3D Porous Ti3C2 MXene/NiCo-MOF Composites for Enhanced Lithium Storage

scientific article published on 07 April 2020

A Highly Flexible Supercapacitor Based on MnO₂/RGO Nanosheets and Bacterial Cellulose-Filled Gel Electrolyte

scientific article published on 30 October 2017

A New Route of Fucoidan Immobilization on Low Density Polyethylene and Its Blood Compatibility and Anticoagulation Activity

scientific article

A Physicochemical Approach to Render Antibacterial Surfaces on Plasma-Treated Medical-Grade PVC: Irgasan Coating

A facile prestrain-stick-release assembly of stretchable supercapacitors based on highly stretchable and sticky hydrogel electrolyte

A note on secondary electrorheological patterns

A novel multistep method for chondroitin sulphate immobilization and its interaction with fibroblast cells

scientific article

A self-healable and easily recyclable supramolecular hydrogel electrolyte for flexible supercapacitors

A strong and sticky hydrogel electrolyte for flexible supercapacitors

Adaptation of polystyrene/multi-wall carbon nanotube composite properties in respect of its thermal stability

Aging bulk modulus obtained from enthalpy and volume relaxations of a-PMMA and its blends with PEO

Aluminosilicate-filled composites of PVA–PVP—An improved biodegradable polymeric material

scholarly article by Nabanita Saha et al published 2006 in Journal of Applied Polymer Science

An in vitro bacterial adhesion assessment of surface-modified medical-grade PVC.

scientific article published on 11 February 2010

Antibacterial performance of ZnO-based fillers with mesoscale structured morphology in model medical PVC composites

scientific article published on 26 April 2014

Antibacterial performance of alginic acid coating on polyethylene film.

scientific article

Antibacterial poly(vinyl alcohol) film containing silver nanoparticles: Preparation and characterization

Antibacterial polyvinyl chloride/antibiotic films: The effect of solvent on morphology, antibacterial activity, and release kinetics

Anticoagulant Polyethylene Terephthalate Surface by Plasma-Mediated Fucoidan Immobilization.

scientific article published on 28 April 2019

Antimicrobial Silver Nitrate-doped Polyvinyl Chloride Cast Films: Influence of Solvent on Morphology and Mechanical Properties

article published in 2013

Bacterial cellulose based greener packaging material: a bioadhesive polymeric film

Bacteriostatic activity of fluoroquinolone coatings on polyethylene films

Biocompatibility and Biological Efficiency of Inorganic Calcium Filled Bacterial Cellulose Based Hydrogel Scaffolds for Bone Bioengineering

scientific article published on 11 December 2018

Biocompatibility of polyaniline

Biodegradation of Blown Films Based on Poly(lactic acid) under Natural Conditions

scholarly article by Vladimír Sedlařík et al published November 2008 in Macromolecular Symposia

Biodegradation of PVP-CMC hydrogel film: a useful food packaging material.

scientific article published on 20 March 2012

Biomimetic nucleation and growth of CaCO3 in bacterial cellulose produced by Gluconacetobacter xylinus (Acetobacter xylinus)

scholarly article by Radek Vyroubal et al published July 2013 in Current Opinion in Biotechnology

Breathable and Polyol Based Hydrogel Food Packaging

Calcium Phosphate Incorporated Bacterial Cellulose-Polyvinylpyrrolidone Based Hydrogel Scaffold: Structural Property and Cell Viability Study for Bone Regeneration Application

scientific article published on 06 November 2019

Calcium phosphate and calcium carbonate mineralization of bioinspired hydrogels based on β-chitin isolated from biomineral of the common cuttlefish (Sepia officinalis, L.)

