Search filters

List of works by John Fisher

(iv) Enhancing the safety and reliability of joint replacement implants ⬇️

scientific article published on August 2012

(v) Simulation and measurement of wear in metal-on-metal bearings in vitro- understanding the reasons for increased wear

scientific article published on August 2012

2009 Knee Society Presidential Guest Lecture: Polyethylene wear in total knees

scientific article published on 11 August 2009

A biomechanical characterisation of acellular porcine super flexor tendons for use in anterior cruciate ligament replacement: investigation into the effects of fat reduction and bioburden reduction bioprocesses ⬇️

scientific article

A comparison between electromechanical and pneumatic-controlled knee simulators for the investigation of wear of total knee replacements ⬇️

scientific article

Bi-linear mechanical property determination of acellular human patellar tendon grafts for use in anterior cruciate ligament replacement ⬇️

scientific article

Biocompatibility and potential of acellular human amniotic membrane to support the attachment and proliferation of allogeneic cells

scientific article published in April 2008

Biocompatibility of acellular human pericardium

scientific article published on 14 June 2007

Biological Effects of Clinically Relevant CoCr Nanoparticles in the Dura Mater: An Organ Culture Study ⬇️

scientific article published on 16 June 2014

Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells ⬇️

scientific article published on 31 January 2013

Biotribology of articular cartilage--a review of the recent advances

scientific article

Biphasic investigation of contact mechanics in natural human hips during activities ⬇️

scientific article

Biphasic surface amorphous layer lubrication of articular cartilage

scientific article published on 19 July 2005

Cement particles containing radio-opacifiers stimulate pro-osteolytic cytokine production from a human monocytic cell line.

scientific article published in August 2003

Characterisation of wear particles produced by metal on metal and ceramic on metal hip prostheses under standard and microseparation simulation

scientific article published on 14 December 2006

Classification tree analysis of race-specific subgroups at risk for a central venous catheter-related bloodstream infection

scientific article

Comparative wear under different conditions of surface-engineered metal-on-metal bearings for total hip arthroplasty

scientific article published in December 2004

Comparison between FEBio and Abaqus for biphasic contact problems ⬇️

scientific article published on 26 June 2013

Comparison of ceramic‐on‐metal and metal‐on‐metal hip prostheses under adverse conditions ⬇️

scientific article published on January 29, 2013

Comparison of human and animal femoral head chondral properties and geometries ⬇️

scientific article published on January 1, 2012

Comparison of the biological activity of grade GUR 1120 and GUR 415HP UHMWPE wear debris

scientific article

Comparison of the response of human peripheral blood mononuclear cells to challenge with particles of three bone cements in vitro

scientific article published in February 2003

Computational investigation of the time-dependent contact behaviour of the human tibiofemoral joint under body weight ⬇️

scientific article

Computational wear prediction of artificial knee joints based on a new wear law and formulation

scientific article published on 16 February 2011

Consequences of exposure to peri-articular injections of micro- and nano-particulate cobalt-chromium alloy

scientific article published on 9 August 2013

Contact mechanics and elastohydrodynamic lubrication in a novel metal-on-metal hip implant with an aspherical bearing surface ⬇️

scientific article published on 8 December 2009

Contact mechanics and lubrication analyses of ceramic-on-metal total hip replacements ⬇️

article published in 2013

Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions ⬇️

scientific article published on September 2014

Corrigendum to "The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities." [Medical Engineering & Physics, Volume 38, Issue 6 (June 2016) Pages 518-525].

scientific article published in June 2016

Cross-shear implementation in sliding-distance-coupled finite element analysis of wear in metal-on-polyethylene total joint arthroplasty: intervertebral total disc replacement as an illustrative application

scientific article published on June 2010

Current strategies in meniscal regeneration ⬇️

scientific article published on 13 September 2013

Decellularization and Characterization of Porcine Superflexor Tendon: A Potential Anterior Cruciate Ligament Replacement ⬇️

scientific article

Decellularization of human donor aortic and pulmonary valved conduits using low concentration sodium dodecyl sulfate ⬇️

scientific article published on 12 December 2016

Development and characterisation of a decellularised bovine osteochondral biomaterial for cartilage repair ⬇️

scientific article published on 21 April 2015

Development and characterisation of a full-thickness acellular porcine bladder matrix for tissue engineering

scientific article published on 7 November 2006

Development and characterization of acellular allogeneic arterial matrices

scientific article published on 2 November 2011

Development and characterization of acellular porcine pulmonary valve scaffolds for tissue engineering ⬇️

scientific article published on 12 June 2014

Development and characterization of an acellular human pericardial matrix for tissue engineering

scientific article

Development and characterization of an acellular porcine cartilage bone matrix for use in tissue engineering ⬇️

scientific article published on August 19, 2011

Development and characterization of an acellular porcine medial meniscus for use in tissue engineering

scientific article published in April 2008

Development of methods for studying the differentiation of human mesenchymal stem cells under cyclic compressive strain

scientific article published on 13 December 2011

Disparity in race-specific comorbidities associated with central venous catheter-related bloodstream infection (AHRQ-PSI7).

