A Critical Reanalysis of Uncontrollable Washboarding Phenomenon in Metal Band Sawing

scientific article published on 09 October 2020

A Method and Device for 3D Recognition of Cutting Edge Micro Geometry

A newly-developed model for predicting cutting power during wood sawing with circular saw blades

An Innovative Approach to the Forecasting of Energetic Effects While Wood Sawing

Application of fracture mechanics for energetic effects predictions while wood sawing

Characterization of Arctic Driftwood as Naturally Modified Material. Part 1: Machinability

Economical Wood Sawing with Circular Saw Blades of a New Design

Effect of Thermal Treatment of Birch Wood by Saturated Water Vapor on Granulometric Composition of Chips from Sawing and Milling Processes from the Point of View of Its Processing to Composites

Effect of pine impregnation and feed speed on sound level and cutting power in wood sawing

Effect of the Drying Method of Pine and Beech Wood on Fracture Toughness and Shear Yield Stress

scientific article published on 21 October 2020

Estimation of fracture toughness and shear yield stress of orthotropic materials in cutting with rotating tools

Experimental Examination and Modification of Chip Suction System in Circular Sawing Machine

Experimental research of the effect of face milling strategy on the flatness deviations

Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw

article by Tomasz Rogoziński et al published 16 October 2020 in European Journal of Wood and Wood Industries

MACHINE VISION DETECTION OF THE CIRCULAR SAW VIBRATIONS

Mechatronic System for Automatic Inspection of Circular Saw Teeth

On-Line Measurement of Wood Surface Smoothness

Recent progress in research on the cutting processes of wood. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture

Revisiting the estimation of cutting power with different energetic methods while sawing soft and hard woods on the circular sawing machine: a Central European case

Study washboarding phenomenon in frame sawing machines

Surface Roughness Evaluation in Thin EN AW-6086-T6 Alloy Plates after Face Milling Process with Different Strategies

scientific article

THE EFFECT OF ALTERNATIVE CUTTER PATHS ON FLATNESS DEVIATIONS IN THE FACE MILLING OF ALUMINUM PLATE PARTS

The Design Development of the Sliding Table Saw Towards Improving Its Dynamic Properties

article by Kazimierz A Orlowski et al published 21 October 2020 in Applied sciences

The critical rotational speed of circular saw: simple measurement method and its practical implementations

The effect of beech wood (Fagus sylvatica L.) steaming process on the colour change versus depth of tested wood layer

scientific article