Cell proliferation of HaCaT keratinocytes on collagen films modified by argon plasma treatment.

scientific article

Characterization of Antibacterial Polymeric Films Based on Poly(vinyl alcohol) and Zinc Nitrate for Biomedical Applications

Characterization of Antibacterial, Mechanical, and Structural Properties of Polyvinyl Chloride/Silver Nitrate Composites Prepared by Thermoplastic Compounding

Characterization of Carbon Nanotube Based Polymer Composites Through Rheology

Characterization of polymeric biocomposite based on poly(vinyl alcohol) and poly(vinyl pyrrolidone)

Chitosan Modified by Kombucha-Derived Bacterial Cellulose: Rheological Behavior and Properties of Convened Biopolymer Films

scientific article published on 28 October 2022

Chitosan–silver nanocomposites: New functional biomaterial for health-care applications

article

Colloidal polyaniline dispersions: antibacterial activity, cytotoxicity and neutrophil oxidative burst

scientific article published on 25 January 2014

Conducting polypyrrole confined in ordered mesoporous silica SBA-15 channels: Preparation and its electrorheology

Conductivity of flowing polyaniline suspensions in electric field

Conductivity of polyaniline/1,2,4-trichlorobenzene composites during freezing and melting transitions

Construction of Hierarchical CuO/Cu₂O@NiCo₂S₄ Nanowire Arrays on Copper Foam for High Performance Supercapacitor Electrodes

scientific article published on 15 September 2017

Controlled synthesis of hierarchical polyaniline nanowires/ordered bimodal mesoporous carbon nanocomposites with high surface area for supercapacitor electrodes

article published in 2013

Controlled synthesis of mesoporous carbon nanosheets and their enhanced supercapacitive performance

article published in 2013

Core-shell Structured Polypyrrole-coated Magnetic Carbonyl Iron Microparticles and their Magnetorheology

Correlation between coprecipitation reaction course and magneto-structural properties of iron oxide nanoparticles

Correlation between the microstructure and the electromagnetic properties of carbonyl iron filled polymer composites

article published in 2007

Correlation of Morphology and Viscoelastic Properties of Partially Biodegradable Polymer Blends Based on Polyamide 6 and Polylactide Copolyester

scholarly article by Pavel Kucharczyk et al published October 2012 in Polymer-Plastics Technology and Engineering

Co₃O₄@CoS Core-Shell Nanosheets on Carbon Cloth for High Performance Supercapacitor Electrodes

scientific article published on June 2017

Cytotoxicity of poly(p-phenylenediamine)

Deformation theory of an electro-conductive composite composed of entangled network of carbon nanotubes embedded in elastic polyurethane

scholarly article published 2013

Deposition of PbS particles from a nonaqueous chemical bath at room temperature

Design rules for carbazole derivatized n-alkyl methacrylate polymeric memristors

Determination of compounding formulation of cured rubber by reverse engineering

scholarly article in Polymer Engineering and Science, vol. 55 no. 6, April 2015

Development and Characterization of Novel Medicated Hydrogels for Wound Dressing

article

Dual Crosslinked Collagen/Chitosan Film for Potential Biomedical Applications

scientific article published on 14 December 2019

Ecofriendly Synthesis of Silver Nanoparticles from Garden Rhubarb (Rheum rhabarbarum)

Effect of Iron-Oxide Nanoparticles Impregnated Bacterial Cellulose on Overall Properties of Alginate/Casein Hydrogels: Potential Injectable Biomaterial for Wound Healing Applications

scientific article published on 14 November 2020

Effect of Phase Arrangement on Solid State Mechanical and Thermal Properties of Polyamide 6/Polylactide Based Co-polyester Blends

Effect of Strain on Viscoelastic Behavior of PVP-CMC Based Medicated Hydrogels

Effect of coating of graphite particles with polyaniline base on charge transport in epoxy-resin composites

Effect of field strength and temperature on viscoelastic properties of electrorheological suspensions of urea-modified silica particles

Effect of hydrophilicity of polyaniline particles on their electrorheology: steady flow and dynamic behaviour

scientific article published on 23 February 2010

Effect of phenolic resin infiltration content on the structural and electrochemical properties of hierarchical porous carbons

Effect of salt concentration and temperature on the rheological properties of guar gum-dead sea salt gel

Effect of strain on viscoelastic behavior of fresh, swelled and mineralized PVP-CMC hydrogel

Effectiveness of Polymer Sheet Layer to Protect Hydrogel Dressings

Effects of macropore size on structural and electrochemical properties of hierarchical porous carbons

