List of works - Clara Schuecker

A constitutive ply model for stiffness degradation and plastic strain accumulation: Its application to the Third World Wide Failure Exercise (Part A)

scientific article published on 30 April 2013

A continuum damage model for fiber reinforced laminates based on ply failure mechanisms

scientific article published in October 2006

Accounting for residual stresses in FEM analyses of laminated structures using the Puck criterion for three-axial stress states

scientific article published in October 2006

Advanced Engineering Materials 4∕2017

scientific article published in April 2017

Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling

scientific article published on 20 January 2022

Combining Elastic Brittle Damage with Plasticity to Model the Non-linear behavior of Fiber Reinforced Laminates

scientific article published in 2008

Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

scientific article published in April 2023

Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

scientific article published in December 2019

Constitutive ply damage modeling, FEM implementation, and analyses of laminated structures

scientific article published in May 2008

CrackDect: Detecting crack densities in images of fiber-reinforced polymers

scientific article published in December 2021

Damage and Failure in Layered Composite Structures

scientific article published in 2020

Efficient Finite Element Modeling of Steel Cables in Reinforced Rubber

scientific article published on 24 May 2022

Efficient prediction of crack initiation from arbitrary 2D notches

scientific article published in June 2022

Evaluation of the accuracy of the four-point bend end-notched flexure test for mode II delamination toughness determination

scientific article published in August 2000

Fatigue characterization of embedded layers in CFR Composites

scientific article published in 2019

Fiber Reinforced Laminates: Progressive Damage Modeling Based on Failure Mechanisms

scientific article published on 15 February 2008

Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

scientific article published on 26 December 2016

Improved concept for iterative crack propagation using configurational forces for targeted angle correction

scientific article published in May 2022

Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites

scientific article published in 2019

Material and structural response of polymer-matrix fibre-reinforced composites

scientific article published in September 2012

Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies

scientific article published on 29 December 2021

Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses

scientific article published in November 2004

Numerical simulation of delamination in laminated composite components – A combination of a strength criterion and fracture mechanics

scientific article published in March 2009

Optimization of the Specimen Geometry of Unidirectional Reinforced Composites with a Fibre Orientation of 90° for Tensile, Quasi-Static and Fatigue Tests

scientific article published in June 2019

Prediction of plastic strain accumulation in continuous fiber reinforced laminates by a constitutive ply model

scientific article published on 12 May 2009

Version 0.2 - CrackDect: Detecting crack densities in images of fiber-reinforced polymers

scientific article published in July 2022

List of works by Clara Schuecker