Search filters

List of works by Martin Pletz

A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact

scientific article published in November 2016

A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact

scientific article published in November 2013

A wheel passing a crossing nose: Dynamic analysis under high axle loads using finite element modelling*

scientific article published on 29 May 2012

A wheel set/crossing model regarding impact, sliding and deformation—Explicit finite element approach

scientific article published in July 2012

Assessing Failure in Steel Cable-Reinforced Rubber Belts Using Multi-Scale FEM Modelling

scientific article published on 20 January 2022

Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

scientific article published on 3 May 2022

Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

scientific article published in April 2023

Comparison of Different Methods for Stress and Deflection Analysis in Embedded Die Packages During the Assembly Process

scientific article published in August 2015

Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

scientific article published in December 2019

CrackDect: Detecting crack densities in images of fiber-reinforced polymers

scientific article published in December 2021

Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

scientific article published in October 2019

Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

scientific article published in September 2021

Efficient Finite Element Modeling of Steel Cables in Reinforced Rubber

scientific article published on 24 May 2022

Efficient prediction of crack initiation from arbitrary 2D notches

scientific article published in June 2022

Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

scientific article published in January 2016

Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

scientific article published on 12 September 2018

Improved concept for iterative crack propagation using configurational forces for targeted angle correction

scientific article published in May 2022

Incremental finite element delamination model for fibre pull-out tests of elastomer-matrix composites

scientific article published in 2019

Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

scientific article published on 21 March 2023

Influence of deposited metal structures on the failure mechanisms of silicon-based components

scientific article published in December 2012

Ingested microplastics: Do humans eat one credit card per week?

scientific article published in November 2022

Investigation of deformation mechanisms in manganese steel crossings using FE models

scientific article published in October 2019

Local strength measurement technique for miniaturised silicon-based components

scientific article published in April 2011

Modeling Stiffness Degradation of Fiber-Reinforced Polymers Based on Crack Densities Observed in Off-Axis Plies

scientific article published on 29 December 2021

Multi-physics simulation of the component attachment within embedding process

scientific article published in April 2013

Multi-scale finite element modeling to describe rolling contact fatigue in a wheel–rail test rig

scientific article published in December 2014

Numerical Analysis of Sub-critical Crack Growth in Particulate Ceramic Composites

scientific article published in 2014

Numerical assessment of materials used in railway crossings by predicting damage initiation – Validation and application

scientific article published in November 2018

Numerical investigation of the process of embedding components into Printed Circuit Boards

scientific article published in April 2011

Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

scientific article published on 19 April 2023

Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

scientific article published in October 2018

Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

scientific article published in November 2017

Process Optimization of Injection Overmolding Structural Electronics with Regard to Film Distortion

scientific article published on 22 November 2022

Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

scientific article published on 16 April 2019

Residual Lifetime Determination of Low Temperature Co-Fired Ceramics

scientific article published in September 2016

Rolling contact fatigue of three crossing nose materials—Multiscale FE approach

scientific article published in June 2014

Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF Models

scientific article published on 16 December 2022

Simplified explicit finite element model for the impact of a wheel on a crossing – Validation and parameter study

scientific article published in July 2017

Simulation of stress distribution in assembled silicon dies and deflection of printed circuit boards

scientific article published in April 2014

Strength and fracture analysis of silicon-based components for embedding

scientific article published in April 2011

Stress and Deflection Development During Die Embedding into Printed Circuit Boards

scientific article published in 2015

Version 0.2 - CrackDect: Detecting crack densities in images of fiber-reinforced polymers

scientific article published in July 2022