

scientific article from 2013

Electrokinetic properties of natural fibres

scientific article from 2005

Experimental detection of a transcrystalline interphase in glass-fibre/polypropylene composites

scientific article from 2000

Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing

Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites

scientific article from 2010

Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors

scientific article from 2010

Glass fiber reinforced high glass transition temperature thiol–ene networks

Health monitoring in continuous glass fibre reinforced thermoplastics: Tailored sensitivity and cyclic loading of CNT-based interphase sensors

scientific article from 2010

High performance natural rubber composites with a hierarchical reinforcement structure of carbon nanotube modified natural fibers

Highly curable epoxy/MWCNTs nanocomposites: An effective approach to functionalization of carbon nanotubes

scientific article from 2015

How can adhesion be determined from micromechanical tests?

scientific article from 2001

Hybrid effects on tensile properties of hybrid short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites

scientific article form 2001

Investigation of Transcrystalline Interphases in Polypropylene/Glass Fiber Composites Using Micromechanical Tests

scientific article from 2018

Investigation of interfacial strength parameters in polymer matrix composites: Compatibility and reproducibility

scientific article from 2018

Jute fibre/epoxy composites: Surface properties and interfacial adhesion

scientific article from 2012

Jute fibre/polypropylene composites. II. Thermal, hydrothermal and dynamic mechanical behaviour

scientific article from 2007

Jute/polypropylene composites I. Effect of matrix modification

scientific article from 2006

Multifunctional films composed of carbon nanotubes and cellulose regenerated from alkaline-urea solution

scientific article from 2013

Nanocomposite coatings for healing surface defects of glass fibers and improving interfacial adhesion

scientific article from 2008

Novel Carbon Nanotube/Cellulose Composite Fibers As Multifunctional Materials.

scientific article

Single MWNT-glass fiber as strain sensor and switch

scientific article published on 17 June 2011

Smart Cellulose Fibers Coated with Carbon Nanotube Networks

scientific article from 2014

Surface, interphase and composite property relations in fibre-reinforced polymers

scientific article from 1994

Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites

Tensile strength of glass fibres with carbon nanotube–epoxy nanocomposite coating: Effects of CNT morphology and dispersion state

The interphase microstructure and electrical properties of glass fibers covalently and non-covalently bonded with multiwall carbon nanotubes

scientific article from 2014

The use of a carbon nanotube layer on a polyurethane multifilament substrate for monitoring strains as large as 400%

scientific article from 2012

Thermal energy harvesting for large-scale applications using MWCNT-grafted glass fibers and polycarbonate-MWCNT nanocomposites

scientific article from

Three techniques of interfacial bond strength estimation from direct observation of crack initiation and propagation in polymer–fibre systems

Unique water sensors based on carbon nanotube-cellulose composites

scientific article from 2013

Variable structural colouration of composite interphases

scientific article from 2017

Why Should the "Alternative" Method of Estimating Local Interfacial Shear Strength in a Pull-Out Test Be Preferred to Other Methods?

article

Paulina is supported by:

About Paulina

Help