Electrical Properties and SEM Study of Foamed EBA/Carbon Black Composites

Electrical and electrorheological behavior of poly(aniline-co-1,4-phenylenediamine) suspensions

Electrical conductivity of epoxy/silicone/carbon black composites: Effect of composite microstructure

Electrical properties of composites of hard metal carbides in a polymer matrix

Electromagnetic absorption efficiency of polypropylene/montmorillonite/polypyrrole nanocomposites

Electromagnetic properties of aluminosilicate-filled polymer composites of poly(vinyl alcohol)-poly(vinyl pyrrolidone)

Electromagnetic radiation shielding by composites of conducting polymers and wood

Electromechanical properties of carbon nanotube networks under compression

Electron paramagnetic resonance study of free-radical kinetics in ultraviolet-light cured dimethacrylate copolymers

scientific article published on 01 May 1998

Electrorheological Properties of Suspensions of Polypyrrole Ribbon Particles in Silicone Oil

Electrorheological activity of polyphenylenediamine suspensions in silicone oil

Electrorheological characteristics of polyaniline/titanate composite nanotube suspensions

Electrorheological properties of new mesoporous material with conducting polypyrrole in mesoporous silica

Electrorheological properties of suspensions of silica nanoparticles modified by urea and N,N-dimethylformamide

Electrorheology of aniline oligomers

Electrorheology of polyaniline-coated inorganic particles in silicone oil

Electrorheology of polyaniline-coated silica particles in silicone oil

Enhanced Keratinocyte Cell Attachment to Atelocollagen Thin Films Through Air and Nitrogen Plasma Treatment

Enhancement of magnetic losses in hybrid polymer composites with MnZn-ferrite and conductive fillers

Entangled Network of Carbon Nanotubes Embedded in Polyurethane and its Use for Body Kinematics and Joint Flexion Sensing

Enthalpy and volume relaxation of PMMA, PC, and a-Se: evaluation of aging bulk moduli

Environmentally friendly biocomposites based on waste of the dairy industry and poly(vinyl alcohol)

Essential Oil Based PVP-CMC-BC-GG Functional Hydrogel Sachet for 'Cheese': Its Shelf Life Confirmed with Anthocyanin (Isolated from Red Cabbage) Bio Stickers

scientific article published on 09 March 2020

Ethyl({[acryloyl(furan-2-ylmethyl)amino]acetyl}amino)acetate

Evaluation of the structure (or nonlinearity) parameter x by peak-shift method from volumetric heating data of PET

Extrusion of polyethylene/polypropylene blends with microfibrillar-phase morphology

Fabrication of polyaniline/mesoporous carbon/MnO2 ternary nanocomposites and their enhanced electrochemical performance for supercapacitors

Facile fabrication and characterization of novel polyaniline/titanate composite nanotubes directed by block copolymer

Few-layer MoS 2 nanosheets incorporated into hierarchical porous carbon for lithium-ion batteries

Flexible polyvinyl alcohol/2-hydroxypropanoic acid films: effect of residual acetyl moieties on mechanical, thermal and antibacterial properties

Flexible textile electrode with high areal capacity from hierarchical V 2 O 5 nanosheet arrays

article by Kun Ma et al published July 2017 in Journal of Power Sources

Functionalization of polylactic acid through direct melt polycondensation in the presence of tricarboxylic acid

Functionalized Multi-Walled Carbon Nanotube Paper for Monitoring Chemical Vapors

scientific article

Functionalized polyanilines made by nucleophilic addition reaction, applied in gas sensors field

article

Green synthesis of silver nanoparticles and biopolymer nanocomposites: a comparative study on physico-chemical, antimicrobial and anticancer activity

HaCaT Keratinocytes Response on Antimicrobial Atelocollagen Substrates: Extent of Cytotoxicity, Cell Viability and Proliferation

scientific article

Hierarchical PANI/NiCo-LDH Core-Shell Composite Networks on Carbon Cloth for High Performance Asymmetric Supercapacitor

scientific article published on 03 April 2019

High energy-density organic supercapacitors based on optimum matching between GNS/ a MWCNT@polyaniline nanocone arrays cathode and GNS/ a MWCNT@poly(1,5-diaminoanthraquinone) nanoparticles anode

