Search filters

List of works by Mark K. Larson

3DEC simulations of dynamic direct shear tests considering joint roughness coefficient (JRC)

conference proceedings item published in 2023

A static fatigue constitutive law for joints in weak rock

conference proceedings item published in 1998

Application of particle flow code to evaluate a concept for detecting hazardous voids in surge piles using profile scanning

conference proceedings item published in 2001

Applying robust design to study the effects of stratigraphic characteristics on brittle failure and bump potential in a coal mine

conference proceedings item published in 2017

Applying robust design to study the effects of stratigraphic characteristics on brittle failure and bump potential in a coal mine

journal article published in 2018

Approaches to determine fault shear strength in large-scale direct shear test simulations using discrete fracture networks

conference proceedings item published in 2022

Assessment of floor heave associated with bumps in a longwall mine using the discrete element method

journal article published in 2022

Assessment of floor heave associated with bumps in a longwall mine using the discrete element method

conference proceedings item published in 2021

Assessment of floor heave associated with bumps in a longwall mine using the discrete element method

abstract published in 2022

Calibrating a caving model for sedimentary deposits - estimation of load distribution between gob and abutment

conference proceedings item published in 2016

Calibrating a caving model for sedimentary deposits - estimation of load distribution between gob and abutment

conference proceedings item published in 2018

Creep along weak planes in roof and how it affects stability

conference proceedings item published in 2000

Critical review of numerical stress analysis tools for deep coal longwall panels under strong strata

conference proceedings item published in 2009

Deep coal longwall panel design for strong strata: the influence of software choice on results

conference proceedings item published in 2009

Development of a 3D numerical tool for assessing the mechanical impact of a fault-rupture by normal fault on underground excavations

conference proceedings item published in 2019

Development of a fault-rupture environment in 3D: a numerical tool for examining the mechanical impact of a fault on underground excavations

journal article published in 2019

Development of a fault-rupture environment in 3D: a numerical tool for examining the mechanical impact of fault on underground excavations

conference proceedings item published in 2018

Development of a prototype borehole profilometer to estimate roof-bolt anchorage capacity from borehole roughness measurements - laboratory tests

conference proceedings item published in 2007

Development of stress measurement techniques in bump-prone coal for safety decisions

conference proceedings item published in 2000

Development of stress measurements and instrument placement techniques for longwall coal

conference proceedings item published in 2001

Effects of far-field shearing deformation on fracturing around an underground opening

conference proceedings item published in 2004

Effects of overburden characteristics on dynamic failure in underground coal mining

journal article published in 2017

Effects of overburden characteristics on dynamic failure in underground coal mining

conference proceedings item published in 2016

Effects of overburden characteristics on dynamic failure in underground coal mining

conference proceedings item published in 2018

Evaluation of bumps-prone potential regarding the spatial characteristics of cleat in coal pillars under highly stressed ground conditions

conference proceedings item published in 2017

Evaluation of bumps-prone potential regarding the spatial characteristics of cleat in coal pillars under highly stressed ground conditions

conference proceedings item published in 2018

Evaluation of the excavation damage zone associated with the mining methods for underground mine safety

conference proceedings item published in 2020

Evaluation of the excavation damage zone associated with the mining methods for underground mine safety

conference proceedings item published in June 2020

Experimental and numerical investigation of the engineering properties of a Utah coal considering the effect of anisotropy due to cleats

conference proceedings item published in 2018

Experimental study on the confinement-dependent characteristics of a Utah coal considering the anisotropy by cleats

journal article published in 2018

Geomechanics of reinforced cemented backfill in an underhand stope at the Lucky Friday Mine, Mullan, Idaho

NIOSH report of investigations published in 2001

Ground stress in mining (part 1): measurements and observations at two western U.S. longwall mines

NIOSH report of investigations published in 2020

Ground stress in mining (part 2): calibrating and verifying longwall stress models

NIOSH report of investigations published in 2020

In situ stress at the Lucky Friday Mine (in four parts). 3. Reanalysis of overcore measurements from the Star Mine

report of investigations published in 1995

Inferring mine floor properties from pillar size and floor heave

conference proceedings item published in 2013

Influence of mineralogical compositions on anisotropic burst-prone coal strength

conference proceedings item published in 2022

Instruments for monitoring stability of underground openings

conference/symposia proceeedings published in 2000

Investigation of the anisotropic confinement-dependent brittleness of a Utah coal

journal article published in 2021

Laboratory Investigation of Confinement-Dependent Mechanical Behavior of a Utah Coal

conference proceedings item published in 2018

Laboratory investigation of the anisotropic confinement-dependent brittle-ductile transition of a Utah coal

conference proceedings item published in 2020

Laboratory investigation of the anisotropic confinement-dependent brittle-ductile transition of a Utah coal

journal article published in 2021

Load transfer distance calibration of a coal panel scale model: a case study

conference proceedings item published in 2012

Load transfer distance measurements at two mines in the western U.S

conference proceedings item published in 2015

MULSIMNL/large: reviving a USBM tool for modeling coal mines

conference proceedings item published in 2015

MULSIMNL/large: reviving a USBM tool for modeling coal mines

conference proceedings item published in February 2015

Numerical assessment of the anisotropic strengths of a Utah coal considering the spatial characteristics of discontinuities using discrete fracture networks

conference proceedings item published in 2021

Numerical investigation of factors involved in a floor heave mechanism in a bump-prone coal mine

conference proceedings item published in 2019

Numerical parametric study of floor heave in gate roads caused by longwall-induced abutment loading

conference proceedings item published in 2020

Origin of mining-induced fractures through macroscale distortion

conference proceedings item published in 2004

Panel-scale modeling of a deep longwall panel: the MULSIM alternative

conference proceedings item published in 2013

Performance analysis of instruments used to measure stress change resulting from mining

conference proceedings item published in 2019

Preliminary assessment of particle flow code as a tool to assess ore pass safety

abstract published in 1998

Shear origin of tension in excavation-induced fractures

conference proceedings item published in 2003

Stability analysis of underground excavations in limestone under dynamic loading

conference proceedings item published in 2023

Stability of backfilled cross-panel entries during longwall mining

conference proceedings item published in 1998

Strength of Utah coal evaluated using laboratory tests with an unloading path

conference proceedings item published in 2022

Stress measurement of a jointed rock mass during drift development

conference proceedings item published in 1999

Stress measurements for safety decisions in longwall coal

conference proceedings item published in 2002

Stressout: a data reduction program for inferring stress state of rock having isotropic material properties: a user's manual

information circular published in 1992

Topography and coal seam initial stress estimation: a sensitivity study

conference proceedings item published in 2011

Use of strain-gauged rock bolts to measure rock mass strain during drift development

conference proceedings item published in 1999

User friendly finite element design of shafts and tunnels

conference proceedings item published in 2022

User-friendly finite element design of main entries, barrier pillars, and bleeder entries

conference proceedings item published in 2017

User-friendly finite element design of main entries, barrier pillars, and bleeder entries

journal article published in 2018

Using UT3PC and LaModel to aid the mine engineer in evaluating mine layout design

conference proceedings item published in 2023