Search filters

List of works by Bo Hyun Kim

3DEC simulations of dynamic direct shear tests considering joint roughness coefficient (JRC)

conference proceedings item published in 2023

A case study on longwall-induced rockmass permeability under medium cover: potential gas inflow implications

conference proceedings item published in 2022

Applying robust design to study the effects of stratigraphic characteristics on brittle failure and bump potential in a coal mine

journal article published in 2018

Approaches to determine fault shear strength in large-scale direct shear test simulations using discrete fracture networks

conference proceedings item published in 2022

Assessment of floor heave associated with bumps in a longwall mine using the discrete element method

journal article published in 2022

Assessment of floor heave associated with bumps in a longwall mine using the discrete element method ⬇️

abstract published in 2022

Comparison of measured and modeled casing deformations of a test well in a longwall abutment pillar

conference proceedings item published in 2022

Development of a 3D numerical tool for assessing the mechanical impact of a fault-rupture by normal fault on underground excavations ⬇️

conference proceedings item published in 2019

Development of a fault-rupture environment in 3D: a numerical tool for examining the mechanical impact of a fault on underground excavations

journal article published in 2019

Development of a fault-rupture environment in 3D: a numerical tool for examining the mechanical impact of fault on underground excavations ⬇️

conference proceedings item published in 2018

Dynamic fracture process analysis of controlled blasts to minimize the excavation damage zone in underground excavations ⬇️

conference proceedings item published in 2019

Evaluation of bumps-prone potential regarding the spatial characteristics of cleat in coal pillars under highly stressed ground conditions ⬇️

conference proceedings item published in 2017

Evaluation of bumps-prone potential regarding the spatial characteristics of cleat in coal pillars under highly stressed ground conditions ⬇️

conference proceedings item published in 2018

Evaluation of the excavation damage zone associated with the mining methods for underground mine safety ⬇️

conference proceedings item published in 2020

Evaluation of the excavation damage zone associated with the mining methods for underground mine safety ⬇️

conference proceedings item published in June 2020

Experimental and numerical investigation of the engineering properties of a Utah coal considering the effect of anisotropy due to cleats ⬇️

conference proceedings item published in 2018

Experimental study on the confinement-dependent characteristics of a Utah coal considering the anisotropy by cleats

journal article published in 2018

Identifying longwall-induced fracture zone height through core drilling ⬇️

conference proceedings item published in 2022

Identifying longwall-induced fracture zone height through core drilling

journal article published in 2022

Influence of mineralogical compositions on anisotropic burst-prone coal strength ⬇️

conference proceedings item published in 2022

Investigation of the anisotropic confinement-dependent brittleness of a Utah coal

journal article published in 2021

Laboratory Investigation of Confinement-Dependent Mechanical Behavior of a Utah Coal ⬇️

conference proceedings item published in 2018

Laboratory investigation of the anisotropic confinement-dependent brittle-ductile transition of a Utah coal ⬇️

conference proceedings item published in 2020

Laboratory investigation of the anisotropic confinement-dependent brittle-ductile transition of a Utah coal

journal article published in 2021

Numerical assessment of the anisotropic strengths of a Utah coal considering the spatial characteristics of discontinuities using discrete fracture networks ⬇️

conference proceedings item published in 2021

Numerical investigation of factors involved in a floor heave mechanism in a bump-prone coal mine ⬇️

conference proceedings item published in 2019

Numerical parametric study of floor heave in gate roads caused by longwall-induced abutment loading ⬇️

conference proceedings item published in 2020

Performance analysis of instruments used to measure stress change resulting from mining ⬇️

conference proceedings item published in 2019

Rockmass permeability induced by longwall mining under deep cover: potential gas inflow from a sheared gas well ⬇️

conference proceedings item published in 2022

Rockmass permeability induced by longwall mining under deep cover: potential gas inflow from a sheared gas well

journal article published in 2022

Shale gas well casing deformation in longwall chain pillars under deep cover - field measurement and numerical modeling ⬇️

conference proceedings item published in 2022

Stability analysis of underground excavations in limestone under dynamic loading ⬇️

conference proceedings item published in 2023

Strength of Utah coal evaluated using laboratory tests with an unloading path

conference proceedings item published in 2022

Using UT3PC and LaModel to aid the mine engineer in evaluating mine layout design ⬇️

conference proceedings item published in 2023

Paulina is supported by:

About Paulina

Help