Hybrid nanostructured Ag/ZnO decorated powder cellulose fillers for medical plastics with enhanced surface antibacterial activity.

scientific article

Hydrothermal effect and mechanical stress properties of carboxymethylcellulose based hydrogel food packaging

scientific article published on 15 October 2014

Importance of Viscoelastic Property Measurement of a New Hydrogel for Health Care

article

Improved Selectivity of Oxidized Multiwall Carbon Nanotube Network for Detection of Ethanol Vapor

Improvement in techniques for the determination of extensional rheological data from entrance flows: computational and experimental analysis

In vitro study of partially hydrolyzed poly(2-ethyl-2-oxazolines) as materials for biomedical applications.

scientific article published on 18 March 2015

Influence of geometrical parameters of screw melt mixing on visco-elastic properties of PC/ABS blends

Influence of particle concentration on the electrorheological efficiency of polyaniline suspensions

Influence of temperature, pH and simulated biological solutions on swelling and structural properties of biomineralized (CaCO3) PVP-CMC hydrogel

scientific article published on 2 November 2015

Interface-engineered MoS 2 /C nanosheet heterostructure arrays for ultra-stable sodium-ion batteries

Investigating the role of transreactions on degradation behavior of phenoxy/poly(trimethylene terephthalate)/clay nanocomposites using thermal analysis techniques

Isobaric heating of polystyrene and evaluation of the Narayanaswamy parameter x from volume recovery data

Kinetics of coarsening in immiscible poly (ɛ-caprolactone)/poly(styrene-co-acrylonitrile) blends

Lactose-filled composites of metallocene linear low-density polyethylene and their degradation in the composting environment

Linear viscoelastic and morphological description of multiphase systems affected by processing parameters

Maghemite based silicone composite for arterial embolization hyperthermia

scientific article published on 19 December 2014

Mineralized polymer composites as biogenic bone substitute material

MnO2 nanoflake/polyaniline nanorod hybrid nanostructures on graphene paper for high-performance flexible supercapacitor electrodes

article

MnO2 nanoflakes/hierarchical porous carbon nanocomposites for high-performance supercapacitor electrodes

MnO2/polyaniline hybrid nanostructures on carbon cloth for supercapacitor electrodes

Mo-Triggered amorphous Ni3S2 nanosheets as efficient and durable electrocatalysts for water splitting

Modification of polymers by protein hydrolysate?A way to biodegradable materials

scholarly article by Nabanita Saha et al published November 2003 in Polymers for Advanced Technologies

Morphology, absorptivity and viscoelastic properties of mineralized PVP-CMC hydrogel

Morphology-controllable synthesis of MnO2 hollow nanospheres and their supercapacitive performance

N-[2-(Cyclohexylamino)-2-oxoethyl]-N-(4-octyloxy)phenyl-prop-2-enamide

Novel hydrogels of PVP-CMC and their swelling effect on viscoelastic properties

On Pressure Affected Shear Viscosity of Poly(Lactic) Acid

On the characterization of sodium alginate/gelatine-based hydrogels for wound dressing

On the development and characterisation of crosslinked sodium alginate/gelatine hydrogels.

scientific article published on 30 November 2012

On the effect of pressure on the shear and elongational viscosities of polymer melts

scholarly article in Polymer Engineering and Science, vol. 44 no. 7, 2004

Optimization of powder injection molding of feedstock based on aluminum oxide and multicomponent water-soluble polymer binder

scholarly article by Berenika Hausnerová et al published 23 March 2011 in Polymer Engineering and Science

Optimization of the reaction conditions and characterization of L-lactic acid direct polycondensation products catalyzed by a non-metal-based compound

PVP - CMC hydrogel: An excellent bioinspired and biocompatible scaffold for osseointegration

scientific article published on 18 April 2018

Peptoids and polypeptoids: biomimetic and bioinspired materials for biomedical applications

Permeability and Biocompatibility of Novel Medicated Hydrogel Wound Dressings

Phenolic compounds from Allium schoenoprasum, Tragopogon pratensis and Rumex acetosa and their antiproliferative effects.