scientific article published on 24 March 2013

Dynamic virtual simulation of the occurrence and severity of edge loading in hip replacements associated with variation in the rotational and translational surgical position ⬇️

scientific article published on 17 February 2017

Effect of an edge at cup rim on contact stress during micro-separation in ceramic-on-ceramic hip joints ⬇️

scientific article published on September 2017

Effect of bearing size on the long-term wear, wear debris, and ion levels of large diameter metal-on-metal hip replacements-An in vitro study

scientific article published in October 2008

Effect of clearance on cartilage tribology in hip hemi-arthroplasty

scientific article

Effect of conformity and contact stress on wear in fixed-bearing total knee prostheses

scientific article published on 12 June 2009

Effect of cup abduction angle and head lateral microseparation on contact stresses in ceramic-on-ceramic total hip arthroplasty

scientific article published on 26 November 2011

Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic‐on‐ceramic total hip replacement ⬇️

scientific article published on November 1, 2010

Effect of femoral head size on the wear of metal on metal bearings in total hip replacements under adverse edge-loading conditions ⬇️

scientific article published on 20 December 2012

Effect of head contact on the rim of the cup on the offset loading and torque in hip joint replacement ⬇️

scientific article published on July 25, 2013

Effect of microseparation on contact mechanics in metal-on-metal hip replacements-A finite element analysis ⬇️

scientific article published on 5 November 2014

Effect of motion inputs on the wear prediction of artificial hip joints

scientific article

Effect of simplifications of bone and components inclination on the elastohydrodynamic lubrication modeling of metal-on-metal hip resurfacing prosthesis ⬇️

scientific article

Effect of swing phase load on metal-on-metal hip lubrication, friction and wear

scientific article published on 6 September 2005

Enhanced computational prediction of polyethylene wear in hip joints by incorporating cross-shear and contact pressure in additional to load and sliding distance: effect of head diameter

scientific article published on 3 March 2009

Evaluation of a new methodology to simulate damage and wear of polyethylene hip replacements subjected to edge loading in hip simulator testing

scientific article

Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. ⬇️

scientific article published on 30 May 2014

Factors Influencing the Oxygen Consumption Rate of Aortic Valve Interstitial Cells: Application to Tissue Engineering

scholarly article by Ling Wang et al published 14 January 2009 in Tissue Engineering. Part A

Factors influencing the oxygen consumption rate of aortic valve interstitial cells: application to tissue engineering

scientific article published in September 2009

Fluid load support and contact mechanics of hemiarthroplasty in the natural hip joint ⬇️

scientific article published on October 15, 2010

Friction of total hip replacements with different bearings and loading conditions

scientific article published in May 2007

Generation of a large volume of clinically relevant nanometre-sized ultra-high-molecular-weight polyethylene wear particles for cell culture studies ⬇️

scientific article

Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: an initial study ⬇️

scientific article published on 24 June 2015

Hemiarthroplasty of hip joint: An experimental validation using porcine acetabulum ⬇️

scientific article published on March 24, 2011

High cup angle and microseparation increase the wear of hip surface replacements

scientific article

Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing ⬇️

scientific article published on 14 June 2014

Hydrodynamic function of the second-generation mitroflow pericardial bioprosthesis.

scientific article

Immunogenicity of undifferentiated and differentiated allogeneic mouse mesenchymal stem cells ⬇️

scientific article

In vitro comparison of fixed- and mobile meniscal-bearing unicondylar knee arthroplasties: effect of design, kinematics, and condylar liftoff

scientific article published on 11 April 2012

In vitro investigation of friction under edge-loading conditions for ceramic-on-ceramic total hip prosthesis

scientific article published in August 2010

In-vitro assessment of the functional performance of the decellularized intact porcine aortic root

scientific article published in May 2005

Influence of acetabular cup rim design on the contact stress during edge loading in ceramic-on-ceramic hip prostheses

scientific article published on 9 February 2010

Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: a finite element study with biphasic acetabular cartilage properties ⬇️

scientific article published on 21 June 2014

Influence of conformity on the wear of total knee replacement: An experimental study ⬇️

scientific article published in December 2017

Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings ⬇️

scientific article published on May 2016

Influence of kinematics on the wear of a total ankle replacement ⬇️

scientific article published on 8 January 2017

Interaction of micron and nano-sized particles with cells of the dura mater ⬇️

scientific article

Investigation of the antiadhesive properties of human mesothelial cells cultured in vitro on implantable surgical materials

scientific article published in January 2009

Investigation of the regenerative capacity of an acellular porcine medial meniscus for tissue engineering applications

scientific article

Kinematics of synthetic flexible leaflet heart valves during accelerated testing.

