Search filters

List of works by Werner Daves

A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact

scientific article published in November 2016

A finite element modelling approach for the numerical analysis of switch rail contact loading and cyclic profile degradation

scientific article published on 24 April 2022

A new roughness parameter to evaluate the near-surface deformation in dry rolling/sliding contact

scientific article published in November 2013

A possible origin of surface cracks in rails

scientific article published on 16 June 2011

A wheel passing a crossing nose: Dynamic analysis under high axle loads using finite element modelling*

scientific article published on 29 May 2012

A wheel set/crossing model regarding impact, sliding and deformation—Explicit finite element approach

scientific article published in July 2012

A whole system model framework to predict damage in turnouts

scientific article

Advanced maintenance strategies for improved squat mitigation

scientific article published in October 2019

Analysis of crack growth under rolling-sliding contact

scientific article published in April 2019

Analysis of rail milling as a rail maintenance process: Simulations and experiments

scientific article published in November 2019

Application of 2D finite element analysis to compare cracking behaviour in twin-disc tests and full scale wheel/rail experiments

scientific article published in January 2016

Assessment of methods for calculating contact pressure in wheel-rail/switch contact

scientific article published in October 2008

Calculation of crack driving forces of surface cracks subjected to rolling/sliding contact

scientific article published in February 2016

Computational micromechanics of multiphase materials

scientific article published in July 1992

Crack Growth Tendency of Surface Shear Cracks in Rolling Sliding Contact

scientific article published in November 2013

Crack path investigations in a pearlitic rail steel after pre-deformation under cyclic Mode-II loading

scientific article published in 2022

Cracks Loaded by Rolling Contact - Influence of Plasticity around the Crack

scientific article published in December 2016

Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

scientific article published in February 2019

Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

scientific article published in October 2019

Deformation and damage of a crossing nose due to wheel passages

scientific article published in October 2008

Effect of shot peening on residual stresses and crack closure in CVD coated hard metal cutting inserts

scientific article published in August 2019

FE temperature- and residual stress prediction in milling inserts and correlation with experimentally observed damage mechanisms

scientific article published in June 2018

Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading

scientific article published in 2022

Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

scientific article published on 12 September 2018

Finite element study of the influence of hard coatings on hard metal tool loading during milling

scientific article published in October 2016

Four Different Numerical Approaches of Calculating Strains and Stresses During Impact in Wheel-Rail Rolling Contact

scientific article published in January 2005

Investigation of deformation mechanisms in manganese steel crossings using FE models

scientific article published in October 2019

Microscopic investigation of surface layers on rails

scientific article published in January 2005

Modelling of the plastification near the rough surface of a rail by the wheel–rail contact

scientific article published in July 2002

Multi-scale finite element modeling to describe rolling contact fatigue in a wheel–rail test rig

scientific article published in December 2014

Near surface deformation of rails and wheels in a curve and during acceleration and braking

scientific article published in February 2008

Numerical assessment of materials used in railway crossings by predicting damage initiation – Validation and application

scientific article published in November 2018

Plastification and Damage in Wheel-Rail Rolling Contact - Case Study on a Crossing

scientific article published in December 2005

Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

scientific article published on 16 April 2019

Rolling contact fatigue of three crossing nose materials—Multiscale FE approach

scientific article published in June 2014

Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including stress-strain curves for WC as a function of temperature

scientific article published in December 2019

Simplified Damage Assessment Tool for Rails and Crossings Based on Standard Wear and RCF Models

scientific article published on 16 December 2022

Simplified explicit finite element model for the impact of a wheel on a crossing – Validation and parameter study

scientific article published in July 2017

Squat initiation mechanism model in a rail-wheel contact

scientific article published in June 2022

Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

scientific article published in January 2020

Thermal crack formation in TiCN/α-Al2O3 bilayer coatings grown by thermal CVD on WC-Co substrates with varied Co content

scientific article published in June 2020

Paulina is supported by:

About Paulina

Help