scientific article

Plasma Treatment as a Way of Increasing the Selectivity of Carbon Nanotube Networks for Organic Vapor Sensing Elements

Poly(methyl methacrylate)/Multi-wall Carbon Nanotubes Composites Prepared by Solvent Cast Technique: Composites Electrical Percolation Threshold

Polyaniline/reduced graphene oxide hydrogel film with attached graphite current collector for flexible supercapacitors

Polymer Based Bioadhesive Biomaterials for Medical Application-A Perspective of Redefining Healthcare System Management

scientific article published on 16 December 2020

Polyphenolic extracts of edible flowers incorporated onto atelocollagen matrices and their effect on cell viability.

scientific article published on 30 October 2013

Polysaccharides coatings on medical-grade PVC: a probe into surface characteristics and the extent of bacterial adhesion.

scientific article

Polystyrene/multi-wall carbon nanotube composites prepared by suspension polymerization and their electrorheological behavior

Polyurethane/multiwalled carbon nanotube nanowebs prepared by an electrospinning process

Pre-exponential factor and activation energy of electrical conductivity in polyester resin/carbon fibre composites

Preparation and Characterization of Nonwoven Fibrous Biocomposites for Footwear Components

scientific article published on 16 December 2020

Preparation and Characterization of Poly (vinyl alcohol)/Lactic Acid Compounded Polymeric Films

Preparation and Characterization of a Bioartificial Polymeric Material: Bilayer of Cellulose Acetate-PVA

Preparation and characterisation of a new double-sided bio-artificial material prepared by casting of poly(vinyl alcohol) on collagen

scientific article published on 23 June 2012

Preparation and characterization of poly(vinyl alcohol)-poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications

Preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions

Preparation of CaCO3-based biomineralized polyvinylpyrrolidone-carboxymethylcellulose hydrogels and their viscoelastic behavior

Preparation of active antibacterial LDPE surface through multistep physicochemical approach II: graft type effect on antibacterial properties.

scientific article published on 12 September 2012

Preparation of active antibacterial biomaterials based on sparfloxacin, enrofloxacin, and lomefloxacin deposited on polyethylene

Preparation of bacterial cellulose based hydrogels and their viscoelastic behavior

Pressure-dependent viscosity of powder injection moulding compounds

Properties of biomineralized (CaCO3) PVP-CMC hydrogel with reference to its cytotoxicity

Recent Progress in Surface Modification of Polyvinyl Chloride.

scientific article published on 18 December 2012

Relative viscosity models and their application to capillary flow data of highly filled hard-metal carbide powder compounds

Resistive Sensors for Organic Vapors Based on Nanostructured and Chemically Modified Polyanilines

Rheological Behavior of Poly(methyl methacrylate) Dispersions Stabilized by a Diblock Copolymer. 2. Positive and Negative Electrorheological Effect†

Rheological performance of bacterial cellulose based nonmineralized and mineralized hydrogel scaffolds

Self-crosslinked chitosan/dialdehyde xanthan gum blended hypromellose hydrogel for the controlled delivery of ampicillin, minocycline and rifampicin

scientific article published on 16 November 2020

Sensing Element Made of Multi-Wall Carbon Nanotube Network for Organic Vapor Detection

Sensing Element Made of Multi-Wall Carbon Nanotube Network for Organic Vapor Detection

article

Significant Characteristics of Medical-Grade Polymer Sheets and their Efficiency in Protecting Hydrogel Wound Dressings: A Soft Polymeric Biomaterial

Size Dependent Heating Efficiency of Iron Oxide Single Domain Nanoparticles

Spinodal decomposition and succeeding crystallization in PCL/SAN blends

Stability Study of Novel Medicated Hydrogel Wound Dressings

Stress-strain Hysteresis of a Carbon Nanotube Network as Polymer Nanocomposite Filler under Cyclic Deformation

Structural and electrorheological properties of mesoporous silica modified with triethanolamine

Structure and conditioning effect on mechanical behavior of poly(vinyl alcohol)/calcium lactate biocomposites

Structure changes of electrorheological fluids based on polyaniline particles with various hydrophilicities and time dependence of shear stress and conductivity during flow