scientific article published in January 2003

Long-term clinical, radiological and histopathological follow-up of a well-fixed Mckee-Farrar metal-on-metal total hip arthroplasty

scientific article published in June 2005

Long-term radiographic assessment of cemented polyethylene acetabular cups

scientific article published on 10 January 2008

Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation

scientific article published in August 2003

Metal-on-metal bearing wear with different swing phase loads

scientific article published in August 2004

Oncological control associated with surgical resection of isolated retroperitoneal lymph node recurrence of renal cell carcinoma

scientific article

PEEK and CFR-PEEK as alternative bearing materials to UHMWPE in a fixed bearing total knee replacement: An experimental wear study ⬇️

scientific article published on March 2017

PEEK-OPTIMA™ as an alternative to cobalt chrome in the femoral component of total knee replacement: A preliminary study ⬇️

scientific article published on 16 September 2016

Predictors of Postoperative Complications in Patients Who Undergo Radical Nephrectomy and IVC Thrombectomy: A Large Contemporary Tertiary Center Analysis

scientific article published on 25 September 2015

Production of an acellular amniotic membrane matrix for use in tissue engineering

scientific article published on August 2006

Quantification of pulmonary autograft characteristics using magnetic resonance imaging.

scientific article published in January 2004

Quantification of the effect of cross-shear and applied nominal contact pressure on the wear of moderately cross-linked polyethylene ⬇️

scientific article published in January 2013

Quantification of the effect of cross-shear on the wear of conventional and highly cross-linked UHMWPE

scientific article published on 22 October 2007

Regenerative potential of low-concentration SDS-decellularized porcine aortic valved conduits in vivo ⬇️

scientific article

Regional biomechanical and histological characterisation of the passive porcine urinary bladder: Implications for augmentation and tissue engineering strategies

scientific article

Regional cartilage properties of three quadruped tibiofemoral joints used in musculoskeletal research studies

scientific article published in August 2012

Representing the effect of variation in soft tissue constraints in experimental simulation of total knee replacements ⬇️

scholarly article by Helena Johnston et al published November 2018 in Journal of the Mechanical Behavior of Biomedical Materials

Review: tissue engineering of the urinary bladder: considering structure-function relationships and the role of mechanotransduction

scientific article

Robust and general method for determining surface fluid flow boundary conditions in articular cartilage contact mechanics modeling

scientific article published in March 2010

Scratching vulnerability of conventional vs highly cross-linked polyethylene liners because of large embedded third-body particles

scientific article published on 23 November 2011

Self-assembling peptides as injectable lubricants for osteoarthritis

scientific article published in August 2006

Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation

scientific article published in September 2003

Simple geometry tribological study of osteochondral graft implantation in the knee ⬇️

scientific article published in January 2018

Simulation of polyethylene wear in ankle joint prostheses

scientific article published in April 2007

Spectral characterization of squeaking in ceramic-on-ceramic total hip arthroplasty: comparison of in vitro and in vivo values

scientific article published on 10 August 2011

Squeaking hip arthroplasties: a tribological phenomenon

scientific article

Surface engineering: a low wearing solution for metal-on-metal hip surface replacements

scientific article published in August 2009

The 2007 Otto Aufranc Award. Ceramic-on-metal hip arthroplasties: a comparative in vitro and in vivo study

scientific article published in December 2007

The biological response to nanometre-sized polymer particles ⬇️

scientific article

The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities ⬇️

scientific article published on 4 April 2016

The effect of anterior-posterior shear on the wear of CHARITÉ total disc replacement

scientific article published in April 2012

The effect of collagen fibril orientation on the biphasic mechanics of articular cartilage ⬇️

scientific article published on 13 September 2016

The effect of cup orientation and coverage on contact mechanics and range of motion of metal-on-metal hip resurfacing arthroplasty

scientific article published in November 2012

The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements ⬇️

scientific article published on 3 September 2015

The effect of hyaluronic acid and phospholipid based lubricants on friction within a human cartilage damage model

