List of works - Peter Supancic

Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

scientific article published in May 2018

C-AFM and KPFM approach to investigate the electrical properties of single grain boundaries in ZnO varistor devices

Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

scientific article published in November 2017

Einfluss von Kontaktspannungen auf die Festigkeit im 4-Kugelversuch

Electrical characterization of ZnO multilayer varistors on the nanometre scale with conductive atomic force microscopy

Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

scientific article published in January 2016

Experimental approach to assess the effect of metallization on the strength of functional ceramic components

scientific article published in April 2012

Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

scientific article published in February 2021

Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

scientific article published in January 2011

Fracture of Ceramics

Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics

Fracture toughness of silicon nitride balls via thermal shock

Geometry Effect on the Thermal Shock Response of Al2O3/ZrO2 Multilayered Ceramics

scientific article published on 15 March 2007

Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

scientific article published in September 2018

Influence of Internal Architectures on the Fracture Response of LTCC Components

scientific article published in March 2009

Influence of deposited metal structures on the failure mechanisms of silicon-based components

scientific article published in December 2012

Influence of the Sample Size on the Results of B3B-Tests

Investigation of the Behavior of Multilayer Piezoelectric Actuators: Modeling and Experiments

scientific article published in January 2008

Local strength measurement technique for miniaturised silicon-based components

scientific article published in April 2011

Mechanical Properties of Ceramics

Mechanical properties of silicon nitride rolling elements in dependence of size and shape

Micro four-point probe investigation of individual ZnO grain boundaries in a varistor ceramic

Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

scientific article published in January 2010

Nonlinear Lock-In Infrared Microscopy: A Complementary Investigation Technique for the Analysis of Functional Electroceramic Components

scientific article published on 14 May 2015

Numerical investigation of the process of embedding components into Printed Circuit Boards

scientific article published in April 2011

On Bürmann’s Theorem and Its Application to Problems of Linear and Nonlinear Heat Transfer and Diffusion

Piezotronically modified double Schottky barriers in ZnO varistors

scientific article published on 05 February 2015

Precise determination of phonon constants in lead-free monoclinic (K0.5Na0.5)NbO3 single crystals

scientific article published on 6 January 2014

Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

Strength and fracture analysis of silicon-based components for embedding

scientific article published in April 2011

Strength distribution and fracture analyses of LiNbO 3 and LiTaO 3 single crystals under biaxial loading

scientific article published in November 2017

Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

scientific article published in May 2011

Surface crack in tension or in bending – A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials

List of works by Peter Supancic

Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

C-AFM and KPFM approach to investigate the electrical properties of single grain boundaries in ZnO varistor devices

Comparison of biaxial strength measured with the Ball-on-Three-Balls- and the Ring-on-Ring-test

Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

Einfluss von Kontaktspannungen auf die Festigkeit im 4-Kugelversuch

Electrical characterization of ZnO multilayer varistors on the nanometre scale with conductive atomic force microscopy

Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

Experimental approach to assess the effect of metallization on the strength of functional ceramic components

Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

Fatigue behaviour of WC-Co hard metal under stress ratio and effectively loaded volume relevant to metalworking tool failure

Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

Fracture of Ceramics

Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics

Fracture toughness of silicon nitride balls via thermal shock

Geometry Effect on the Thermal Shock Response of Al&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt;/ZrO&lt;sub&gt;2&lt;/sub&gt; Multilayered Ceramics

Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

Influence of Internal Architectures on the Fracture Response of LTCC Components

Influence of deposited metal structures on the failure mechanisms of silicon-based components

Influence of the Sample Size on the Results of B3B-Tests

Investigation of the Behavior of Multilayer Piezoelectric Actuators: Modeling and Experiments

Local strength measurement technique for miniaturised silicon-based components

Mechanical Properties of Ceramics

Mechanical properties of silicon nitride rolling elements in dependence of size and shape

Micro four-point probe investigation of individual ZnO grain boundaries in a varistor ceramic

Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

Nonlinear Lock-In Infrared Microscopy: A Complementary Investigation Technique for the Analysis of Functional Electroceramic Components

Numerical investigation of the process of embedding components into Printed Circuit Boards

On Bürmann’s Theorem and Its Application to Problems of Linear and Nonlinear Heat Transfer and Diffusion

Piezotronically modified double Schottky barriers in ZnO varistors

Precise determination of phonon constants in lead-free monoclinic (K0.5Na0.5)NbO3 single crystals

Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

Strength and fracture analysis of silicon-based components for embedding

Strength distribution and fracture analyses of LiNbO 3 and LiTaO 3 single crystals under biaxial loading

Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

Surface crack in tension or in bending – A reassessment of the Newman and Raju formula in respect to fracture toughness measurements in brittle materials

Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

The ball on three balls test—Strength and failure analysis of different materials

Thermal Shock Behavior of an Al 2 O 3 /ZrO 2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

Toughness measurement on ball specimens. Part I: Theoretical analysis

Understanding and controlling inversion boundaries in ZnO

Varistor piezotronics: Mechanically tuned conductivity in varistors

Voltage polarity dependent current paths through polycrystalline ZnO varistors

Geometry Effect on the Thermal Shock Response of Al<sub>2</sub>O<sub>3</sub>/ZrO<sub>2</sub> Multilayered Ceramics