Study on biodegradability of protein filled polymer composites using dielectric measurements

scholarly article by Igor Tchmutin et al published December 2004 in Polymer Degradation and Stability

Superposed flow properties of ceramic powder-filled polymer melts

Surface-modified antibacterial TiO2/Ag+ nanoparticles: Preparation and properties

Surfactant-assisted polypyrrole/titanate composite nanofibers: Morphology, structure and electrical properties

Synthesis and Structural Characterization of Polyaniline/Mesoporous Carbon Nanocomposite

Synthesis and characterization of new mesoporous material with conducting polypyrrole confined in mesoporous silica

Synthesis and electrorheological characteristics of sea urchin-like TiO2 hollow spheres

Synthesis and electrorheological characteristics of titanate nanotube suspensions under oscillatory shear

scholarly article in Journal of Industrial and Engineering Chemistry, vol. 15 no. 4, July 2009

Synthesis and magnetorheological characteristics of ribbon-like, polypyrrole-coated carbonyl iron suspensions under oscillatory shear

Synthesis and structural properties of polypyrrole/nano-Y 2 O 3 conducting composite

Temperature-dependent instabilities in the capillary flow of a metallocene linear low-density polyethylene melt

Template-free synthesis of hollow poly(o-anisidine) microspheres and their electrorheological characteristics

The Effect of PVAc Solution Viscosity on Diameter of PVAc Nanofibres Prepared by Technology of Electrospinning

The Role of Diffusion-Controlled Growth in the Formation of Uniform Iron Oxide Nanoparticles with a Link to Magnetic Hyperthermia

The dynamic magnetoviscoelastic properties of biomineralized (Fe3O4) PVP-CMC hydrogel

The effect of compatibility of suspension particles with the oil medium on electrorheological efficiency

The effect of dielectric properties on the electrorheology of suspensions of silica particles coated with polyaniline

The effect of hydrolysis degree on the properties of antibacterial polymeric films based on poly(vinyl alcohol) and zinc sulphate for biomedical applications

scientific article published on 8 June 2010

The effect of microwave irradiation on poly(vinyl alcohol) dissolved in ethylene glycol

The effect of polyaniline layer deposited on silica particles on electrorheological and dielectric properties of their silicone–oil suspensions

The effect of powder characteristics on pressure sensitivity of powder injection moulding compounds

The effect of preparation temperature on the mechanical and antibacterial properties of poly(vinyl alcohol)/silver nitrate films

The effect of pressure deformation on dielectric and conducting properties of silicone rubber/polypyrrole composites in the percolation threshold region

The electrorheological efficiency of polyaniline particles with various conductivities suspended in silicone oil

The enhancement of the oxidation resistance of carbonyl iron by polyaniline coating and consequent changes in electromagnetic properties

The formation mechanism of iron oxide nanoparticles within the microwave-assisted solvothermal synthesis and its correlation with the structural and magnetic properties

scientific article published on 23 November 2015

The relation between relaxed enthalpy and volume during physical aging of amorphous polymers and selenium

Thermomagnetic stability and heat-resistance properties of carbonyl iron filled siloxanes

Thermoplastic modification of medical grade polyvinyl chloride with various antibiotics: effect of antibiotic chemical structure on mechanical, antibacterial properties, and release activity

Transient shear flow properties of carbon fiber-filled liquid crystalline polymer

Tuning the Molecular Sensitivity of Conductive Polymer Resistive Sensors by Chemical Functionalization

Ultrathin MnO2 nanoflakes grown on N-doped carbon nanoboxes for high-energy asymmetric supercapacitors

Ultraviolet photoinduced weak bonds in aryl-substituted polysilanes

scientific article published on 15 January 2007

Viscoelastic behavior of mineralized (CaCO3) chitin based PVP-CMC hydrogel scaffolds

Volume Relaxation Rate in a-PMMA and a-PMMA/PEO Amorphous Blends

Volume relaxation in amorphous and semicrystalline PET

‘Green’ synthesis of silver polymer Nanocomposites of poly (2-isopropenyl-2- oxazoline-co- N-vinylpyrrolidone) and its catalytic activity