scientific article published on 15 May 2006

The effect of insert conformity and material on total knee replacement wear ⬇️

scientific article published on 2 December 2013

The effects of geometric uncertainties on computational modelling of knee biomechanics ⬇️

scientific article published on 9 August 2017

The effects of irradiation dose and storage time following treatment on the viscoelastic properties of decellularised porcine super flexor tendon ⬇️

scientific article published on 19 April 2017

The effects of irradiation on the biological and biomechanical properties of an acellular porcine superflexor tendon graft for cruciate ligament repair ⬇️

scientific article published on 23 September 2016

The influence of clearance on friction, lubrication and squeaking in large diameter metal-on-metal hip replacements ⬇️

scientific article published on 8 November 2007

The influence of kinematic conditions and design on the wear of patella-femoral replacements ⬇️

scientific article

The influence of malalignment and ageing following sterilisation by gamma irradiation in an inert atmosphere on the wear of ultra-high-molecular-weight polyethylene in patellofemoral replacements ⬇️

scientific article

The influence of molecular weight, crosslinking and counterface roughness on TNF-alpha production by macrophages in response to ultra high molecular weight polyethylene particles

scientific article published in August 2004

The influence of simulator input conditions on the wear of total knee replacements: An experimental and computational study ⬇️

scientific article published on May 2016

The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers ⬇️

scientific article

The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint ⬇️

scientific article published on 4 April 2016

The lubrication performance of the ceramic-on-ceramic hip implant under starved conditions ⬇️

scientific article

The osteolytic response of macrophages to challenge with particles of Simplex P, Endurance, Palacos R, and Vertebroplastic bone cement particles in vitro

scientific article published in October 2005

The pulmonary bioprosthetic heart valve: its unsuitability for use as an aortic valve replacement.

scientific article published in September 2002

The quantification of pulmonary valve haemodynamics using MRI.

scientific article published in June 2002

The role of macrophages in osteolysis of total joint replacement

scientific article published in April 2005

The use of ultrasonication to aid recellularization of acellular natural tissue scaffolds for use in anterior cruciate ligament reconstruction

scientific article published in July 2007

Three-dimensional modeling of in vitro hip kinematics under micro-separation regime for ceramic on ceramic total hip prosthesis: an analysis of vibration and noise

scientific article published on 4 November 2009

Tissue engineering of cardiac valve prostheses I: development and histological characterization of an acellular porcine scaffold

scientific article published in July 2002

Tissue engineering of cardiac valves: re-seeding of acellular porcine aortic valve matrices with human mesenchymal progenitor cells.

scientific article published on November 2005

Tissue engineering small-diameter vascular grafts: preparation of a biocompatible porcine ureteric scaffold

scientific article

Tribology and wear of metal-on-metal hip prostheses: influence of cup angle and head position

scientific article published in August 2008

Tribology of alternative bearings

scientific article published in December 2006

Tribology studies of the natural knee using an animal model in a new whole joint natural knee simulator ⬇️

scientific article published on 11 August 2015

Undetected Fracture of an Alumina Ceramic on Ceramic Hip Prosthesis

Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking ⬇️

scientific article published on 28 February 2015

Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters

Wear characteristics of an unconstrained lumbar total disc replacement under a range of in vitro test conditions ⬇️

scientific article published on 28 September 2015

Wear of 36-mm BIOLOX® delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions ⬇️

scientific article published on February 8, 2013

Wear of ceramic‐on‐carbon fiber‐reinforced poly‐ether ether ketone hip replacements ⬇️

scientific article published on March 27, 2012

Wear of composite ceramics in mixed-material combinations in total hip replacement under adverse edge loading conditions ⬇️

scientific article

Wear of crosslinked polyethylene under different tribological conditions

scientific article published in March 2006

Wear of moderately cross-linked polyethylene in fixed-bearing total knee replacements ⬇️

scientific article published on July 1, 2012

Wear of novel ceramic‐on‐ceramic bearings under adverse and clinically relevant hip simulator conditions ⬇️

scientific article published on June 7, 2013

Wear of surface-engineered metal-on-metal bearings for hip prostheses under adverse conditions with the head loading on the rim of the cup ⬇️

scientific article published on December 6, 2012

Wear, debris, and biologic activity of cross-linked polyethylene in the knee: benefits and potential concerns

scientific article published in November 2004

Wear-simulation analysis of rotating-platform mobile-bearing knees

scientific article published in September 2006

Paulina is supported by:

About Paulina

Help