Search filters

List of works by Raul Bermejo

Analysis on the mechanical strength of WC-Co cemented carbides under uniaxial and biaxial bending

article published in 2014

Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion

scientific article published in 2016

Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

scientific article published in May 2018

Comparison of Different Methods for Stress and Deflection Analysis in Embedded Die Packages During the Assembly Process

scientific article published in August 2015

Contact damage tolerance of alumina-based layered ceramics with tailored microstructures

scientific article published in June 2022

Design of alumina-zirconia composites with spatially tailored strength and toughness

scientific article published in February 2015

Design of damage tolerant and crack-free layered ceramics with textured microstructure

scientific article published in February 2020

Determination of Strength and Fracture Toughness of Small Ceramic Discs Using the Small Punch Test and the Ball-on-three-balls Test

scientific article published in 2014

Edge cracking due to a compressive residual stress in ceramic laminates

scientific article published in March 2015

Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2

Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firing

scientific article published in September 2022

Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

scientific article published in 2022

Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

scientific article published in November 2017

Effects of acid leaching treatment of soda‐lime silicate glass on crack initiation and fracture

scientific article published on 28 May 2021

Enhanced thermal shock response of Al 2 O 3 –graphite composites through a layered architectural design

scientific article published on 14 December 2018

Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

scientific article published in January 2016

Experimental approach to assess the effect of metallization on the strength of functional ceramic components

scientific article published in April 2012

Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

scientific article published in February 2021

Fatigue Behavior of Alumina–Zirconia Multilayered Ceramics

article

Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

scientific article published in January 2011

Fracture of Layered Ceramics

Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature

scientific article published in February 2010

Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells

scientific article published in February 2015

Geometry Effect on the Thermal Shock Response of Al<sub>2</sub>O<sub>3</sub>/ZrO<sub>2</sub> Multilayered Ceramics

scientific article published on 15 March 2007

Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

scientific article published on 26 December 2016

High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms

scientific article published in July 2010

High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells

scientific article published in January 2015

High-temperature mechanical behaviour of flaw tolerant alumina–zirconia multilayered ceramics

Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization

scientific article published on 21 March 2023

Improved Fracture Behavior of Alumina Microstructural Composites with Highly Textured Compressive Layers

scientific article published on 7 August 2014

Improved fracture behavior and mechanical properties of alumina textured ceramics

scientific article published in June 2018

Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

scientific article published in September 2018

Influence of Internal Architectures on the Fracture Response of LTCC Components

scientific article published in March 2009

Influence of acid leaching surface treatment on indentation cracking of soda lime silicate glass

scientific article published in September 2020

Influence of deposited metal structures on the failure mechanisms of silicon-based components

scientific article published in December 2012

Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC–Co cemented carbides

article by Yadir Torres et al published October 2008 in Engineering Fracture Mechanics

Influence of temperature on the biaxial strength of cemented carbides with different microstructures

scientific article published in February 2018

Influence of the T-stress on the Crack Bifurcation Phenomenon in Ceramic Laminates

scientific article published in 2014

Influence of the Test Configuration and Temperature on the Mechanical Behaviour of WC-Co

scientific article published on 29 February 2020

Layered Ceramics

scientific article published in 2013

Loading configuration effects on the strength reliability of alumina–zirconia multilayered ceramics

Local strength measurement technique for miniaturised silicon-based components

scientific article published in April 2011

Mechanical Characterization of Ceramics

scientific article published in 2014

Mechanical characterisation of miniaturised direct inkjet printed 3Y-TZP specimens for microelectronic applications

scientific article published in November 2010

Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes

Mechanical failure dependence on the electrical history of lead zirconate titanate thin films

scientific article published in April 2021

Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite

scientific article published on 27 July 2020

Mechanical strength of cold-sintered zinc oxide under biaxial bending

scientific article published on 27 November 2018

Microstructure, ionic conductivity and mechanical properties of tape-cast Li1.5Al0.5Ti1.5P3O12 electrolyte sheets

scientific article published in May 2020

Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion

scientific article published in November 2016

Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

scientific article published in January 2010

Multi-physics simulation of the component attachment within embedding process

scientific article published in April 2013

Multifunctional performance of Ti 2 AlC MAX phase/2D braided alumina fiber laminates

scientific article published on 29 July 2021

Ni–NiO composites obtained by controlled oxidation of green compacts

Novel colloidal approach for the microstructural improvement in Ti(C,N)/FeNi cermets

Numerical Analysis of Sub-critical Crack Growth in Particulate Ceramic Composites

scientific article published in 2014

Numerical investigation of the process of embedding components into Printed Circuit Boards

scientific article published in April 2011

On the determination of the stress-free temperature for alumina–zirconia multilayer structures

scientific article published in May 2014

Optimal strength and toughness of Al2O3–ZrO2 laminates designed with external or internal compressive layers

Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

scientific article published in July 2023

Prediction of ring crack initiation in ceramics and glasses using a stress–energy fracture criterion

scientific article published on 7 March 2023

Prediction of the crack bifurcation in layered ceramics with high residual stresses

scientific article published in August 2013

Preparation and photocatalytic activity of TiO2 nanotube arrays prepared on transparent spinel substrate

scientific article published in May 2021

Processing and characterisation of cermet/hardmetal laminates with strong interfaces

scientific article published in June 2014

Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

Raman spectroscopy for the investigation of indentation-induced domain texturing in lead zirconate titanate piezoceramics

scientific article published in August 2010

Residual Lifetime Determination of Low Temperature Co-Fired Ceramics

scientific article published in September 2016

Residual Stress Profile Determined by Piezo-Spectroscopy in Alumina/Alumina-Zirconia Layers Separated by a Compositionally Graded Intermediate Layer

scientific article published on 15 July 2005

Scaling up the cold sintering process of ceramics

scientific article published in April 2023

Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

scientific article published in April 2014

Stereolithographic 3D Printing of Ceramics: Challenges and Opportunities for Structural Integrity

scientific article published on 8 June 2022

Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates

scientific article published in June 2011

Strength and fracture analysis of silicon-based components for embedding

scientific article published in April 2011

Strength distribution and fracture analyses of LiNbO 3 and LiTaO 3 single crystals under biaxial loading

scientific article published in November 2017

Strength limits in mesoscaled 3Y-TZP ceramics for micro-surgical instruments

scientific article published on 04 December 2018

Strength of additive manufactured alumina

scientific article published in November 2020

Stress and Deflection Development During Die Embedding into Printed Circuit Boards

scientific article published in 2015

The Effect of Phase Composition on the Mechanical Properties of LTCC Material

scientific article published on 4 February 2013

The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

scientific article published in April 2023

Thermal Shock Behavior of an Al 2 O 3 /ZrO 2 Multilayered Ceramic with Residual Stresses due to Phase Transformations

Thickness Dependence of crack initiation and propagation in stacks for piezoelectric microelectromechanical systems

scientific article published in June 2020

Threshold strength evaluation on an Al2O3–ZrO2 multilayered system

Understanding the edge crack phenomenon in ceramic laminates

scientific article published on 28 September 2015

Understanding the tensile strength of ceramics in the presence of small critical flaws

scientific article published in October 2018

What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

scientific article published on 19 June 2018

“Toward seashells under stress”: Bioinspired concepts to design tough layered ceramic composites

scientific article published in October 2017