List of works - John Botsis

A Study of the Shear Response of a Lead-Free Composite Solder by Experimental and Homogenization Techniques

scientific article published on 7 July 2009

An experimental–numerical investigation of hydrothermal response in adhesively bonded composite structures

scientific article published in June 2015

An experimental–numerical study of moisture absorption in an epoxy

scientific article published in July 2012

Analysis of hygrothermally induced fiber fracture in single fiber composite using fiber Bragg grating

scientific article published in 2010

Bone reactions to controlled loading of endosseous implants: a pilot study.

scientific article published on November 2008

Characterization of embedded fiber Bragg grating sensors written in high-birefringent optical fibers subjected to transverse loading

Characterization of the response of fibre Bragg grating sensors subjected to a two-dimensional strain field

Crack – fiber sensor interaction and characterization of the bridging tractions in mode I delamination

scientific article published in April 2011

Deformation characteristics of composite laminates—part I: speckle interferometry and embedded Bragg grating sensor measurements

Deformation characteristics of composite laminates—part II: an experimental/numerical study on equivalent single-layer theories

Delamination detection and characterisation of bridging tractions using long FBG optical sensors

scientific article published in October 2007

Delamination in cross-ply laminates: Identification of traction–separation relations and cohesive zone modeling

article published in 2015

Distributed strain measurements using fiber Bragg gratings in small-diameter optical fiber and low-coherence reflectometry

scientific article published on December 2010

Durability Analysis of SnAgCu Solder Joints for an Aerospace Application

scientific article published in October 2008

Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens

scientific article published in December 2016

External mechanical microstimuli modulate the osseointegration of titanium implants in rat tibiae

scientific article published on 3 December 2013

Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol.

scientific article published on 3 June 2013

Fatigue resistance of ITI implant-abutment connectors -- a comparison of the standard cone with a novel internally keyed design.

scientific article published in October 2002

Fracture properties of aged and post-processed dental composites

scientific article published on 01 April 1998

Fracture studies of selected dental restorative composites.

scientific article published in May 1997

High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors

scientific article published in July 2010

Hydro-mechanical coupling in the periodontal ligament: a porohyperelastic finite element model

scientific article

Identification of the matrix elastoplastic properties in reinforced active brazing alloys

scientific article published in June 2008

Implementation of the "loaded implant" model in the rat using a miniaturized setup--description of the method and first results

scientific article published on 06 December 2011

In vitro time-dependent response of periodontal ligament to mechanical loading.

scientific article published on 18 August 2005

Influence of gait loads on implant integration in rat tibiae: experimental and numerical analysis

scientific article published on 08 September 2014

Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture

Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture

Interfacial Intermetallic Growth and Strength of Composite Lead-Free Solder Alloy Through Isothermal Aging

scientific article published on 29 July 2008

Isothermal Ageing of SnAgCu Solder Alloys: Three-Dimensional Morphometry Analysis of Microstructural Evolution and Its Effects on Mechanical Response

Load response of periodontal ligament: assessment of fluid flow, compressibility, and effect of pore pressure

scientific article published on 01 January 2010

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part I: Impact detection and localization

scientific article published in January 2012

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part II: Damage identification

scientific article published in January 2012

Mechanical behavior of bovine periodontal ligament under tension-compression cyclic displacements

scientific article published on 01 February 2006

Mechanical response of periodontal ligament: effects of specimen geometry, preconditioning cycles and time lapse

scientific article published on 7 August 2009

Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder

scientific article published in January 2013

Mixed mode fracture behavior of welded wood joints investigated with the Arcan test

Modeling of the residual stresses acting on a low-birefringence fiber Bragg grating sensor embedded in an epoxy matrix

Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors

scientific article published in February 2013

Monitoring of hygrothermal ageing effects in an epoxy resin using FBG sensor: A methodological study

scientific article published in March 2009

Monitoring of process induced strains in a single fibre composite using FBG sensor: A methodological study

scientific article published in July 2008

Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure

Numerical and statistical estimates of the representative volume element of elastoplastic random composites

scientific article published in May 2012

Numerical prediction of peri-implant bone adaptation: Comparison of mechanical stimuli and sensitivity to modeling parameters

scientific article published on 15 September 2016

ON THE DEGREE OF CONVERSION AND COEFFICIENT OF THERMAL EXPANSION OF A SINGLE FIBER COMPOSITE USING A FBG SENSOR

scientific article published in 2008

On the Mutual Effect of Viscoplasticity and Interfacial Damage Progression in Interfacial Fracture of Lead-Free Solder Joints

scientific article published on 10 August 2011

On the effects of the lateral strains on the fiber Bragg grating response

scientific article published on 21 February 2013

Oscillatory shear loading of bovine periodontal ligament--a methodological study