List of works by Veena Sahajwalla

A novel approach for reducing toxic emissions during high temperature processing of electronic waste.

scientific article published on 9 March 2017

Agglomeration Behavior of Non-Metallic Particles on the Surface of Ca-Treated High-Carbon Liquid Steel: An In Situ Investigation

Application of High-Resolution NMR and GC-MS to Study Hydrocarbon Oils Derived from Noncatalytic Thermal Transformation of e-Waste Plastics

scientific article published on 16 August 2018

Application of fly ash as a catalyst for synthesis of carbon nanotube ribbons

scientific article published on 27 May 2011

Boron doped graphene wrapped silver nanowires as an efficient electrocatalyst for molecular oxygen reduction

scientific article

Cascading use of textile waste for the advancement of fibre reinforced composites for building applications

article by Claudia A. Echeverria et al published October 2018 in Journal of Cleaner Production

Chapter 15 Green Manufacturing: From Waste to Value Added Materials

Characteristics of waste automotive glasses as silica resource in ferrosilicon synthesis.

scientific article

Concentration of precious metals during their recovery from electronic waste.

scientific article published on 17 December 2015

Corrosion Behaviour of Dual-Phase High Carbon Steel—Microstructure Influence

Cost-effective and sustainable approach to transform end-of-life vinyl banner to value added product

Direct Transformation of Metallized Paper into Al-Si Nano-Rod and Al Nano-Particles Using Thermal Micronizing Technique

scientific article published on 12 October 2018

Direct transformation of waste printed circuit boards to nano-structured powders through mechanical alloying

Disentanglement of random access memory cards to regenerate copper foil: A novel thermo-electrical approach

scientific article published on 09 October 2018

Effect of selective-precipitations process on the corrosion resistance and hardness of dual-phase high-carbon steel

scientific article published on 30 October 2019

Effect of small addition of Cr on stability of retained austenite in high carbon steel

article

Effective Separation of CO2 Using Metal-Incorporated rGO Membranes

scientific article published on 17 March 2020

Elastic Recoil Detection Analysis of FeN thin films

scientific article published on 26 June 2012

Engulfment Behavior of Inclusions in High-Carbon Steel: Theoretical and Experimental Investigation

Enhancing Corrosion Resistance and Hardness Properties of Carbon Steel through Modification of Microstructure

Enhancing steel properties through in situ formation of ultrahard ceramic surface.

scientific article published on 08 December 2016

Evolution of Microstructure and Hardness of High Carbon Steel under Different Compressive Strain Rates

article published in 2018

Extraordinary water adsorption characteristics of graphene oxide.

scientific article

Formation of carbyne-like materials during low temperature pyrolysis of lignocellulosic biomass: A natural resource of linear sp carbons

scientific article published on 4 December 2017

From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics

scholarly article by Mohannad Mayyas et al published July 2016 in Journal of Analytical and Applied Pyrolysis

From waste glass to building materials – An innovative sustainable solution for waste glass

From waste to surface modification of aluminum bronze using selective surface diffusion process

scientific article published in Scientific Reports

Generation of copper rich metallic phases from waste printed circuit boards.

scientific article published on 19 July 2014

Graphene and graphene oxide for desalination.

scientific article published on 30 November 2015

Green Manufacturing: A Key to Innovation Economy

article

High temperature investigations on optimising the recovery of copper from waste printed circuit boards.

scientific article published on 12 January 2017

High temperature transformations of waste printed circuit boards from computer monitor and CPU: Characterisation of residues and kinetic studies.

scientific article published on 17 November 2015

Hybrid structure of white layer in high carbon steel - Formation mechanism and its properties.

scientific article published on 16 October 2017

In situ characterisation of MnS precipitation in high carbon steel

scientific article published on 12 July 2019

Investigation on the Reduction Behavior of Coal Composite Pellet at Temperatures between 1373 and 1573 K

Manganese oxide synthesized from spent Zn-C battery for supercapacitor electrode application

scientific article published on 20 June 2019

Material Microsurgery: Selective Synthesis of Materials via High-Temperature Chemistry for Microrecycling of Electronic Waste

scientific article published on 13 July 2020

Mechanism of water transport in graphene oxide laminates

scientific article

Nano-carbons from waste tyre rubber: An insight into structure and morphology

scientific article published on 14 August 2017

On the mechanism of gas adsorption for pristine, defective and functionalized graphene.

scientific article published on 13 February 2017

Preliminary investigation on the thermal conversion of automotive shredder residue into value-added products: Graphitic carbon and nano-ceramics

scientific article published on 11 February 2016

Production of nickel bio-ore from hyperaccumulator plant biomass: applications in phytomining

scientific article published on 01 May 2004

Recovery of heavy metals from waste printed circuit boards: statistical optimization of leaching and residue characterization

scientific article published on 22 June 2019

Recycling of the scrap LCD panels by converting into the InBO3 nanostructure product

scientific article published on 12 November 2019

Rethinking circular economy for electronics, energy storage, and solar photovoltaics with long product life cycles

scientific article published in 2023

Revealing the mechanism of extraordinary hardness without compensating the toughness in a low alloyed high carbon steel

scientific article published on 13 January 2020

Selective isolation of heavy metals from spent electronic waste solution by macroporous ion-exchange resins

scientific article published on 04 March 2019

Selective synthesis of CuNi alloys using waste PCB and NiMH battery

scientific article published on 05 January 2019

Selective thermal transformation of old computer printed circuit boards to Cu-Sn based alloy.

scientific article published on 15 May 2017

Simulation of Marine Bio-Composite Using Empirical Data Combined with Finite Element Technique

Solid State Phase Transformation Mechanism in High Carbon Steel Under Compressive Load and with Varying Cr Percent

Specific molecular structure changes and radical evolution during biomass-polyethylene terephthalate co-pyrolysis detected by (13)C and (1)H solid-state NMR.

scientific article

Stability of retained austenite in high carbon steel under compressive stress: an investigation from macro to nano scale

scientific article published on 11 October 2016

Surface Modification of Steel Using Automotive Waste as Raw Materials

Synthesis of calcium silicate from selective thermal transformation of waste glass and waste shell

Synthesis of copper-tin nanoparticles from old computer printed circuit boards

The effect of microstructure, filler load and surface adhesion of marine bio-fillers, in the performance of Hybrid Wood-Polypropylene Particulate Bio-composite

Thermal Transformation of Waste Toner Powder into a Value-Added Ferrous Resource

Thermal and mechanical stability of retained austenite in high carbon steel: An in - situ investigation

Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons as a Process Byproduct

Transforming automotive waste into TiN and TiC ceramics

Two-step pre-processing enrichment of waste printed circuit boards: Mechanical milling and physical separation

article by Rasoul Khayyam Nekouei et al published May 2018 in Journal of Cleaner Production

Waste conversion into high-value ceramics: Carbothermal nitridation synthesis of titanium nitride nanoparticles using automotive shredder waste.

scientific article published on 3 December 2016

Waste glass powder – Innovative value-adding resource for hybrid wood-based products

Waste-cleaning waste: synthesis of ZnO porous nano-sheets from batteries for dye degradation

scientific article published on 09 August 2018

Zinc Oxide Nanoparticles from Waste Zn-C Battery via Thermal Route: Characterization and Properties

scientific article published on 12 September 2018

Paulina is supported by:

About Paulina

Help