Search filters

List of works by Václav Novotný

3D Printing in Turbomachinery: Overview of Technologies, Applications and Possibilities for Industry 4.0

scientific article published on 17 June 2019

3D printed radial impulse cantilever micro-turboexpander for preliminary air testing

scientific article published in 2021

Absorption Power Cycles with Various Working Fluids for Exergy-Efficient Low-Temperature Waste Heat Recovery

scientific article published in 2018

Absorption Power and Cooling Combined Cycle with an Aqueous Salt Solution as a Working Fluid and a Technically Feasible Configuration

scientific article published on 21 June 2021

Absorption power cycle with a 3D-printed plastic micro turboexpander - Considerations, design and first experimental results

scientific article published in 2021

Absorption power cycles for low-temperature heat sources using aqueous salt solutions as working fluids

scientific article published on 21 November 2016

Analysis and Design of Novel Absorption Power Cycle Plants

scientific article published on 26 June 2016

Conversion of combined heat and power coal-fired plants to Carnot batteries - Prospective sites for early grid-scale applications

scientific article published in November 2022

Customized ORC micro turbo-expanders - From 1D design to modular construction kit and prospects of additive manufacturing

scientific article published in October 2020

Design and Manufacturing of a Metal 3D Printed kW Scale Axial Turboexpander

scientific article published on 17 June 2019

Design of Experimental Rig for Validation of Absorption Power Cycle Concept

scientific article published in May 2017

Direct integration of an organic Rankine cycle into an internal combustion engine cooling system for comprehensive and simplified waste heat recovery

scientific article published in November 2021

Economic aspects of micro-cogeneration systems — Insight into investors' approaches

scientific article published in May 2018

Experience from set-up and pilot operation of an in-house developed biomass-fired ORC microcogeneration unit

scientific article published in March 2021

Experimental development of a kilowatt-scale biomass fired micro – CHP unit based on ORC with rotary vane expander

scientific article published in March 2020

Experimental investigation of combustion engine with novel jacket and flue gas heat recovery

scientific article published in November 2022

Experimental rig for LiBr-water absorption power cycle - design and first experimental results

scientific article published in 2018

Gear pump for low power output ORC – an efficiency analysis

scientific article published in September 2017

Impact of major leakages on characteristics of a rotary vane expander for ORC

scientific article published in September 2017

Implementing large scale electromobility infrastructure as a profitable virtual electricity storage plant: A case study, system ALISE

scientific article published in May 2018

Intermediate pressure reboiling in geothermal flash plant for increased power production and more effective non-condensable gas abatement

scientific article published in February 2020

Minimizing the Energy and Economic Penalty of CCS Power Plants Through Waste Heat Recovery Systems

scientific article published in March 2017

Possibilities of water-lithium bromide absorption power cycles for low temperature, low power and combined power and cooling systems

scientific article published in September 2017

Preliminary prospects of a Carnot-battery based on a supercritical CO2 Brayton cycle

scientific article published on 31 October 2021

Review of Carnot Battery Technology Commercial Development

scientific article published on 17 January 2022

Techno-economic comparison of three technologies for pre-combustion CO2 capture from a lignite-fired IGCC

scientific article published on 25 October 2019

Theoretical and experimental investigations on the radial and axial leakages within a rotary vane expander

scientific article published in December 2019

Thin-film nanocomposite membrane with vertically embedded carbon nanotube for forward osmosis

scientific article published on 20 June 2016

Towards development of 1-10 kW pilot ORC units operating with hexamethyldisiloxane and using rotary vane expander

scientific article published in September 2017

WEAR BEHAVIOUR OF VANES FOR A ROTARY VANE EXPANDER WITH VARIOUS GRAPHITE MATERIALS UNDER DRY SLIDING CONDITIONS

scientific article published on 31 October 2018

Paulina is supported by:

About Paulina

Help